Microstructure characters of W-based composites with different immiscible second phases prepared by laser powder bed fusion
Source abstract
Abstract
W-based composites with the different immiscible second phases (Cu and Cu10Sn) were prepared by laser powder bed fusion (LPBF). The immiscible W phase and Cu/α-Cu phases were prone to separate during LPBF. The melted W phase could easily fuse together and form W matrix, and Cu or α-Cu phase distributed within the gaps among W phase. Cu or α-Cu phase can provide a gradient cooling way for the solidification of W phase through the transformation of ‘solid-liquid-gas’ during LPBF. The evaporation of Cu or Sn accelerated the heat dissipation, which caused the grain refinement of W. Higher thermal conductivity of Cu than α-Cu leads to the relative finer grain size of W phase in W-Cu composite. The heat conduction direction between W phase and Cu/α-Cu also affected the grain morphology. Heat continued transferred from W to Cu/α-Cu induced the columnar grain growth of W, the interlacing distribution of W and Cu/α-Cu made the growth of W columnar grains radiate out from the center Cu/α-Cu phase. Remarkable, cracks were severely restrained in W phase simultaneously although W phase melted completely. This is not only related to improvement of strength and ductility of W caused by grain refinement, but also because of the interlacing distribution of W and Cu/α-Cu phases, which could effectively reduce the stress degree in W phase during LBPF .
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Additive Manufacturing Materials and Processes · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Microstructure and properties of W Cu composites reinforced by in-situ generated WC10.1016/j.ijrmhm.2021.105585 ↗
2. Progress, challenges and potentials/trends of tungsten-copper (W Cu) composites/pseudo-alloys: fabrication, regulation and application10.1016/j.ijrmhm.2021.105648 ↗
3. Microstructure and properties of the WCu pseudo-alloy doped with chemically synthesized WMo nanopowders10.1016/j.jallcom.2021.161286 ↗
4. The effect of microstructural aspects of W Cu composites on electrical conductivity and thermal erosion10.1016/j.ijrmhm.2021.105685 ↗
5. Characterization of laser-powder interaction and particle transport phenomena during laser direct deposition of W-Cu composite
6. Effects of microalloying elements added by in situ synthesis on the microstructure of WCu composites10.1515/ntrev-2022-0045 ↗
7. Surface modification of Cu-W powder metallurgical alloy induced by high-current pulsed electron beam10.1016/j.powtec.2017.11.037 ↗
8. Selective laser melting W–10 wt% Cu composite powders10.1007/s00170-009-2304-4 ↗
9. Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L10.1016/j.actamat.2020.07.063 ↗
10. Cracking in laser additively manufactured W: initiation mechanism and a suppression approach by alloying10.1016/j.matdes.2018.12.010 ↗
11. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
12. Laser 3D printing of W-Cu composite10.1016/j.matlet.2018.04.114 ↗
13. Densified W Cu composite fabricated via laser additive manufacturing10.1016/j.ijrmhm.2019.105122 ↗
14. Microstructure, thermal physical property and surface morphology of W-Cu composite fabricated via selective laser melting10.1016/j.matdes.2016.07.049 ↗
15. Selective laser melting of bulk immiscible alloy with enhanced strength: heterogeneous microstructure and deformation mechanisms10.1016/j.jmst.2021.06.062 ↗
16. Hierarchical microstructure and strengthening mechanism of Cu-36.8Fe alloy manufactured by selective laser melting10.1016/j.jallcom.2021.162701 ↗
17. Laser powder bed fusion of ultrahigh strength Fe-Cu alloys using elemental powders
18. Additive manufacturing of high strength copper alloy with heterogeneous grain structure through laser powder bed fusion10.1016/j.actamat.2021.117311 ↗
19. Processing of new materials by additive manufacturing: iron-based alloys containing silver for biomedical applications10.1007/s11661-015-2932-2 ↗
20. A model for the thermal properties of liquid-phase sintered composites10.1007/BF02657849 ↗
21. Understanding of process and material behaviours in additive manufacturing of Invar36/Cu10Sn multiple material components via laser-based powder bed fusion
22. The study of antibacterial properties of iron oxide nanoparticles synthesized using the extract of lichen Ramalina sinensis
23. Large scale synthesis of nanocrystalline tungsten powders through recycling of tungsten heavy alloy scrap10.1016/j.mtcomm.2017.04.005 ↗
24. The Phoenix-like noble metal: Cu10.1021/acs.cgd.7b01317 ↗
25. Effects of aluminium on sintered properties of Cu-10wt%Sn bearing
26. Hierarchical microstructures enabled excellent low-temperature strength-ductility synergy in bulk pure tungsten10.1016/j.actamat.2022.117765 ↗
27. Additive manufacturing of isotropic-grained, high-strength and high-ductility copper alloys
28. Evaluation of solution-cathode glow discharge atomic emission spectrometry for the analysis of nanoparticle containing solutions10.1016/j.sab.2020.106040 ↗
29. Thermodynamic properties of copper10.1007/s11669-015-0399-x ↗
30. Vaporization of alloying elements and explosion behavior during laser powder bed fusion of Cu–10Zn alloy10.1016/j.ijmachtools.2020.103686 ↗
31. Selective separation and recovery of valuable metals by vacuum distillation of copper anode slime flotation tailings10.1007/s11837-019-03479-8 ↗
32. Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium10.1088/0022-3727/40/18/037 ↗
33. Thermodynamic properties of Tungsten10.1007/s11669-018-0689-1 ↗
34. Reference correlations for the thermal conductivity of liquid copper, gallium, indium, iron, lead, nickel and tin
35. Analysis of laser-induced microcracking in tungsten under additive manufacturing conditions: experiment and simulation10.1016/j.actamat.2020.04.060 ↗
36. Explore the feasibility of fabricating pure copper parts with low-laser energy by selective laser melting10.1088/2053-1591/abbd08 ↗
37. Numerical and experimental study of molten pool behaviour and defect formation in multi-material and functionally graded materials laser powder bed fusion10.1016/j.apt.2021.09.036 ↗
38. Analytical expressions for thermophysical properties of solid and liquid tungsten relevant for fusion applications10.1016/j.nme.2017.08.002 ↗
39. Cracking behavior in additively manufactured pure Tungsten10.1007/s40195-018-0752-2 ↗
40. Selective laser melting of tungsten and tungsten alloys10.1016/j.ijrmhm.2017.12.005 ↗
41. High-density tungsten fabricated by selective laser melting: densification, microstructure, mechanical and thermal performance10.1016/j.optlastec.2019.03.018 ↗