Temperature dependence of tensile behavior, deformation mechanisms and fracture in nitrogen-alloyed FeMnCrNiCo(N) Cantor alloys
Source abstract
Abstract
Among a family of the multi-principle-element alloys, a high-entropy Cantor alloy attracts much attention due to the striking temperature dependence of strength properties, strong grain boundary hardening and the excellent low-temperature ductility. Cantor alloy is a substitutional concentrated solid solution, thus, its strength properties and strain hardening could be additionally enhanced by interstitial hardening. Here we explore the effect of nitrogen alloying with atomic concentrations of 0.8%, 1.4% and 1.6% on a temperature dependence (temperature range from 77 to 473 K) of the microstructure, mechanical properties, and fracture micromechanisms of FeMnCrNiCo alloy with the focus on low-temperature deformation regime. Nitrogen-alloying promotes the expansion of a crystal lattice with a linear increase of a lattice parameter of the alloy with nitrogen content, ∆ a/∆ C N = 0.625 pm/at%. Nitrogen-bearing FeMnCrNiCo(N) alloys possess stronger temperature dependence of a yield strength relative to the Cantor alloy, and nitrogen forces both athermal and thermal components of the stress. The solid-solution strengthening of Cantor alloy is proportional to the nitrogen concentration Δ τ ~ C N, and the value (ΔYS/Δ C N) for the coarse-grained FeMnCrNiCo(N) alloys is a temperature-dependent parameter (ΔYS/ΔC N = 97 MPa/at% at RT and ΔYS/ΔC N = 146 MPa/at% at 77 K). Dislocation slip is a dominating deformation mechanism of the nitrogen-alloyed alloys along the whole range of the deformation temperatures. A decrease in test temperature and nitrogen-alloying both force the tendency to the planar slip and facilitate strain hardening. Despite a weak effect of nitrogen on a stacking fault energy of the Cantor alloy and high deforming stresses in FeMnCrNiCo(N) alloys, nitrogen-containing alloys show low activity of the mechanical twinning. Opposite effects of the nitrogen-alloying on the elongation of the Cantor alloy were found for different deformation regimes: positive at T > 250 K (elongation increases with nitrogen-alloying) and negative at T < 250 K (it decreases in nitrogen-bearing alloys). For FeMnCrNiCo(N) alloys, the appearance of the ductile-to-brittle transition in low-temperature deformation regime is associated with the brittle intergranular fracture of the specimens alloyed with nitrogen C N ≥ 1.4 at%.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Nanostructured high entropy alloys with multiple principle elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
4. Microstructure and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
5. Functional properties and promising applications of high entropy alloys10.1016/j.scriptamat.2020.06.017 ↗
6. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
7. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
8. Exceptionally high strain-hardening and ductility due to transformation induced plasticity effect in Ti-rich high-entropy alloys10.1038/s41598-020-70298-2 ↗
9. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
10. Precipitation and micromechanical behavior of the coherent ordered nanoprecipitation strengthened Al-Cr-Fe-Ni-V high entropy alloy10.1016/j.actamat.2021.117121 ↗
11. Interstitial equiatomic CoCrFeMnNi high-entropy alloys: carbon content, microstructure, and compositional homogeneity: effects on deformation behavior10.1016/j.actamat.2018.10.050 ↗
12. Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy10.1016/j.msea.2020.139242 ↗
13. Effect of carbon on cryogenic tensile behavior of CoCrFeMnNi-type high entropy alloys10.1016/j.jallcom.2019.152000 ↗
14. Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys10.1016/j.jallcom.2015.05.224 ↗
15. C and N doping in high-entropy alloys: a pathway to achieve desired strength-ductility synergy
16. Multicomponent high-entropy Cantor alloys10.1016/j.pmatsci.2020.100754 ↗
17. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
18. The effect of irradiation on CrMnFeCoNi high-entropy alloy and its derivatives10.1016/j.pmatsci.2021.100807 ↗
19. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
20. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
21. Plastic deformation of single crystals of the equiatomic Cr-Mn-Fe-Co-Ni high-entropy alloy in tension and compression from 10K to 1273K10.1016/j.actamat.2020.10.073 ↗
22. The deformation behavior and strain rate sensitivity of ultra-fine grained CoNiFeCrMn high-entropy alloys at temperatures ranging from 77 to 573K10.1016/j.jallcom.2019.03.373 ↗
23. High-entropy alloys: a review of mechanical properties and deformation mechanisms at cryogenic temperatures10.1007/s10853-022-07066-2 ↗
24. Effect of second phase particles on mechanical properties and grain growth in a CoCrFeMnNi high entropy alloy10.1016/j.msea.2019.01.112 ↗
25. Multi-heterostructure and mechanical properties of N-doped FeMnCoCr high entropy alloy10.1016/j.ijplas.2021.102965 ↗
26. Synergy effect of multi-strengthening mechanisms in FeMnCoCrN HEA at cryogenic temperature10.1016/j.jmst.2020.12.079 ↗
27. Gavriljuk · 1999
28. Berns · 2013
29. Effect of nitrogen on corrosion behaviour of a novel high nitrogen medium-entropy alloy CrCoNiN manufactured by pressurized metallurgy10.1016/j.jmst.2018.03.021 ↗
30. CrMnFeCoNi high entropy alloys with carbon and nitrogen: mechanical properties, wear and corrosion resistance10.1007/s42452-021-04814-y ↗
31. Effect of nitrogen on mechanical properties of CoCrFeMnNi high entropy alloy at room and cryogenic temperatures10.1016/j.jallcom.2020.156633 ↗
32. Strengthening and deformation mechanism of a Fe20Co20Cr20Mn20Ni20 high entropy alloy with high nitrogen content
33. Yield strength increase of a CoCrNi medium entropy alloy by interstitial nitrogen doping at maintained ductility10.1016/j.scriptamat.2019.12.007 ↗
34. Effect of N addition on microstructure and mechanical properties of CoCrFeNiMn high entropy alloy produced by mechanical alloying and vacuum hot pressing sintering10.1016/j.intermet.2017.09.013 ↗
35. Effect of nitrogen alloying and friction stir processing on the microstructures and mechanical properties of CoCrFeMnNi high-entropy alloys10.1016/j.jallcom.2019.153512 ↗
36. Influence of nitrogen alloying on microstructural evolution and tensile properties of CoCrFeMnNi high-entropy alloy treated by cold-rolling and subsequent annealing10.1016/j.msea.2020.139472 ↗
37. The effect of nitrogen alloying on hydrogen-assisted plastic deformation and fracture in FeMnNiCoCr high-entropy alloys10.1016/j.scriptamat.2020.113642 ↗
38. Interstitial in f.c.c. high entropy alloys10.3390/met10050695 ↗
39. Strengthening and deformation mechanism of interstitially N and C doped FeCrCoNi high entropy alloy10.1016/j.jallcom.2022.164118 ↗
40. Hirsch · 1966
41. X-ray diffraction characterization of low temperature plasma nitrided austenitic stainless steels10.1023/A:1004647423860 ↗
42. Solving the strength-ductility tradeoff in the medium-entropy NiCoCr alloy via interstitial strengthening of carbon10.1016/j.intermet.2018.12.009 ↗
43. On the difference in carbon- and nitrogen-alloying of an equiatomic FeMnCrNiCo high-entropy alloy10.1016/j.matlet.2020.128183 ↗
44. Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high/medium entropy alloys10.1016/j.actamat.2019.04.017 ↗
45. Thermal activation mechanisms and Labush-type strengthening analysis for a family of high-entropy and equiatomic solid-solution alloys10.1016/j.actamat.2016.08.047 ↗
46. Polycrystalline elastic moduli of a high-entropy alloy at cryogenic temperatures10.1016/j.intermet.2014.11.005 ↗
47. Stress equivalence of solution hardening10.1016/0036-9748(72)90052-X ↗
48. Thermal activation parameters of plastic flow reveal deformation mechanisms in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2017.10.014 ↗
49. On the strain-rate dependent deformation mechanism of CoCrFeMnNi high-entropy alloy at liquid nitrogen temperature10.1080/21663831.2017.1323807 ↗
50. Models of short-range order in a face-centered cubic Fe-Ni-Cr alloy with a high concentration of nitrogen10.1016/0956-7151(95)00107-7 ↗
51. Friction stresses in the γ phase of a nickel-based superalloy10.1080/01418619808224077 ↗
52. Mechanisms of slip mode modification in F.C.C. solid solutions10.1016/0956-7151(90)90126-2 ↗
53. Quantitative size-factor for metallic sold solutions10.1007/BF00549722 ↗
54. Deformation twinning in high-nitrogen austenitic stainless steel10.1016/j.actamat.2007.02.023 ↗
55. Twinning-induced plasticity steels10.1016/j.actamat.2017.06.046 ↗
56. Combined deformation twinning and short-range ordering causes serrated flow in high-manganese steel10.1016/j.msea.2019.01.042 ↗
57. Advancing towards constitutive equations for the metal industry via the LEDs theory10.1007/s11661-004-0351-x ↗
58. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
59. Strain hardening behavior of aluminum alloyed Hadfield steel single crystals10.1016/j.actamat.2004.12.033 ↗
60. Mechanism of low temperature brittle fracture in high nitrogen bearing austenitic steels10.1016/S1359-6454(97)00350-9 ↗
61. The effect of aluminum alloying on ductile-to-brittle transition in Hadfield steel single crystal10.1007/s10704-009-9414-8 ↗
62. High-strength single crystals of austenitic stainless steels with nitrogen content: mechanisms of deformation and fracture