Effect of mechanical alloying on microstructure and mechanical properties of Ti-24Nb-4Zr-3Mn alloys prepared by spark plasma sintering
Source abstract
Abstract
In the present study, Ti-24Nb-4Zr-3Mn alloys were prepared by mechanical alloying and spark plasma sintering. With the increase of milling time, the particle size of alloy powder decreases, while the oxygen content shows the opposite trend. The excess O content will dramatically deteriorate the mechanical properties of Ti-24Nb-4Zr-3Mn alloy and should be strictly controlled in future studies. Among all the investigated alloys, Ti-24Nb-4Zr-3Mn alloy prepared by 20-hour milling powder (TNZM-20) shows excellent comprehensive mechanical properties with a preferable compressive strength (∼2786 MPa) and constant strain (∼ 55.3 %), as well as a highest tensile strength (∼1148 MPa) and elongation (∼11.2 %), which attribute to the combined effect of almost full density, fine grain strengthening and solid solution strengthening together with dispersion strengthening provided by FCC phase. Interestingly, the excellent combination of high strength and low elastic modulus of metastable β alloy can be obtained by manipulating the content of the FCC phase, providing a new approach for fabricating high-performance metastable β Ti alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Effects of sintering conditions on mechanical properties of biomedical porous Ti produced by spark plasma sintering10.7567/JJAP.52.01AE03 ↗
2. A review on biomedical titanium alloys: recent progress and prospect10.1002/adem.201801215 ↗
3. Development of new metallic alloys for biomedical applications10.1016/j.actbio.2012.06.037 ↗
4. A review on alloy design, biological response, and strengthening of beta-titanium alloys as biomaterials10.1016/j.msec.2020.111661 ↗
5. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review10.1016/j.biomaterials.2016.01.012 ↗
6. Designing biocompatible Ti-based metallic glasses for implant applications10.1016/j.msec.2012.11.015 ↗
7. General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters10.1016/j.scriptamat.2006.04.022 ↗
8. A review of metastable beta titanium alloys10.3390/met8070506 ↗
9. New developments of ti-based alloys for biomedical applications10.3390/ma7031709 ↗
10. Recent development in beta titanium alloys for biomedical applications10.3390/met10091139 ↗
11. Comprehensive review on alloy design, processing, and performance of β Titanium alloys as biomedical materials
12. Microstructures, mechanical properties and cytotoxicity of low cost beta Ti–Mn alloys for biomedical applications10.1016/j.actbio.2015.08.015 ↗
13. Improvement in mechanical strength of low-cost β-type Ti–Mn alloys fabricated by metal injection molding through cold rolling10.1016/j.jallcom.2015.12.200 ↗
14. Development of a novel fcc structure for an amorphous-nanocrystalline Ti-33Nb-4Mn (at %) ternary alloy10.1016/j.matchar.2017.11.021 ↗
15. Preparation of TiMn alloy by mechanical alloying and spark plasma sintering for biomedical applications10.1088/1742-6596/144/1/012007 ↗
16. Fabrication of low-cost beta-type Ti–Mn alloys for biomedical applications by metal injection molding process and their mechanical properties10.1016/j.jmbbm.2016.02.035 ↗
17. Mechanical properties and microstructure of Ti-Mn alloys produced via powder metallurgy for biomedical applications10.1016/j.jmbbm.2018.12.005 ↗
18. A new look at biomedical Ti-based shape memory alloys10.1016/j.actbio.2012.01.018 ↗
19. Characterization and corrosion behaviour of Ti-13Nb-13Zr alloy prepared by mechanical alloying and spark plasma sintering
20. Study of low-modulus biomedical beta Ti-Nb-Zr alloys based on single-crystal elastic constants modeling10.1016/j.jmbbm.2016.04.040 ↗
21. Fabrication of nano-grained Ti–Nb–Zr biomaterials using spark plasma sintering10.1016/j.matdes.2015.08.082 ↗
22. Strengthening mechanism and corrosion resistance of beta-type Ti-Nb-Zr-Mn alloys10.1016/j.msec.2020.110728 ↗
23. Development of biomedical Ti-Nb-Zr-Mn alloys with enhanced mechanical properties and corrosion resistance
24. Influence of powder properties on densification mechanism during spark plasma sintering10.1016/j.scriptamat.2017.06.034 ↗
25. Densification mechanisms in spark plasma sintering: Effect of particle size and pressure10.1016/j.powtec.2012.01.005 ↗
26. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
27. Effect of mechanical alloying on the microstructure and properties of W–Ti alloys fabricated by spark plasma sintering10.1016/j.powtec.2016.08.039 ↗
28. Effect of mechanical alloying on microstructure and mechanical properties of hot-pressed Nb–16Si alloys10.1016/j.msea.2010.02.031 ↗
29. Fabrication of ultrafine grained FeCrAl-0.6 wt% ZrC alloys with enhanced mechanical properties by spark plasma sintering10.1016/j.apt.2021.02.041 ↗
30. Face-centered-cubic titanium - a new crystal structure of Ti in a Ti-8Mo-6Fe alloy10.1016/j.jallcom.2018.03.218 ↗
31. Structural Study of Novel Nanocrystalline FCC Ti-Ta-Sn Alloy10.1007/s11661-019-05152-w ↗
32. Biomedical TiNbZrTaSi alloys designed by d-electron alloy design theory10.1016/j.matdes.2015.06.176 ↗
33. Microstructure evolution and superelasticity of Ti-24Nb-xZr alloys fabricated by spark plasma sintering10.1016/j.jallcom.2020.153875 ↗
34. Mechanical properties of biomedical titanium alloys10.1016/S0921-5093(97)00806-X ↗
35. Design and fabrication of a metastable beta-type titanium alloy with ultralow elastic modulus and high strength10.1038/srep14688 ↗
36. Design and mechanical properties of new β type titanium alloys for implant materials10.1016/S0921-5093(97)00808-3 ↗
37. Multi-scale nacre-inspired lamella-structured Ti-Ta composites with high strength and low modulus for load-bearing orthopedic and dental applications10.1016/j.msec.2020.111458 ↗
38. The effect of Zr content on the microstructure, mechanical properties and cell attachment of Ti–35Nb–xZr alloys10.1088/1748-6041/5/4/045006 ↗
39. Epitaxial growth of titanium thin films10.1116/1.1315691 ↗
40. Enhancement of TiZr ductility by hcp–fcc martensitic transformation after severe plastic deformation10.1016/j.msea.2013.11.085 ↗
41. Formation of face-centered-cubic titanium by mechanical attrition10.1063/1.1530718 ↗
42. Formation of the metastable FCC phase by ball milling and annealing of titanium–stearic acid powder10.1016/j.apt.2015.01.013 ↗
43. Formation of a metastable fcc phase and high Mg solubility in the Ti-Mg system by mechanical alloying10.1016/j.powtec.2020.07.053 ↗
44. Effects of Zr addition on the deformation behavior, microstructure and mechanical properties of dental Ti alloys10.1016/j.msea.2020.139808 ↗
45. Could face-centered cubic titanium in cold-rolled commercially-pure titanium only be a Ti-hydride?10.1016/j.scriptamat.2019.11.010 ↗
46. The origin and the effect of the fcc phase in sintered HfNbTaTiZr10.1016/j.matlet.2020.129224 ↗
47. Interstitial carbon induced FCC-Ti exhibiting ultrahigh strength in a Ti37Nb28Mo28-C7 complex concentrated alloy10.1016/j.actamat.2020.10.075 ↗
48. Influence of the Mn content on the TiNbxMn alloys with a novel fcc structure10.1016/j.jallcom.2018.02.306 ↗
49. Influence of powder shape on atomic diffusivity and resultant densification mechanisms during spark plasma sintering10.1016/j.jallcom.2019.06.176 ↗
50. Stiffness predictions for unidirectional short-fiber composites: review and evaluation10.1016/S0266-3538(98)00120-1 ↗
51. Fabrication of biomedical Ti-24Nb-4Zr-8Sn alloy with high strength and low elastic modulus by powder metallurgy10.1016/j.jallcom.2018.08.262 ↗
52. Compressive and biocorrosion properties of Ti-XAl-2Fe-3Cu alloys fabricated by powder metallurgy