Re-examination of the effect of reducing annealing twin boundary density on the shape memory effect in Fe-Mn-Si-based alloys
Source abstract
Abstract
Reducing annealing twin boundary (ATB) density was proposed to substantially improve the shape memory effect (SME) of Fe–Mn–Si-based alloys, irrespective of their composition, deformation temperature and thermomechanical treatments. Here, we re-examined the effect of reducing ATB density on the SME of a Fe 20Mn 5.5Si 9Cr 5Ni (wt%) alloy. We set off with three starting states, i.e., the as-cast state, the hot forged and solution-treated (ST) state as well as the subsequently δ-annealed (DA) state. Our results reveal that the as-cast sample with the lowest ATB density exhibits the lowest shape recovery ratios, while the shape recovery ratios of the DA sample are close to those of the ST sample although the ATB density in the former is only ~1/3 of that in the latter. In other words, reducing ATB density does not necessarily lead to the improvement of SME. Compared to the ST sample, the lower ATB densities in the as-cast and DA samples are actually concomitant with higher densities of low angle grain boundaries (LAGBs), larger γ grain sizes and a limited amount of χ precipitates (volume fraction < 1.6%). The increase of LAGB density and the precipitation of elongated χ precipitates are deleterious to the SME, while the increase of γ grain size improves the SME. Thus, reducing ATB density cannot result in a monotonic change to the SME, given that the decrease of ATB density is concomitant with other microstructural changes.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Shape memory effect in γ ⇄ ε transformation in Fe-30Mn-1Si alloy single crystals10.1016/0001-6160(82)90011-6 ↗
2. Large recovery strain in Fe-Mn-Si-based shape memory steels obtained by engineering annealing twin boundaries10.1038/ncomms5964 ↗
3. Factors influencing shape memory behaviour in an Fe Mn Si alloy10.1016/0036-9748(89)90493-6 ↗
4. Effects of alloying additions on Fe-Mn-Si shape memory alloys10.2355/isijinternational.30.674 ↗
5. Mechanical and shape memory behaviour in an Fe-Mn-Si-Cr-Ni alloy10.1016/0921-5093(93)90497-3 ↗
6. Training effect in Fe-Mn-Si shape-memory alloys10.1007/BF00363341 ↗
7. Improvement of shape memory effect in an Fe-Mn-Si alloy by prestraining of austenite10.1016/0167-577X(94)90248-8 ↗
8. The mechanism of thermomechanical training of a newly developed Fe-Mn-Si-Cr-Cu shape memory alloy
9. Improvement of shape memory effect in an Fe-Mn-Si-Cr-Ni alloy10.1016/1359-6462(95)00605-2 ↗
10. Remarkable improvement of shape memory effect in Fe-Mn-Si based shape memory alloys by producing NbC precipitates10.1016/S1359-6462(01)00978-2 ↗
11. Characterization of Fe-Mn-Si-Cr shape memory alloys containing VN precipitates10.1016/j.msea.2003.10.359 ↗
12. Shape memory effect and crystallographic investigation in VN containing Fe-Mn-Si-Cr alloys10.2320/matertrans.45.930 ↗
13. Effect of NbC and TiC precipitation on shape memory in an iron-based alloy10.1007/s10853-006-0050-7 ↗
14. Effect of second-phase particles on shape memory in Fe-Mn-Si-based alloys10.1016/j.msea.2006.11.084 ↗
15. A novel Fe-Mn-Si shape memory alloy with improved shape recovery properties by VC precipitation10.1002/adem.200800312 ↗
16. Thermomechanical properties of an Fe-Mn-Si-Cr-Ni-VC shape memory alloy with low transformation temperature10.1002/adem.201100129 ↗
17. Characteristics of Fe-28Mn-6Si-5Cr shape memory alloy produced by centrifugal casting10.4028/www.scientific.net/MSF.327-328.243 ↗
18. Innovation in producing crane rail fishplate using Fe-Mn-Si-Cr based shape memory alloy10.1179/174328408X302585 ↗
19. Evaluation of Fe-based shape memory alloy (Fe-SMA) as strengthening material for reinforced concrete structures10.3390/app8050730 ↗
20. Iron-Based shape memory alloy for strengthening of 113-Year bridge10.1016/j.engstruct.2021.113231 ↗
21. Improvement in shape memory effect for Fe-Mn-Si alloys
22. Microstructure, shape memory behavior and mechanical properties of hot rolled Fe-17Mn-5Si-5Cr-4Ni-0.3C–1Ti shape memory alloy10.1016/j.engstruct.2021.112300 ↗
23. Characteristic features of shape memory effect and related transformation behavior in Fe-based alloys10.1016/S0921-5093(99)00290-7 ↗
24. Atomic force microscope study of stress-induced martensite formation and its reverse transformation in a thermomechanically treated Fe-Mn-Si-Cr-Ni alloy10.1016/S1359-6454(00)00187-7 ↗
25. Mechanism of improvement of shape memory effect by training in Fe-Mn-Si-based alloys10.4028/www.scientific.net/MSF.327-328.211 ↗
26. Atomic force microscopy study on microstructural changes by 'training' in Fe-Mn-Si-based shape memory alloys10.1080/1478643031000149090 ↗
27. On the origin of the improvement of shape memory effect by precipitating VC in Fe–Mn–Si-based shape memory alloys10.1016/j.actamat.2018.06.008 ↗
28. A novel training-free processed Fe-Mn-Si-Cr-Ni shape memory alloy undergoing δ → γ phase transformation10.1007/s11661-016-3521-8 ↗
29. Thermodynamic calculation of stacking fault energy of the Fe-Mn-Si-C high manganese steels10.1016/j.msea.2014.01.046 ↗
30. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
31. Lippold · 2005
32. Microstructural evolution during solidification of austenitic stainless steel weld metals: a color metallographic and electron microprobe analysis study10.1016/S1044-5803(97)80024-1 ↗
33. In situ phase transformation of laves phase from Chi-phase in Mo-containing Fe-Cr-Ni alloys10.1016/j.matlet.2015.06.018 ↗
34. Austenite stability in Fe-Mn-Si-based shape memory alloys10.1016/j.jallcom.2006.04.054 ↗
35. Improvement of shape memory effect in Fe-Mn-Si alloy by slight tantalum addition10.1016/j.msea.2009.04.036 ↗
36. The effect of microstructure on the shape recovery of a Fe-Mn-Si-Cr-Ni stainless steel shape memory alloy10.1016/S1359-6462(02)00348-2 ↗
37. Si content dependence on shape memory and tensile properties in Fe-Mn-Si-C alloys10.1016/j.msea.2010.12.065 ↗
38. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
39. Effect of pre-deformation at room temperature on shape memory properties of stainless type Fe-15Mn-5Si-9Cr-5Ni-(0.5-1.5)NbC alloys10.1016/j.actamat.2005.04.035 ↗
40. Characterization of the microstructures and the shape memory properties of the Fe-Mn-Si-Cr-Ni-C shape memory alloy after severe plastic deformation by differential speed rolling and subsequent annealing10.1016/j.matchar.2017.11.055 ↗
41. Effects of homogenization time on the both martensitic transformations and mechanical properties of Fe–Mn–Si–Cr–Ni shape memory alloy10.1016/j.jallcom.2006.06.091 ↗
42. A role of alpha ’ martensite introduced by thermo-mechanical treatment in improving shape memory effect of an Fe-Mn-Si-Cr-Ni alloy10.1002/adem.201000282 ↗
43. A novel training-free cast Fe-Mn-Si-Cr-Ni shape memory alloy based on formation of martensite in a domain-specific manner10.1002/adem.201000200 ↗
44. Microscopic observation of gamma-phase and epsilon-martensite and alpha'-martensite in Fe-Mn-Si-based shape memory alloys10.1016/1044-5803(94)00054-O ↗
45. Quantification of the amount of epsilon martensite in a Fe-Mn-Si-Cr-Ni shape memory alloy by means of electron backscatter diffraction10.1016/j.msea.2007.01.188 ↗
46. Effect of pre-straining on the shape recovery of Fe-Mn-Si-Cr-Ni shape memory alloys10.1007/s11661-014-2645-y ↗
47. On the improvement of shape-memory effect in Fe-16Mn-5Si-9Cr-4Ni alloys by thermomechanical treatment10.1016/0956-716X(94)90313-1 ↗
48. Relationship among grain size, annealing twins and shape memory effect in Fe-Mn-Si based shape memory alloys10.1088/0964-1726/25/7/075013 ↗
49. Key criterion for achieving giant recovery strains in polycrystalline Fe-Mn-Si based shape memory alloys10.1016/j.msea.2017.11.071 ↗
50. Dependence of shape memory effect on austenitic grain sizes in thermo-mechanical treated Fe-Mn-Si-Cr-Ni shape memory alloys10.1016/j.matchar.2020.110650 ↗
51. Theory and application of electron channelling contrast imaging under controlled diffraction conditions10.1016/j.actamat.2014.04.018 ↗
52. An investigation of grain-boundary phase in Fe-30Mn-6Si-5Cr shape memory alloy10.1016/S0925-8388(01)00905-7 ↗
53. Role of annealing in improving shape memory effect of as-cast Fe-Mn-Si-Cr-Ni shape memory alloys10.1007/s11661-019-05233-w ↗
54. Fe-Mn-Si-Cr-Ni based shape memory alloy:thermal and stress-induced martensite10.1016/j.msea.2020.140107 ↗
55. Improvement of shape memory effect via strengthening austenite by virtue of thermally activated process in FCC-type metastable multicomponent alloys10.1016/j.msea.2020.139748 ↗