journal article·2022-10

In situ study of phase transformations in electron beam additive manufactured Ti-6Al-4 V titanium alloy by high temperature synchrotron X-ray diffraction and TEM

O.B. Perevalova, M.S. Syrtanov

Publisher page

Abstract

The microstructure and phase composition of the EBAM Ti-6Al-4 V alloy samples were studied by the methods of in situ high temperature synchrotron X-ray diffraction and transmission electron microscopy (TEM) during heating from room temperature to a temperature of 1373 K. In the initial state, the main phase of the EBAM Ti-6Al-4 V alloy the samples was the α phase, the second phases were β + α″. The volume fraction of the β phase does not exceed 5%, α″ - 3%. It was found that the new α″ phase was formed at the temperature of 1073 K due to the phase transition α→α″. The α″ phase volume fraction increased as the heating temperature increased to the temperature of 1223 K and then decreased with a further increase of the temperature due to the α″→β phase transition. The dependences of the lattice parameters of the α, β and α″ phases on the heating temperature were revealed. It was established that the crystal lattice of the α phase was distorted during heating. The α phase passed into the unstable state. An increase of the c/a parameters ratio was accompanied by the formation of the α″ and β phases.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Additive manufacturing of Ti6Al4V alloy: a review10.1016/j.matdes.2018.107552 ↗
2. Tailoring microstructure and mechanical properties of additively manufactured Ti6Al4V using past processing10.3390/ma14030658 ↗
3. In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing condition combining laser melting and high-speed micro-X-ray diffraction
4. In situ synchrotron radiation study of TiH2-6Al-4V and Ti-6Al-4V: accelerated alloing and phase transformation, and formation of an oxygen-enriched Ti4Fe2O phase in TiH2-6Al-4V10.1007/s11661-014-2631-4 ↗
5. Sha · 2009
6. Effects of working, heat treatment, and aging on microstructural evolution and crystallographic texture of α, α′, α″ and β phases in Ti-6Al-4V wire10.1016/j.msea.2004.09.072 ↗
7. Phase transformation of α″ martensite structure by aging in Ti-8 mass.% Mo alloy10.2320/matertrans.45.1629 ↗
8. Phase transformation of quenched α″ martensite by aging in Ti-Nb alloys10.1016/j.msea.2006.02.180 ↗
9. Decomposition of deformed α′(α″) martensitic phase in Ti-6Al-4V alloy10.1080/02670836.2018.1466418 ↗
10. Kinetics of martensite decomposition in Ti-6Al-4V-[H alloys10.1016/S0921-5093(03)00350-2 ↗
11. Formation and reversion of stress induced martensite in Ti-10V–2Fe-3Al10.1016/0001-6160(82)90137-7 ↗
12. Phase stability and stress-induced transformations in beta titanium alloys10.1007/s11837-015-1411-y ↗
13. Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate10.1016/j.actamat.2018.04.035 ↗
14. Formation of deformation induced products in a metastable β titanium alloy during high temperature compression10.3390/met8020100 ↗
15. Enhancement of athermal α″ martensitic transformation in Ti-10V–2Fe-3Al alloy due to high-speed hot deformation10.1016/j.scriptamat.2012.03.011 ↗
16. Effect of oxygen on the hardness and alpha/beta phase ratio of Ti-6Al-4V alloy10.1016/0036-9748(86)90050-5 ↗
17. Martensitic transformations in Ti-6Al-4V (ELI) alloy manufactured by 3D printing10.1016/j.matchar.2018.09.042 ↗
18. In situ observations of lattice expansion and transformation rates of α and β phases in Ti-6Al-4V10.1016/j.msea.2004.08.084 ↗
19. In situ characterization of phase transformations kinetics in the Ti17 titanium alloy by electrical resistivity and high temperature synchrotron X-ray diffraction10.1016/j.msea.2007.04.072 ↗
20. Effect of substrate cooling on the microstructure and phase composition of Ti-6Al-4V titanium-based alloy products obtained using additive technologies10.1134/S1063784220030196 ↗
21. Effects of water cooling on the microstructure of electron beam additive-manufacted Ti-6Al-4V10.3390/met11111742 ↗
22. Scanning speed effect on mechanical properties of Ti-6Al-4V alloy processed by electron beam additive manufacturing10.1016/j.promfg.2015.09.026 ↗
23. Massive transformation in Ti-6Al-4V additively manufactured by selective electron beam melting10.1016/j.actamat.2015.11.011 ↗
24. Additivе manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
25. Nikiforov · 2009 · 382
26. Gorelik · 1970
27. Hirsch · 1977
28. Concenration dependent transformation plasticity effect during hydrogenation of technically pure titanium irradiated with an electron beam10.1007/s11182-019-01629-8 ↗
29. Features of hydrogenation of Ti-V alloys10.15407/mfint.37.02.0243 ↗
30. L.I.. Mirkin, Handbook on X-ray analysis of Polycrystals (Fizmatlit, Moscow, 1961).
31. Ming Yan, Yu Peng, An overview of densification, microstructure and mechanical property of additively manufactured Ti-6Al-4V – comparison among selective laser melting, electron beam melting, laser metal deposition and selective laser sintering, and with conventional powder, Chapter 5 in book: Sintering Techniques of Materials edited by A.Lakshmanan (2015) 77–106, https://doi.org//10.5772/59275.10.5772/59275 ↗
32. Martensitic transformation from β to α′ and α″ phases in Ti-V alloys: a first-principles study10.1557/jmr.2017.276 ↗
33. Change in the phase composition and lattice parameters of the solid solution based on α-Ti in the surface layers of the Ti-6Al-4V alloy subjected to electron-beam treatment10.1134/S0031918X20020143 ↗
34. The effect of nanoscal mesoscopic structural states accociated with lattice curvature on the mechanical behavior of Ti-6Al-4V alloy10.1134/S1029959920060016 ↗
35. Instability of the crystal lattice on the verge of structural phase transitions
36. Structural-phase transformations in Cu3Pt alloy during atomic ordering10.1007/s11182-013-9953-3 ↗
37. A.I.. Potekaev, A.A. Klopotov, E.V. Kozlov and V.V. Kulagina, Semi-Stable Pretransition Structures in Titanium Nickelide (NTL, Tomsk, 2004).