Pseudocapacitive enhancement for layered PI@MXene porous organic cathode in advanced lithium-ion batteries
Source abstract
Abstract
Polyimide (PI) organic cathode has recently gained popularity, but the insufficient utilization of the redox-active sites restricts its applications due to the poor ionic and electronic transporting performances. A new layered porous organic cathode was designed/fabricated by using few-layered MXene as the matrix, and porous polyimide (PI) as the coating to activate the active carbonyl groups (PI@MXene). The bonding structures of the as-synthesized samples were tested by FT-IR spectroscopy. The existence of few-layered MXene in the sample was confirmed by XRD and XPS analysis. By adjusting the ratio of MXene, PI@MXene with 5 wt% MXene (PI@5%MXene) shows the surface morphology of thin layered porous structure. Due to the existence of few-layered MXene, PI@ 5%MXene porous cathode can provide multiple channels for fast electronic and ionic transporting inside the composite, resulting in the enhanced pseudocapacitive effect. Therefore, the PI@ 5%MXene cell deserves excellent electrochemical performances. This work may provide a promising strategy for the development of high-performance polyimide hybrid electrodes.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Recent achievements on inorganic electrode materials for lithium-ion batteries10.1021/ja507828x ↗
2. Cycle-life model for graphite-LiFePO4 cells10.1016/j.jpowsour.2010.11.134 ↗
3. Reversible anionic redox activities in conventional LiNi1/3Co1/3Mn1/3O2 cathodes10.1002/anie.202001349 ↗
4. Improving battery safety by early detection of internal shorting with a bifunctional separator, Nature
5. Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review, Energy Storage
6. Prospects of organic electrode materials for practical lithium batteries10.1038/s41570-020-0160-9 ↗
7. Organic electrode materials for rechargeable lithium batteries10.1002/aenm.201100795 ↗
8. Organic electrode materials for metal ion batteries10.1021/acsami.9b20384 ↗
9. Advanced organic electrode materials for rechargeable sodium‐ion batteries10.1002/aenm.201601792 ↗
10. Self-conversion templated fabrication of sulfur encapsulated inside the N-doped hollow carbon sphere and 3D graphene frameworks for high-performance lithium–sulfur batteries10.1016/j.electacta.2018.11.013 ↗
11. Magnesium ion based organic secondary batteries10.1039/C8TA05230A ↗
12. Highly stable magnesium-ion-based dual-ion batteries based on insoluble small-molecule organic anode material10.1016/j.ensm.2020.04.025 ↗
13. Towards sustainable and versatile energy storage devices: an overview of organic electrode materials10.1039/c3ee40709h ↗
14. Recent progress in carbonyl-based organic polymers as promising electrode materials for lithium-ion batteries (LIBs)10.1039/D0TA03321A ↗
15. A quinone-based electrode for high-performance rechargeable aluminum-ion batteries with a low-cost AlCl3/urea ionic liquid electrolyte10.1021/acsami.0c04640 ↗
16. Toward organic carbonyl-contained small molecules in rechargeable
17. Sulfur/polythiophene with a core/shell structure: synthesis and electrochemical properties of the cathode for rechargeable lithium batteries, The10.1021/jp1114724 ↗
18. Superlithiation of non-conductive polyimide toward high-performance lithium-ion batteries10.1039/C8TA05109G ↗
19. Polyimide containing tricarbonyl moiety as an active cathode for rechargeable Li-ion batteries10.1149/2.0391811jes ↗
20. Carboxylated polyimide separator with excellent lithium ion transport properties for a high-power density lithium-ion battery10.1039/C7TA08702K ↗
21. A high-temperature stable ceramic-coated separator prepared with polyimide binder/Al2O3 particles for lithium-ion batteries10.1016/j.memsci.2016.06.035 ↗
22. Design, fabrication and application of PEO/CMC-Li@ PI hybrid polymer electrolyte membrane in all-solid-state lithium battery10.1016/j.electacta.2021.138747 ↗
23. Chain structure-dependent electrochemical performance of polyimide cathode materials for lithium-ion batteries10.1007/s10853-020-05510-9 ↗
24. m-Phenylenediamine as a building block for polyimide battery cathode materials10.1021/acsaem.1c00092 ↗
25. Dual‐active‐center of polyimide and triazine modified atomic‐layer covalent organic frameworks for high‐performance Li storage
26. A perylene-based aromatic polyimide with multiple carbonyls enabling high-capacity and stable organic lithium and sodium ion batteries10.1039/D0SE01246G ↗
27. In situ growth of polyimide nanoarrays on conductive carbon supports for high-rate charge storage and long-lived metal-free cathodes10.1039/D1TA00302J ↗
28. Anti-oxidized electrostatic self-assembly of 3D high-density Polyimide@ MXene composite for superior aqueous Mg2+ storage10.1016/j.compositesb.2021.109073 ↗
29. 3D CoS2/rGO aerogel as trapping-catalyst sulfur host to promote polysulfide conversion for stable Li-S batteries10.1016/j.jallcom.2021.159780 ↗
30. Large‐area polyimide/SWCNT nanocable cathode for flexible lithium‐ion batteries10.1002/adma.201502241 ↗
31. Reduced graphene oxide promoted assembly of graphene@polyimide film as a flexible cathode for high-performance lithium-ion battery10.1039/D0RA00884B ↗
32. Direct deposition of two-dimensional MXene nanosheets on commercially available filter for fast and efficient dye removal10.1016/j.jhazmat.2019.121367 ↗
33. Insights into the Li+ storage mechanism of TiC@ C-TiO2 core-shell nanostructures as high performance anodes10.1016/j.nanoen.2018.05.022 ↗
34. NiCo-LDH/Ti3C2 MXene hybrid materials for lithium ion battery with high-rate capability and long cycle life10.1016/j.jechem.2020.03.018 ↗
35. Hierarchically porous MXene decorated carbon coated LiFePO4 as cathode material for high-performance lithium-ion batteries10.1016/j.jallcom.2021.160210 ↗
36. Study of structure morphology and layer thickness of Ti3C2 MXene with Small-Angle Neutron Scattering (SANS)
37. NiMn layered double hydroxide nanosheets in-situ anchored on Ti3C2 MXene via chemical bonds for superior supercapacitors, ACS Applied Energy
38. NiMn-layered double hydroxides chemically anchored on Ti3C2 MXene for superior lithium ion storage, ACS Applied Energy
39. Few-layered Ti3C2 MXene anchoring bimetallic selenide NiCo2Se4 nanoparticles for superior sodium-ion batteries10.1016/j.cej.2021.129161 ↗
40. Rational design and synthesis of SiC/TiC@ SiOx/TiO2 porous core–shell nanostructure with excellent Li-ion storage performance10.1039/C8CC07673A ↗
41. A self-sacrifice template strategy to synthesize Co-LDH/MXene for lithium-ion batteries10.1039/D1CC04492C ↗
42. Synthesis of nickel hydroxide/delaminated-Ti3C2 MXene nanosheets as promising anode material for high performance lithium ion battery10.1016/j.jallcom.2020.155812 ↗
43. Benzoquinone-based polyimide derivatives as high-capacity and stable organic cathodes for lithium-ion batteries10.1021/acsami.9b18422 ↗
44. Structural engineering of covalent organic frameworks for rechargeable batteries10.1002/aenm.202003054 ↗
45. A multifunctional MXene additive for enhancing the mechanical and electrochemical performances of the LiNi0.8Co0.1Mn0.1O2 cathode in lithium-ion batteries10.1039/C9TA12683J ↗
46. Assembly of MXene/PP separator and its enhancement for Ni-Rich LiNi0. 8Co0. 1Mn0. 1O2 electrochemical performance10.3390/polym12102192 ↗
47. Ti3C2 MXene-encapsulated NiFe-LDH hybrid anode for high-performance lithium-ion batteries and capacitors10.1021/acsaem.1c01171 ↗
48. FT-IR and XPS studies of polyurethane-urea-imide coatings10.1016/j.porgcoat.2005.11.007 ↗
49. Chemical evaluation of Cu–polyimide interfaces10.1116/1.579218 ↗
50. An advanced configuration TiO2/LiFePO4 polymer lithium ion battery10.1016/j.jpowsour.2012.05.071 ↗
51. Fast and universal solution-phase flocculation strategy for scalable synthesis of various few-layered MXene powders10.1021/acs.jpclett.9b03682 ↗
52. Application of galvanostatic intermittent titration technique to investigate phase transformation of LiFePO4 nanoparticles10.1016/j.electacta.2017.04.137 ↗
53. Kinetic analysis on LiFePO4 thin films by CV, GITT, and EIS10.1016/j.electacta.2011.02.119 ↗
54. Cross-nanoflower CoS2 in-situ self-assembled on rGO sheet as advanced anode for lithium/sodium ion battery10.1016/j.electacta.2019.134992 ↗
55. An effective etching-induced coating strategy to shield LiNi0.8Co0.1Mn0.1O2 electrode materials by LiAlO210.1016/j.jpowsour.2018.11.062 ↗
56. Oriented SnS nanoflakes bound on S-doped N-rich carbon nanosheets with a rapid pseudocapacitive response as high-rate anodes for sodium-ion batteries10.1039/C7TA06577A ↗
57. Flexible conductive anodes based on 3D hierarchical Sn/NS-CNFs@ rGO network for sodium-ion batteries10.1007/s40820-019-0294-9 ↗
58. Pseudocapacitive behavior of the Fe2O3 anode and its contribution to high reversible capacity in lithium ion batteries10.1039/C8NR04871A ↗
59. Phase transition induced synthesis of one dimensional In1−xZnxOy heterogeneous nanofibers for superior lithium ion storage10.1016/j.apsusc.2018.11.154 ↗
60. Ultrathin Sb2S3 nanosheet anodes for exceptional pseudocapacitive contribution to multi-battery charge storage10.1016/j.ensm.2018.11.005 ↗
61. 2D MXene–TiO2 core–shell nanosheets as a data‐storage medium in memory devices10.1002/adma.201907633 ↗
62. Enhanced electrochemical performance of LiFePO4 cathode with carbon-TiO2 hybrid coating10.1007/s10853-016-0229-5 ↗