Creep-aging behaviors of Al-Cu-Li alloy with different grain sizes
Source abstract
Abstract
The Al-Cu-Li alloys with different grain sizes were manufactured through different routes and treated with T34 before the creep aging process. Their creep-aging behaviors at 160 °C under 175 MPa were investigated and their corresponding mechanical properties were tested. Their microstructure was characterized by EBSD and HAADF-STEM. The results show that the total creep strains increase with increasing grain size. The creep strain of specimens with an average grain size of 53.4 µm is twice as that with an average grain size of 12.2 µm. However, their yield and tensile strengths are grain size independent. This appearance could be explained by the large creep strain achieved before the secondary primary creep stage, which is contributed by dislocation motion and increases with increasing grain size. When strengthening precipitates start to nucleate and grow, the creep resistance of dislocations sharply increases and Harper-Dorn creep becomes the main creep mechanism. The alloys with different grain sizes have similar precipitates and substructures in their peak-creep-aged state, leading to their similar yield and tensile strengths at room temperature.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Review of precipitation in Al-Cu-Mg(-Li) alloys10.1179/174328005X14357 ↗
2. Li reactivity during the surface pretreatment of Al-Li alloy AA2050-T310.1016/j.electacta.2017.05.038 ↗
3. Aluminum-copper-lithium alloy 2050 developed for medium to thick plate10.1007/s11665-009-9554-z ↗
4. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
5. The evolution of al-li base products for aerospace and space applications10.1007/s11661-012-1155-z ↗
6. Progress in structural materials for aerospace systems10.1016/j.actamat.2003.08.023 ↗
7. Autoclave age forming large aluminum aircraft panels10.1016/0378-3804(89)90055-7 ↗
8. A review of the development of creep age forming: Experimentation, modelling and applications10.1016/j.ijmachtools.2010.08.007 ↗
9. Effect of external stress on the growth of precipitates in Al-Cu and Al-Cu-Mg-Ag alloys
10. Creep age forming: a short review of fundaments and applications
11. Airbus A380 takes creep age-forming to new heights. Mate
12. A case of reverse engineering for the manufacture of wide chord fan blades (WCFB) used in Rolls Royce aero engines10.1016/S0924-0136(02)01108-1 ↗
13. FE simulation of asymmetric creep-ageing behaviour of AA2050 and its application to creep age forming10.1016/j.ijmecsci.2018.03.003 ↗
14. The effects of pre-deformation on the creep aging behavior and mechanical properties of Al-Li-S4 alloys10.1016/j.msea.2017.07.068 ↗
15. Creep age forming of Al-Cu-Li alloy: application to thick sheet forming of double curvature aircraft panel10.1051/matecconf/20168006001 ↗
16. Experimental investigation of tension and compression creep-ageing behaviour of AA2050 with different initial tempers10.1016/j.msea.2016.01.074 ↗
17. Effects of process parameters on mechanical properties and microstructures of creep aged 2124 aluminum alloy10.1016/S1003-6326(14)63338-0 ↗
18. Effects of time and temperature on the creep forming of 7075 aluminum alloy: Springback and mechanical properties10.1016/j.msea.2011.08.025 ↗
19. The effects of temperature on the creep-aging behavior and mechanical properties of AA2050-T34 alloy10.1016/j.msea.2020.140010 ↗
20. The effect of grain size on the tensile and creep properties of Mg-2.6Nd-0.35Zn-xZr alloys at 250°C10.1016/j.msea.2012.09.052 ↗
21. Grain-scale creep processes in Mg-Al-Ca base alloys: implications for alloy design10.1016/j.scriptamat.2010.03.055 ↗
22. Creep deformation mechanism of Al-Mn alloy sheets with a wide range of grain size
23. Microstructure factor of creep behavior in near-αTi alloy10.4028/www.scientific.net/MSF.1016.1882 ↗
24. Harper-Dorn creep in Al, Pb, and Sn10.1007/BF02645593 ↗
25. On the evidence for diffusional creep processes. Creep and fracture of engineering
26. Effect of grain size and annealing treatment on steady-state creep of copper
27. Chapter 21-Mechanical properties of singlr-phase crystalline media: deformation at low temperatures
28. Grain size effects during creep of copper10.1016/S1359-6462(01)01247-7 ↗
29. The effects of pre-deformation on the creep aging behavior and mechanical properties of Al-Li-S4 alloys10.1016/j.msea.2017.07.068 ↗
30. Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction10.1016/j.scriptamat.2008.01.050 ↗
31. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
32. Evolution of dislocation density distributions in copper during tensile deformation10.1016/j.actamat.2013.08.027 ↗
33. Petch relation and grain boundary sources
34. Diffusion-controlled dislocation creep: a defense10.1016/0001-6160(79)90031-2 ↗
35. Microstructural mechanisms of creep
36. Mechanisms controlling creep of single phase metals and alloys10.1016/B978-1-4832-8412-5.50243-5 ↗
37. Analysis of creep data on aluminum at very low stresses10.1016/0025-5416(78)90209-4 ↗
38. Effect of Ag addition on the precipitation evolution and interfacial segregation for Al–Mg–Si alloy10.1016/j.actamat.2019.09.015 ↗
39. Superplastic deformation mechanisms in fine-grained 2050 Al-Cu-Li Alloys10.3390/ma13122705 ↗
40. Creep age forming modeling and characterization
41. A unified constitutive model for asymmetric tension and compression creep-ageing behaviour of naturally aged Al-Cu-Li alloy10.1016/j.ijplas.2016.11.007 ↗
42. Laws for work-hardening and low-temperature creep10.1115/1.3443340 ↗
43. Statistical theory of flow stress and work-hardening10.1080/14786436608212647 ↗
44. Microstructural evolution during aging of an Al-Cu-Li-Ag-Mg-Zr alloy10.1016/1359-6454(95)00319-3 ↗
45. The influence of Cu/Li ratio on precipitation in Al-Cu-Li-x alloys10.1016/j.actamat.2012.12.041 ↗
46. The effect of plastic deformation on Al2CuLi(T1) precipitation10.1007/BF02656799 ↗
47. Threshold stresses for dislocation climb over hard particles: The effect of an attractive interaction10.1016/0001-6160(86)90247-6 ↗
48. A new model-based creep equation for dispersion strengthened materials10.1016/0956-7151(90)90223-4 ↗
49. Atomic structure and growth mechanism of T1 precipitate in Al-Cu-Li-Mg-Ag alloy10.1016/j.scriptamat.2015.07.020 ↗
50. Transient dynamic recrystallization in an aluminium alloy subjected to large reductions in strain rate10.1016/S1359-6454(97)00140-7 ↗
51. A two-parameter description of heterogeneous dislocation distributions in deformed metal crystals10.1016/0025-5416(87)90463-0 ↗
52. Five-power-law creep in single phase metals and alloys10.1016/S0079-6425(99)00006-7 ↗
53. , Combinative hardening effects of precipitation in a commercial aged Al-Cu-Li-X alloy10.1016/j.msea.2013.09.016 ↗
54. The influence of substructure on the elevated and room temperature strength of a 26 Cr-1 Mo ferritic stainless steel10.1007/BF02643353 ↗
55. Strength and substructure of Al-4.7Mg-0.32Mn-0.21Sc-0.09Zr alloy sheets10.1134/S0031918X17020144 ↗