journal article·2022-11

Ti-doped Fe2O3/carbon cloth anode with oxygen vacancies and partial rGO encapsulation for flexible lithium ion batteries

Yifan Lin, Li Sun, Jingjing Hu, Hankun Tan, Feng Xie, Yaru Qu, Ke Wang, Yihe Zhang

Publisher page

Abstract

In this study, Fe 2O 3 with oxygen vacancies (OVs) introduced by Ti doping is partially wrapped by reduced graphene oxide (rGO), and then grown directly on carbon cloth (CC) to obtain a self-supported electrode with hierarchical structures (Ti-Fe 2O 3@rGO/CC). Compared with Fe 2O 3 nanosheets, Ti-doped Fe 2O 3 nanosheets show better lithium storage performance because the existence of OVs can not only promote faster charge transfer kinetics but also help to maintain the integrity of electrode structure and improve the electrochemical activity. Especially, the rGO sheets are partially wrapped on Ti-Fe 2O 3, inhibiting the agglomeration of components and shortening the diffusion distance of Li + , to obtain better cycle stability. Moreover, it can also provide a buffer to alleviate the volume expansion, avoid the excessive growth of SEI film, and ensure that OVs can maximize their advantages under deep discharge conditions. The Ti-Fe 2O 3@rGO/CC electrode delivers a high capacity of 1193 mAh g −1 (3.245 mAh cm −2) at 200 mA g −1 , showing great potential as an anode material for lithium-ion batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Silicene: a promising anode for lithium-ion batteries
2. Heterogeneous structured Mn2O3/Fe2O3 composite as anode material for high performance lithium ion batteries
3. Layered heterostructure ionogel electrolytes for high‐performance solid‐state lithium‐ion batteries
4. Dispersed distribution derived integrated anode for lithium ion battery
5. Conversion reaction-based oxide nanomaterials for lithium ion battery anodes
6. Atomic layer-by-layer Co3O4/graphene composite for high performance lithium-ion batteries
7. Lithium-ion batteries: epitaxial growth of branched-Fe2O3/SnO2 nano-heterostructures with improved lithium-ion battery performance10.1002/adfm.201100088 ↗
8. Constructing multifunctional heterostructure of Fe2O3@Ni3Se4 nanotubes10.1002/smll.201704065 ↗
9. Al-doped Fe2O3 nanoparticles: advanced anode materials for high capacity lithium ion batteries10.1039/D0DT04423G ↗
10. Advanced Ti-doped Fe2O3@PEDOT core/shell anode for high-energy asymmetric supercapacitors
11. Oxygen vacancies enhance pseudocapacitive charge storage properties of MoO3-x10.1038/nmat4810 ↗
12. Co-doped NiO nanoflake arrays toward superior anode materials for lithium ion batteries10.1016/j.jpowsour.2011.03.089 ↗
13. Zheng, Yang, Zhou, Tengfei, Zhao, Xudong, Pang, K.Wei, Hong, Sean, Atomic Interface Engineering and Electric-Field Effect in Ultrathin Bi2MoO6 Nanosheets for Superior Lithium Ion Storage, 29.26 (2017): 1700396.10.1002/adma.201700396 ↗
14. Al-doped Fe2O3 nanoparticles: advanced anode materials for high capacity lithium ion batteries10.1039/D0DT04423G ↗
15. B. Bharti, S. Kumar, H.-N. Lee, R. Kumar, Formation of oxygen vacancies and Ti3+ state in TiO2 thin film and enhanced optical properties by air plasma treatment, Scientific reports, 6 (2016) 1–12.10.1038/srep32355 ↗
16. The formation and detection techniques of oxygen vacancies in titanium oxide-based nanostructures10.1039/C8NR09666J ↗
17. Synergistic effects of dopant (Ti or Sn) and oxygen vacancy on the electronic properties of hematite: A DFT investigation10.1039/D0RA01450H ↗
18. Enhancement of sodium ion battery performance enabled by oxygen vacancies10.1002/ange.201503477 ↗
19. Hydrothermal synthesis of graphene-TiO2 nanotube composites with enhanced photocatalytic activity10.1021/cs200621c ↗
20. Closely packed Si@C and Sn@C nano-particles anchored by reduced graphene oxide sheet boosting anode performance of lithium ion batteries - ScienceDirect10.1016/j.jmst.2020.12.075 ↗
21. The regulating role of carbon nanotubes and graphene in lithium-ion and lithium–sulfur batteries
22. Phase transition of hollow-porous α- Fe2O3 microspheres based anodes for lithium ion batteries during high rate cycling10.1039/C6TA07131G ↗
23. Preparation and electrochemical characterization of ultrathin WO3−x /C nanosheets as anode materials in lithium ion batteries10.1007/s12274-016-1373-6 ↗
24. Raman spectra of graphite oxide and functionalized graphene sheets10.1021/nl071822y ↗
25. Fabrication of chemiresistive gas sensors based on multistep reduced graphene oxide for low parts per million monitoring of sulfur dioxide at room temperature10.1016/j.snb.2016.11.018 ↗
26. Effect of a CdSe layer on the thermo-and photochromic properties of MoO3 thin films deposited by physical vapor deposition10.1021/acs.jpcc.9b02895 ↗
27. Robust erythrocyte-like Fe2O3@ carbon with yolk-shell structures as high-performance anode for lithium ion batteries10.1016/j.cej.2018.04.119 ↗
28. Generalized self-assembly of scalable two-dimensional transition metal oxide nanosheets
29. Phase transition of hollow-porous alpha-Fe2O3 microsphere based anodes for lithium ion batteries during high rate cycling
30. α-Fe2O3 nanoparticles decorated C@MoS2 nanosheet arrays with expanded spacing of (002) plane for ultrafast and high Li/Na-ion storage
31. Tailored plum pudding‐like Co2P/Sn encapsulated with carbon nanobox shell as superior anode materials for high‐performance sodium‐ion capacitors10.1002/aenm.201900091 ↗
32. Lithium transport processes in electrodes on the basis of Li3V2(PO4)3 by constant current chronopotentiometry, cyclic voltammetry and pulse chronoamperometry10.1016/j.electacta.2013.12.131 ↗
33. Pseudocapacitance-tuned high-rate and long-term cyclability of NiCo2S4 hexagonal nanosheets prepared by vapor transformation for lithium storage10.1039/C7TA01758H ↗
34. Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance10.1038/ncomms12122 ↗
35. Turning indium oxide into high-performing electrode materials via cation substitution strategy: Preserving single crystalline cubic structure of 2D nanoflakes towards energy storage devices - ScienceDirect
36. A new CoO/Co2B/rGO nanocomposite anode with large capacitive contribution for high-efficiency and durable lithium storage - ScienceDirect10.1016/j.apsusc.2019.144698 ↗
37. 3D self-supporting heterostructure NiCo-LDH/ZnO/CC electrode for flexible high-performance supercapacitor