Impact of precipitated phases on the microstructure and mechanical properties of eutectic Sn58Bi alloy
Source abstract
Abstract
A new type of low-melting-point heterogeneous alloy (LMH), based on Sn58Bi alloy (SBE), was prepared using Cu, Zn, Ag, and Sb microalloying and rapid solidification. The addition of Cu and Zn elements in equal mass ratios resulted in the Cu 5Zn 8 phase being dispersed in the Sn55Bi3Cu3Zn (LMH3) alloy. Subsequently, the additional Cu reacted with Sn to form a nano-sized η′-Cu 6Sn 5 phase at the interface of the Sn-Bi eutectic phase. Sn53Bi3Cu3Zn2Ag2Sb (LMH32) was prepared by adding appropriate amounts of Ag and Sb based on LMH3, leading to the precipitation of Ag 3 Sn and SbSn phases in the SBE matrix. The different precipitated phases in turn produced different types of fiber textures that existed in the matrix phase of SBE, LMH3, and LMH32. In addition, compared to LMH3, the presence of Ag 3 Sn and SbSn phases in LMH32 caused the formation of Bi twins identified via electron backscattered diffraction. The twin planes ( 10 1 ̅ 1 ) and ( 1 1 ̅ 02 ) had corresponding rotation axes and rotation angles of 93 . 8 ° [ 7 ̅ 431 ] and 90 . 2 ° [ 5 ̅ 41 5 ̅ ] , respectively. Nanoindentation results indicated that LMH32 exhibited higher creep resistance than Sn55Bi3Cu3Zn (LMH3) and SBE. The precipitated phase significantly refines the grain size and eutectic lath structure of the matrix phase (Sn and Bi). During the deformation process, the fine lath structure and the interfacial η′-Cu 6Sn 5 nanophase can hinder the slippage of the eutectic interface. Moreover, the presence of the precipitated phase forms a large strain gradient in the alloy matrix, which produces a significant back-stress hardening effect and induces substantial dislocation nucleation. The formation of more dislocations made the creep mechanism of LMHs depend on dislocation climbing.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Use of hop (Humulus lupulus) agricultural by-products for the reduction of aqueous lead (II) environmental health hazards10.1016/S0304-3894(01)00363-6 ↗
2. The effect of undercooling on the microstructure and tensile properties of hypoeutectic Sn–6.5Zn–xCu Pb-free solders10.1016/j.matdes.2015.05.016 ↗
3. Complex eutectic growth and Bi precipitation in ternary Sn-Bi-Cu and Sn-Bi-Ag alloys10.1016/j.jallcom.2016.09.003 ↗
4. Microstructure and mechanical properties of Sn-In and Sn-Bi solders10.1007/BF03222376 ↗
5. Interface reaction and intermetallic compound growth behavior of Sn-Ag-Cu lead-free solder joints on different substrates in electronic packaging10.1007/s10853-018-2907-y ↗
6. Fluxless laser reflow bumping of Sn-Pb eutectic solder10.1016/S1359-6462(99)00431-5 ↗
7. Elastic modulus, hardness and creep performance of SnBi alloys using nanoindentation10.1016/j.msea.2012.07.120 ↗
8. Comparison of electroplated eutectic Bi/Sn and Pb/Sn solder bumps on various UBM systems10.1109/6104.980035 ↗
9. Interfacial reactions between molten Sn-Bi-X solders and Cu substrates for liquid solder interconnects10.1016/j.actamat.2006.02.030 ↗
10. Inhibition of intermetallic compounds growth at Sn–58Bi/Cu interface bearing CuZnAl memory particles (2–6 μm)10.1007/s10854-019-02784-x ↗
11. Reynolds · 1998
12. Deformation kinetics of nanocrystalline nickel10.1016/j.actamat.2007.06.036 ↗
13. Nanocrystalline electrodeposited Ni: Microstructure and tensile properties10.1016/S1359-6454(02)00198-2 ↗
14. Characterization of eutectic Sn-Bi solder joints10.1007/BF02655427 ↗
15. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
16. A micro-indentation study of superplasticity in Pb, Sn and Sn-38wt%Pb10.1016/0001-6160(88)90319-7 ↗
17. Creep and hardness of metals: a physical study
18. Impression creep behavior of lead-free Sn–5Sb solder alloy10.1016/j.msea.2006.10.092 ↗
19. Indentation power-law creep of high-purity indium10.1007/s11661-999-0051-7 ↗
20. Indentation of power law creeping solid10.1098/rspa.1993.0050 ↗
21. Assessment of room-temperature short-term stress relaxation and strain relaxation with recovery in Sn-Bi lead-free solders solidified under rotating magnetic field10.1016/j.jallcom.2017.09.272 ↗
22. Influence of rotating magnetic field on solidification microstructure and tensile properties of Sn-Bi lead-free solders10.1016/j.microrel.2017.10.035 ↗
23. Creep behaviour of eutectic SnBi alloy and its constituent phases using nanoindentation technique10.1016/j.jallcom.2013.04.057 ↗
24. Critical examinations of strain-rate sensitivity measured by nanoindentation methods: Application to severely deformed niobium10.1016/j.actamat.2007.10.039 ↗
25. Effects of precipitated phase and order degree on bending properties of an Fe-6.5 wt%Si alloy with columnar grains10.1557/jmr.2011.136 ↗
26. Precipitation hardening10.1007/BF02670416 ↗
27. The viscous properties of extruded eutectic alloys of lead-tin and bismuth-tin
28. The significance of strain weakening and self-annealing in a superplastic Bi-Sn eutectic alloy processed by high-pressure torsion10.1016/j.actamat.2019.11.064 ↗
29. Thermal expansion coefficients of bismuth10.1063/1.1735842 ↗
30. Structural, electronic and thermo-elastic properties of Cu6Sn5 and Cu5Zn8 intermetallic compounds: first-principles investigation10.1016/j.intermet.2009.12.032 ↗
31. Anisotropic thermal expansion of Ni3Sn4, Ag3Sn, Cu3Sn, Cu6Sn5 and βSn10.1016/j.intermet.2017.08.002 ↗
32. The status of rapid solidification of alloys in research and application10.1007/BF01120015 ↗
33. E.W. Collings, C.E. Mobley, R.E. Maringer, H.L. Gegel, in: B. Cantor (Ed.), Rapidly Quenched Metals III, Vol. 1, The Metals Society, London, (1878) 188.
34. Effect of silver and indium addition on mechanical properties and indentation creep behavior of rapidly solidified Bi–Sn based lead-free solder alloys10.1016/j.msea.2012.09.038 ↗
35. Strain-rate sensitivity of glasses10.1016/j.jnoncrysol.2014.08.023 ↗
36. A micro-indentation study of superplasticity in Pb, Sn and Sn-38wt%Pb10.1016/0001-6160(88)90319-7 ↗
37. Effects of minor alloying with Ge and In on the interfacial microstructure between Zn–Sn solder alloy and Cu substrate10.1016/j.jallcom.2020.154812 ↗
38. Wetting and interface microstructure between Sn-Zn binary alloys and Cu10.1557/JMR.1998.0391 ↗
39. Effect of Bi addition on the activation energy for the growth of Cu5Zn8 intermetallic in the Sn-Zn lead-free solder10.1016/j.intermet.2009.11.016 ↗
40. Improvement of microstructure and tensile properties of Sn–Bi–Ag alloy by heterogeneous nucleation of β-Sn on Ag3Sn10.1016/j.msea.2020.139372 ↗
41. The Ninth Edition of Metals Handbook
42. Antimony: its history, chemistry, mineralogy, geology, metallurgy, uses, preparations, analysis, production, and valuation; with complete bibliographies for students, manufacturers, and users of antimony
43. The phase equilibria in the Sb-Sn system-Part I: literature review10.1016/j.jallcom.2017.08.215 ↗
44. The phase equilibria in the Sb-Sn system - Part II: experimental results10.1016/j.jallcom.2017.11.367 ↗
45. EBSD image quality mapping10.1017/S1431927606060090 ↗
46. Solidification of undercooled Sn-Sb peritectic alloys: Part II. Heterogeneous nucleation10.1007/BF02670299 ↗
47. Grain refinement of aluminum alloys: Part I. The nucleant and solute paradigms-a review of the literature10.1007/s11661-999-0098-5 ↗
48. Texture analysis in hexagonal materials10.1016/S0254-0584(03)00168-8 ↗
49. Texture analysis in materials science: mathematical methods
50. Grain neighbour effects on twin transmission in hexagonal close-packed materials10.1038/ncomms13826 ↗
51. Slip, twinning, and fracture in hexagonal close-packed metals10.1007/BF02648537 ↗
52. Pseudo-steady indentation creep10.1142/S0217979210064162 ↗
53. H.L. Reynolds, Department of Materials Science and Mineral Engineering, University of California, Berkeley, (1998) 98.
54. Modeling the Bauschinger effect for sheet metals, part I: theory10.1016/S0749-6419(01)00046-8 ↗
55. Back stress strengthening and strain hardening in gradient structure10.1080/21663831.2016.1153004 ↗
56. Extraordinary strain hardening by gradient structure10.1073/pnas.1324069111 ↗
57. On strain hardening mechanism in gradient nanostructures10.1016/j.ijplas.2016.10.003 ↗
58. Mechanical deformation behavior and mechanism of Sn-58Bi solder alloys under different temperatures and strain rates10.1016/j.msea.2016.03.072 ↗
59. Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al10.1557/jmr.2011.156 ↗
60. Nanoprecipitates induced dislocation pinning and multiplication strategy for designing high strength, plasticity and conductivity Cu alloys10.1016/j.scriptamat.2021.113741 ↗
61. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗