Improvement of microstructure and fracture toughness of MASC alloy by element substitution of Zr for Hf
Source abstract
Abstract
Abstract To improve microstructure and fracture toughness of MASC alloy, the effects of element substitution of Zr for Hf on the microstructure and room-temperature fracture toughness in Nb-24.7Ti-16Si-xHf-yZr-2.0Cr-1.9Al (x + y = 8.2) alloys have been investigated in this study. The results show that the substitution of Zr for Hf in MASC alloy promotes the eutectic reaction of (Nb, X)3Si phase → Nbss/γ(Nb, X)5Si3 eutectic, and shifts the eutectic point to higher Si content, which leads the microstructure transformation from hypereutectic structure to nearly eutectic structure. The primary γ(Nb, X)5Si3 phase content decreases and Nbss phase content increases with the increase of Zr content. The room-temperature fracture toughness increases with the increase of Zr content, and the room-temperature fracture toughness values of 4Zr-4.2Hf, 6Zr-2.2Hf and 8.2Zr-0Hf alloys are 16.03–16.29 MPa m1/2. The room-temperature fracture toughness value of 16.29 MPa m1/2 is the highest value in the nondirectionally solidified Nb-Si based alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. A review of very high temperature Nb silicide-based composites10.1007/s11661-003-0269-8 ↗
2. Effect of C addition on microstructure and mechanical properties of Nb–Si–Ti based alloys10.1016/j.msea.2021.140789 ↗
3. Advanced intermetallicalloys-beyond gamma titanium aluminides10.1016/S0921-5093(97)00555-8 ↗
4. Effect of gallium addition on the microstructure and micromechanical properties of constituents in NbSi based alloys10.1016/j.jallcom.2017.02.054 ↗
5. A review: interlayer joining of nickel base alloys
6. Microstructure and oxidation resistance of composition gradients Nb-Si based alloy thin film10.1016/j.matdes.2020.108687 ↗
7. Structure-property correlation and deformation mechanisms in ductile phase (Nbss) toughened cast Nb–Si alloys10.1016/j.jallcom.2021.159832 ↗
8. The oxidation behavior of high Cr and Al containing Nb-Si-Ti-Hf-Al-Cr alloys at 1200 and 1250 °C10.1016/j.ijrmhm.2017.08.006 ↗
9. High-temperature wettability and interactions between Hf-containing NbSi-based alloys and Y2O3 ceramics with various microstructures10.1016/j.matdes.2017.10.060 ↗
10. A computational approach to designing ductile Nb-Ti-Cr-Al solid-solution alloys10.1007/s11661-001-0037-6 ↗
11. Advanced intermetallic alloys-beyond gamma titanium aluminides10.1016/S0921-5093(97)00555-8 ↗
12. The balance of mechanical and environmental properties of a multielement niobium-niobium silicide-based In Situ composite10.1007/BF02595629 ↗
13. Ultrahigh-temperature Nb-silicide-based composites10.1557/mrs2003.192 ↗
14. Microstructures and mechanical properties of cast Nb-Ti-Si-Zr alloys10.1016/j.intermet.2008.03.005 ↗
15. Study of the effects of Zr addition on the microstructure and properties of Nb-Ti-Si based ultrahigh temperature alloys10.1016/j.intermet.2017.04.008 ↗
16. Isothermal oxidation mechanism of Nb-Ti-V-Al-Zr alloy at 700–1200 °C: diffusion and interface reaction10.1016/j.corsci.2015.04.002 ↗
17. Composite alloying effects of V and Zr on the microstructures and properties of multi-elemental Nb–Si based ultrahigh temperature alloys
18. Balancing the fracture toughness and tensile strength by multiple additions of Zr and Y in Nb–Si based alloys10.1016/j.intermet.2021.107172 ↗
19. Effect of Zr and Hf additions on microstructure and mechanical properties of Nb–Si based ultrahigh temperature alloys10.1016/j.jmrt.2020.11.013 ↗
20. Theoretical calculations and experimental measurements of the structure of Ti5Si3 with interstitial additions10.1016/S0966-9795(00)00064-9 ↗
21. Structural stability of intermetallic phases in the Si-Ti system. Point defects and chemical potentials in D88-Si3Ti5 phase10.1016/j.intermet.2010.03.028 ↗
22. Experimental investigation and thermodynamic modeling of Hf-Si-B system10.1016/j.jallcom.2010.01.050 ↗
23. On the fracture toughness of advanced materials10.1002/adma.200803322 ↗
24. Mechanisms of fatigue-crack propagation in ductile and brittle solids10.1023/A:1018655917051 ↗