Evolution of lamellar architecture and microstructure during redox cycling of Fe-Co and Fe-Cu foams
Source abstract
Abstract
The effects of alloying Fe with 25 at% Co or 30 at% Cu are studied in freeze-cast lamellar foams subjected to redox cycling under H 2- and H 2 O-rich atmospheres at 800 ºC, relevant to metal-air batteries. In unalloyed Fe foams, redox cycling causes irreversible Kirkendall porosity growth within lamellae, leading to fracture and buckling in the lamellar architecture which in turn leads to foam densification after a few cycles. By contrast, Fe-25Co lamellae develop, upon oxidation, a pure Co core and a Fe 3O 4 shell which decreases buckling and Kirkendall pore growth, thus slowing sintering and densification of the lamellar foams. After Fe 3O 4 reduction, the Fe-rich shells and Co-rich cores of the lamellae re-homogenize by diffusion to the original single-phase Fe-25Co alloy, achieving a reversible microstructure upon a full redox cycle. After 10 cycles, average channel porosity (between lamellae) undergoes only a small decrease (from 62 % to 46 %), with minimal Kirkendall pore coarsening in the lamellae, consistent with strong sintering resistance in the Fe-25Co foams. The Fe-30Cu foams also display lamellae with Cu core and a Fe 3O 4 shell structure after oxidation, since Cu, like Co, does not oxidize under steam. However, the lack of solubility of Cu in Fe prevents re-homogenization after Fe 3O 4 reduction, so the resulting Cu-core / Fe-shell lamellae undergo severe sintering and densification upon subsequent redox cycling, with channel porosity reducing from 61 % to 9 % after just 5 cycles. For both systems, operando x-ray diffraction during redox cycling reveals that Cu, unlike Co, doubles the Fe oxidation rate, as compared to pure Fe foams.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · High-Temperature Coating Behaviors · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Recent progress of metal–air batteries—a mini review10.3390/app9142787 ↗
2. Metal air battery: a sustainable and low cost material for energy storage10.1088/1742-6596/1913/1/012065 ↗
3. Recent progress in rechargeable alkali metal-air batteries10.1016/j.gee.2016.04.004 ↗
4. Materials design for rechargeable metal-air batteries10.1016/j.matt.2019.05.008 ↗
5. A review of the iron-air secondary battery for energy storage10.1002/cplu.201402238 ↗
6. Iron-based flow batteries to store renewable energies10.1007/s10311-018-0709-8 ↗
7. A comprehensive review on the development of solid-state metal-air batteries operated on oxide-ion chemistry
8. A novel solid oxide redox flow battery for grid energy storage10.1039/c1ee02489b ↗
9. Cyclic durability of a solid oxide Fe-air redox battery operated at 650C10.1149/2.048310jes ↗
10. Performance of solid oxide iron-air battery operated at 550C10.1149/2.085308jes ↗
11. Enhanced reversibility and durability of a solid oxide Fe–air redox battery by carbothermic reaction derived energy storage materials10.1039/C3CC47673A ↗
12. Simulation of solid oxide iron-air battery: effects of heat and mass transfer on charge/discharge characteristics10.1016/j.jpowsour.2015.03.149 ↗
13. Energy efficiency of an intermediate-temperature solid oxide iron–air redox battery10.1016/j.est.2015.07.001 ↗
14. High performance solid-state iron-air rechargeable ceramic battery operating at intermediate temperatures (500-650 degrees C)10.1016/j.apenergy.2018.10.022 ↗
15. A novel high temperature metal - air battery10.1149/05045.0125ecst ↗
16. Pore morphology evolution and atom distribution of doped Fe2O3 foams developed by freeze-casting after redox cycling10.1016/j.jmrt.2021.06.008 ↗
17. High-stability, high-capacity oxygen carriers: iron oxide-perovskite composite materials for hydrogen production by chemical looping10.1016/j.apenergy.2015.05.062 ↗
18. Development of storage materials for high-temperature rechargeable oxide batteries10.1016/j.est.2014.12.001 ↗
19. Long term operation of rechargeable high temperature solid oxide batteries10.1149/2.0741409jes ↗
20. Chemical storage of hydrogen by modified iron oxides10.1016/S0378-7753(03)00398-7 ↗
21. Iron foams created by directional freeze casting of iron oxide, reduction and sintering10.1016/j.matlet.2016.12.104 ↗
22. In operando tomography reveals degradation mechanisms in lamellar iron foams during redox cycling at 800° C10.1016/j.jpowsour.2019.227463 ↗
23. Structure–processing relationships of freeze-cast iron foams fabricated with various solidification rates and post-casting heat treatment10.1557/jmr.2020.175 ↗
24. Freeze casting – a review of processing, microstructure and properties via the open data repository, FreezeCasting.net10.1016/j.pmatsci.2018.01.001 ↗
25. Architectural control of freeze‐cast ceramics through additives and templating10.1111/j.1551-2916.2009.03087.x ↗
26. Fe–Ni foams self-heal during redox cycling via reversible formation/homogenization of a ductile Ni scaffold10.1039/D0TA06813F ↗
27. Structural evolution of directionally freeze-cast iron foams during oxidation/reduction cycles10.1016/j.actamat.2018.09.054 ↗
28. Stabilizing iron oxide used in cycles of reduction and oxidation for hydrogen production10.1021/ef100199f ↗
29. Zhang · Thermodyn. Anal. Iron Oxides Redox React., PRICM · 2013 · 777
30. Directional solidification with constant ice front velocity in the ice-templating process10.1002/adem.201500235 ↗
31. Zhang, W., et al. Thermodynamic analyses of iron oxides redox reactions, in: Proceedings of the Eighth Pacific Rim International Congress on Advanced Materials and Processing, Springer, 2013.10.1002/9781118792148.ch96 ↗
32. Computing local thickness of 3D structures with ImageJ10.1017/S1431927607074430 ↗
33. Evolution of directionally freeze-cast Fe2O3 and Fe2O3+NiO green bodies during reduction and sintering to create lamellar Fe and Fe-20Ni foams
34. Microstructure evolution during reduction and sintering of 3D-extrusion-printed Bi2O3+TeO2 inks to form Bi2Te310.1016/j.actamat.2021.117422 ↗
35. True colors of oceanography: guidelines for effective and accurate colormap selection10.5670/oceanog.2016.66 ↗
36. Analytical methods10.1111/j.1471-0307.1961.tb00962.x ↗
37. Newville, M., et al., LMFIT: non-linear least-square minimization and curve-fitting for Python, Astrophysics Source Code Library, 2016,. ascl: 1606.014.
38. Hoyt, J.J., Phase transformations, 2011: McMaster University Bookstore.
39. Mack, J.B., S.M. Pennell, D.C. Dunand, Microstructural Evolution of Fe-25Ni Lamellar Foams during Redox Cycling, 2021.10.2139/ssrn.4090164 ↗
40. Thermodynamic assessment of the Cu-Fe-O system10.1007/s11669-011-9951-5 ↗
41. Role of surface oxophilicity in copper-catalyzed water dissociation10.1021/acscatal.8b01710 ↗
42. Kinetics of mixed copper–iron based oxygen carriers for hydrogen production by chemical looping water splitting10.1016/j.ijhydene.2012.04.052 ↗
43. Highly porous non-precious bimetallic electrocatalysts for efficient hydrogen evolution10.1038/ncomms7567 ↗
44. Iron-based chemical-looping technology for decarbonising iron and steel production10.1016/j.ijggc.2019.06.017 ↗
45. Jones, N., A Study of the Oxidation of FeCo Alloys and their Resulting Magnetic Properties, 2011.
46. Metal/metal‐oxide interfaces: a surface science approach to the study of adhesion10.1116/1.577656 ↗
47. Brandes, E.A. , G. Brook, Smithells Metals Reference Book, 2013, Elsevier.