journal article·2022-03

Nano-ceramic replacing cobalt in cemented carbide as binder phase: Is it feasible?

Jialin Sun, Yuan Chen, Jun Zhao

Publisher page

Abstract

Abstract In the present research, detailed investigation was carried out to explore the feasibility of using nano-ceramic as alternative binder to Co in WC-based cemented carbide by developing WC-6Al2O3, WC-6ZrO2 and WC-6MgO nanocomposite cemented carbide through hot-pressing sintering. Near-full densifications were obtained for WC-6Al2O3, WC-6ZrO2 and WC-6MgO nanocomposite cemented carbides at a sintering temperature of 1700℃ with a soaking time of 45 min under pressure of 40 MPa. The ceramic binders facilitated the consolidation process and enhanced the mechanical responses of the WC-based hardmetals. It is found that the nano-sized ceramic binders were located both along the WC grain boundaries and within the WC matrix grains. The main toughening mechanisms for WC with ceramic binders were interlacing distribution of crack deflection, crack bridging and crack branching. In case of WC with ZrO2 binder, stress-induced transformation toughening acted significantly to enhance the fracture toughness. Nano-ceramic phases, as alternative binders to Co, could significantly increase the freedom to tailor the microstructure, stability as well as properties of cemented carbides.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Orthopaedic implants and arthroplasty · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Development and application of WC-based alloys bonded with alternative binder phase10.1080/10408436.2018.1483320 ↗
2. Cemented tungsten carbide hardmetal - an introduction
3. Effect of hybrid texture combining micro-pits and micro-grooves on cutting performance of WC/Co-based tools10.1007/s00170-016-8452-4 ↗
4. Characterization and properties of sintered WC-Co and WC-Ni-Fe hard metal alloys10.1016/j.jallcom.2013.09.188 ↗
5. Production and indentation analysis of WC/Fe-Mn as an alternative to cobalt-bonded hardmetals10.1016/S1044-5803(02)00181-X ↗
6. Investigation on the mechanical properties of WC-Fe-Cu hard alloys10.1016/j.jallcom.2015.01.300 ↗
7. Carbide phases formed in WC-M (M=Fe/Ni/Cr) systems10.1016/j.ceramint.2007.11.001 ↗
8. Microstructure and mechanical properties of WC Ni-Si based cemented carbides developed by powder metallurgy10.1016/j.ijrmhm.2010.04.003 ↗
9. Effect of Mo and Co additions on the microstructure and properties of WC-TiC-Ni cemented carbides10.1016/j.ijrmhm.2011.07.011 ↗
10. Microstructure and mechanical properties of WC-Ni-Al based cemented carbides developed for engineering applications10.3139/146.110593 ↗
11. High-frequency induction-heated consolidation of nanostructured WC and WC-Al hard materials and their mechanical properties10.1016/j.ijrmhm.2016.07.024 ↗
12. Mechanical and microstructural properties of WC-based cermets: a comparative study on the effect of Ni and Mo binder phases10.1016/j.ceramint.2017.10.189 ↗
13. The role of Y2O3, Cu, Mo and Mo2C additives on optimizing the corrosion resistance of WC-6Co cemented carbide in HCl and NaOH solutions10.1016/j.jallcom.2020.154269 ↗
14. Comparison between ultrafine-grained WC-Co and WC-HEA cemented carbides10.1080/00325899.2016.1260903 ↗
15. L.L. Malin, An investigation of metallic glass as binder phase in hard metal, (2015).
16. Corrosion behaviour of WC-10%AISI304 cemented carbides10.1016/j.corsci.2015.08.006 ↗
17. High-temperature oxidation behaviour of WC-FeAl composite fabricated by spark plasma sintering10.1016/j.ceramint.2018.06.168 ↗
18. Abrasive wear of WC-FeAl-B and WC-Ni3Al-B composites10.1016/j.ijrmhm.2004.12.002 ↗
19. Properties and rapid sintering of nanostructured WC and WC-TiAl hard materials by the pulsed current activated heating
20. Ultrafine binderless WC-based cemented carbides with varied amounts of AlN nano-powder fabricated by spark plasma sintering10.1016/j.ijrmhm.2013.05.002 ↗
21. Mechanical properties and rapid consolidation of nanostructured WC and WC-Al2O3 composites by high-frequency induction-heated sintering10.1016/j.ijrmhm.2016.04.016 ↗
22. Development of WC-ZrO2 nanocomposites by spark plasma sintering10.1111/j.1551-2916.2004.00317.x ↗
23. Study of processing routes for WC-MgO composites with varying MgO contents consolidated by FAST/SPS10.1016/j.jeurceramsoc.2017.01.005 ↗
24. Effects and influence of Y2O3 addition on the microstructure and mechanical properties of binderless tungsten carbide fabricated by spark plasma sintering10.1016/j.ijrmhm.2017.11.016 ↗
25. In-situ elongated aluminium borate grains toughening WC-1.87wt%Al2O3–4.13 wt%ZrO2 composite via spark plasma sintering10.1016/j.ceramint.2019.06.208 ↗
26. Consolidation of binderless WC-TiC by high frequency induction heating sintering10.1016/j.ijrmhm.2007.01.006 ↗
27. Hot pressing densification and grain growth behavior of WC-TiC-TaC binderless carbide
28. materials obtained by pulsed electric current sintering10.1016/j.ijrmhm.2007.01.002 ↗
29. Influence and effectivity of VC and Cr3C2 grain growth inhibitors on sintering of binderless tungsten carbide10.1016/j.ijrmhm.2011.11.006 ↗
30. Preparation of WC-SiC whisker composites by hot pressing and their mechanical properties10.2320/matertrans.MRA2008019 ↗
31. A review of binderless tungsten carbide: development and application10.1007/s40820-019-0346-1 ↗
32. The optimization of mechanical property and corrosion resistance of WC-6Co cemented carbide by Mo2C content10.1016/j.ceramint.2020.04.011 ↗
33. Effects of lower cobalt binder concentrations in sintering of tungsten carbide10.1016/j.msea.2006.05.118 ↗
34. Effects of mixed carbon content on spark plasma sintering of binder-free nanostructured WC cemented carbides
35. SPS, binderless WC powders, and the problem of sub carbide10.1016/S0026-0657(09)70039-6 ↗
36. Microstructures of binderless tungsten carbides sintered by spark plasma sintering process10.1016/S0921-5093(03)00151-5 ↗
37. Bulk WC-Al2O3 composites prepared by spark plasma sintering10.1016/j.ijrmhm.2011.07.003 ↗
38. Spark plasma-sintered WC-ZrO2-Co nanocomposites with high fracture toughness and strength10.1111/j.1551-2916.2010.03685.x ↗
39. The Effect of Cr3C2 and TaC additives on microstructure, hardness and fracture toughness of WC-6Co tool material fabricated by spark plasma sintering10.1590/1980-5373-mr-2016-0889 ↗
40. Pressureless sintering and tribological properties of WC-ZrO2 composites10.1016/j.jeurceramsoc.2004.05.021 ↗
41. Processing of ultrafine ZrO2 toughened WC composites10.1016/j.jeurceramsoc.2009.07.013 ↗
42. Microstructure and characterization of WC-2.8 wt% Al2O3–6.8 wt% ZrO2 composites produced by spark plasma sintering10.1016/j.ceramint.2016.06.044 ↗