The effect of Mn on particles morphology and property of 5 wt% TiB2/Al-4.5Cu-0.4Mn alloys
Source abstract
Abstract
In-situ 5 wt% TiB 2/Al-4.5Cu-0.4Mn composites were successfully prepared via the salt-metal reactions, which were assisted by improved mechanical stirring. The morphologies of the TiB 2 particles in the matrix of Al-4.5Cu-0.4Mn were investigated using field emission scanning electron microscopy (FESEM). The results indicated that TiB 2 particles were mainly present in the morphology of small plate-like hexagonal prisms, with size ranging from 0 to 1.4 µm and thicknesses of 0–0.8 µm. The growth mechanism of the TiB 2 and the influence of the Mn on that mechanism were also discussed based on fundamental crystal growth theories. It was found that the Mn affected the growth of the TiB 2 from the following two aspects: (1) The TiB 2 particles were relatively small overall, due to the fact that the Mn could inhibit the diffusion of Ti and B atoms; (2) The Mn was preferentially adsorbed on {0001}, {10 1 ̅ 0} and {10 1 ̅ 1}, which tended to effectively inhibit the growth of those faces. A lower-energy state of the TiB 2 particles with plate-like hexagonal prism morphology was retained in the Al-4.5Cu-0.4Mn alloy. Furthermore, the effects of the TiB 2 particles on the tensile strength and elongation of the Al-4.5Cu-0.4Mn alloy were examined.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. On the preparation and mechanical properties of in situ small-sized TiB2/Al-4.5Cu composites via ultrasound assisted RD method10.1016/j.jallcom.2018.06.303 ↗
2. Ultrasound assisted in-situ casting technique for synthesizing small-sized blocky Al3Ti particles reinforced A356 matrix composites with improved mechanical properties10.1016/j.jallcom.2018.02.010 ↗
3. Improvement of particles distribution of in-situ 5 vol% TiB2 particulates reinforced Al-4.5Cu alloy matrix composites with ultrasonic vibration treatment10.1016/j.jallcom.2016.09.013 ↗
4. Controlling the sizes of in-situ TiC nanoparticles for high-performance TiC/Al-Cu nanocomposites10.1016/j.ceramint.2021.07.017 ↗
5. Processing and mechanical properties of B4C reinforced Al matrix composites10.1016/j.jallcom.2009.04.065 ↗
6. A.R. Kennedy, A.E. Karantzalis, S.M. Wyatt, The microstructure and mechanical properties of TiC and TiB2-reinforced cast metal matrix composites, 34 ,1999, pp. 933–940.10.1023/A:1004519306186 ↗
7. Production and some properties of Si3N4 reinforced aluminium alloy composites10.1016/j.jascer.2015.07.002 ↗
8. Synthesis and characterization of AA7075/TiB2 aluminum matrix composite formed through stir casting method10.1016/j.matpr.2020.02.418 ↗
9. Preparation of in-situ 5 vol% TiB2 particulate reinforced Al-4.5Cu alloy matrix composites assisted by improved mechanical stirring process10.1016/j.matdes.2016.01.023 ↗
10. Effect of SiC particle size on the physical and mechanical properties of extruded Al matrix nanocomposites10.1016/j.matdes.2013.08.049 ↗
11. Synthesis of nanoscale spherical TiB2 particles in Al matrix by regulating Sc contents10.1557/jmr.2018.469 ↗
12. Controlled synthesis of different morphologies of TiB2 microcrystals by aluminum melt reaction method10.1016/j.materresbull.2013.02.026 ↗
13. Mechanical response of friction stir butt weld Al-4.5%Cu/TiB2/2.5p in situ composite: statistical modelling and optimization10.1016/j.jallcom.2020.154184 ↗
14. Influence of TiB2 particles on aging behavior of in-situ TiB2/Al-4.5Cu composites10.1016/j.msea.2018.02.099 ↗
15. Effect of Cu element on morphology of TiB2 particles in TiB2/Al-Cu composites10.1016/S1003-6326(20)65285-2 ↗
16. Effect of alloy elements on the morphology transformation of TiB2 particles in Al matrix10.1016/j.micron.2014.12.002 ↗
17. Scandium on the formation of in situ TiB2 particulates in an aluminum matrix10.1557/jmr.2018.208 ↗
18. Al-rich region of Al-Cu-Mn10.1016/j.jallcom.2016.07.075 ↗
19. Effects of ultrasonic vibration treatment on particles distribution of TiB2 particles reinforced aluminum composites10.1016/j.msea.2016.10.103 ↗
20. Preparation of in-situ 5 vol% TiB2 particulate reinforced Al-4.5Cu alloy matrix composites assisted by improved mechanical stirring process10.1016/j.matdes.2016.01.023 ↗
21. Anisotropic surface stability of TiB2: a theoretical explanation for the easy grain coarsening10.1557/jmr.2017.147 ↗
22. Density functional theory study of Al/NbB2 heterogeneous nucleation interface10.1016/j.apsusc.2018.06.076 ↗
23. Investigation on microstructure and mechanical properties of in-situ TiB2/Al-Cu-Mg composite profile fabricated by porthole die extrusion10.1016/j.msea.2020.139449 ↗
24. Microstructural stability of in-situ TiB2/Al composite during solution treatment10.1016/j.matchar.2016.11.032 ↗
25. Effect of varying TiB2 reinforcement and its ageing behaviour on tensile and hardness properties of in-situ Al-4.5%Cu-xTiB2 composite10.1016/j.jallcom.2019.04.137 ↗
26. Morphological evolution of TiC from octahedron to cube induced by elemental nickel10.1039/c1ce06205k ↗
27. Morphology stability of Al3BC phase in aluminum alloys10.1016/j.jallcom.2013.08.205 ↗
28. Effect of in-situ TiB2 particle addition on the mechanical properties of AA2219 Al alloy composite10.4236/jmmce.2011.106040 ↗
29. Application of Bravais-Friedel-Donnay-Harker, attachment energy and Ising models to predicting and understanding the morphology of molecular crystals10.1088/0022-3727/24/2/001 ↗
30. Fast shape evolution of TiN microcrystals in combustion synthesis10.1021/cg050333d ↗
31. Morphology and size control of octahedral and cubic primary Mg2Si in an Mg-Si system by regulating Sr contents10.1039/C3CE41646A ↗
32. First-principles study on the stability and work function of low-index surfaces of TiB210.1016/j.commatsci.2019.109356 ↗
33. A kinetic model for crystal growth from aqueous solution in the presence of impurity10.1016/0022-0248(95)00128-X ↗