Micro-hardness and strain-rate-dependent compressive response of an ultra-light-weight Mg-Li-Al alloy
Source abstract
Abstract
A study on the microstructure and composition, micro-hardness and strain-rate-dependent compressive behaviors, and the associated failure mechanisms of an ultra-light-weight Mg-Li-Al alloy were conducted. X-ray diffraction and X-ray photoelectron spectroscopy showed a multi-phase material with ~35 wt% Li and ~20 wt% Al, and a dendritic “fishbone” microstructure resulted from the high percentage of both Li and Al. Micro-indentation measurements showed a superior hardness (1.63 ± 0.08 GPa) that is> 1.5x higher than other Mg-Li-Al alloys reported in the literature, with a low density (~1.68 g/cm3) comparable to Mg alloys. Strain-rate-dependent uniaxial compression experiments demonstrated no strain-rate-sensitivity in the peak strength (699.4 ± 74.0 MPa) at strain rates between 10−5 and 103 s−1. High-speed imaging revealed a shear-mode brittle fracture under both quasi-static and dynamic conditions, with an additional splitting crack mechanism observed under dynamic loading. Crack propagation speeds demonstrated a positive correlation with strain rate from ~480 m/s at ~100 s−1 to ~1000 m/s at ~2000 s−1. Post-mortem analysis showed that the “fishbone” structure with a peeling fracture mechanism appears to be the dominant site promoting shear failure across all strain rates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Z. , Liu , K. , Zhang , X. , Zeng , Theoretical basis and application of magnesium-base lightweight alloys, 2002.
2. M. , Zhang , F. , Elkin , Magnesium–lithium superlight alloys, 2010.
3. Composition and microstructure dependent corrosion behaviour of mg-li alloys10.1016/j.electacta.2017.11.091 ↗
4. Application and investigation of mg-li alloys
5. The properties of some magnesium-lithium alloys containing aluminum and zinc10.1007/BF03399088 ↗
6. Microstructure evolution of mg–14% li–1% al alloy during the process of equal channel angular pressing10.1016/j.msea.2007.01.108 ↗
7. Room temperature aging characteristic of mglialzn alloy10.2320/matertrans.MER2008225 ↗
8. Deformability and strengthening of superlight mg-li alloys
9. Superplasticity, dynamic grain growth and deformation mechanism in ultra-light two-phase magnesium–lithium alloys10.1016/j.msea.2009.12.029 ↗
10. Effects of alloying elements on the microstructure and corrosion behavior of mg–li–al–y alloys10.1016/j.jallcom.2020.154344 ↗
11. Microstructure and hardness of mg–9li–6al–xla (x= 0, 2, 5) alloys during solid solution treatment10.1016/j.msea.2014.12.014 ↗
12. Microstructure, texture, and mechanical properties of as-extruded mg-xli-3al-2zn-0.2 zr alloys (x= 5, 7, 8, 9, 11 wt%)10.1016/j.msea.2019.04.007 ↗
13. Microstructure and mechanical properties of mg–xli–3al–1sn–0.4 mn alloys (x= 5, 8 and 11 wt%)10.1016/j.jallcom.2013.08.154 ↗
14. Elektrische leitfähigkeit und zustandsdiagramm bei binären legierungen. 11. mitteilung. das system lithium-magnesium
15. The li-mg (lithium-magnesium) system10.1007/BF02872951 ↗
16. Effects of li on microstructures and corrosion behaviors of mg–li–al alloys
17. Effects of ce-rich re additions and heat treatment on the microstructure and tensile properties of mg–li–al–zn-based alloy10.1016/j.msea.2010.11.063 ↗
18. J. Dutkiewicz, P. Bobrowski, S. Rusz, O. Hilser, T. A. Tański, W. Borek, M. Lagoda, P. Ostachowski, P. Palka, G. Boczkal, et al., Effect of various spd techniques on structure and superplastic deformation of two phase mglial alloy, Metals and Materials International 24, 2018, 1077–1089.10.1007/s12540-018-0118-3 ↗
19. A high-specific-strength and corrosion-resistant magnesium alloy10.1038/nmat4435 ↗
20. Processing and nano-mechanical characterization of mg-li-al based alloys10.1016/j.mspro.2014.07.303 ↗
21. In vitro and in vivo evaluation of multiphase ultrahigh ductility mg–li–zn alloys for cardiovascular stent application10.1021/acsbiomaterials.7b00854 ↗
22. Precipitation strengthening in an ultralight magnesium alloy
23. Effect of grain refinements on the microstructure and thermal behaviour of mg–li–al alloy10.1007/s10973-018-7223-x ↗
24. Improving the superplastic properties of a two-phase mg–8% li alloy through processing by ecap10.1016/j.msea.2005.08.143 ↗
25. Thermomechanical processing of an ultralight mg-14li-1al alloy10.1007/s00170-020-06032-z ↗
26. Mechanical behavior of mg-li-al alloys10.1016/j.matpr.2018.06.123 ↗
27. Development of lightweight mglial alloys with high specific strength10.1016/j.jallcom.2016.04.109 ↗
28. Effects of friction stir process and stabilizing heat treatment on the tensile and punch-shear properties of mg–9li–2al–1zn magnesium alloy10.2320/matertrans.M2012314 ↗
29. Al–cu–li and al–mg–li alloys: phase composition, texture, and anisotropy of mechanical properties10.1134/S0036029516040042 ↗
30. Magnesium-lithium base alloys-preparation, fabrication, and general characteristics10.1007/BF03398089 ↗
31. Reviews on the influences of alloying elements on the microstructure and mechanical properties of aluminum alloys and aluminum alloy composites
32. Design of a mg-li-al-zn alloy by means of calphad approach10.1007/s10820-005-0883-4 ↗
33. Statistical optimization of stress level in mg-li-al alloys upon hot compression testing10.1016/j.jma.2019.03.003 ↗
34. Improvement of mechanical behaviors of a superlight mg-li base alloy by duplex phases and fine precipitates10.1016/j.jallcom.2017.12.025 ↗
35. Characterization and analysis of hot compression behaviors of an ultralight mg-li-al alloy
36. Effect of strain rate on compressive mechanical properties of extruded mg–8li–1al–1ce alloy10.1016/j.matdes.2013.01.049 ↗
37. The materials project: a materials genome approach to accelerating materials innovation10.1063/1.4812323 ↗
38. A. E92–16, Standard test methods for vickers hardness and knoop hardness of metallic materials, West Conshohocken, PA, 2016.
39. Characterization and mechanical testing on novel (γ+ α2)–tial/ti3al/al2o3 cermet10.1016/j.msea.2019.02.039 ↗
40. Evaluation of ceramic specimen geometries used in a split hopkinson pressure bar
41. Specimen size and shape effect in split hopkinson pressure bar testing10.1243/03093247JSA538 ↗
42. Static and dynamic compression strength of hot-pressed boron carbide using a dumbbell-shaped specimen10.1007/s10853-017-1210-7 ↗
43. Dynamic compression strength of ceramics: What was learned from an interlaboratory round robin exercise?
44. On the rate-dependency of mechanical properties and failure mechanisms of a (γ+ α2)-tial/ti3al-al2o3 cermet10.1016/j.msea.2020.139747 ↗
45. Y. , Wang , D. , Zhou , H. , Liu , S.M. , Zakir , Y. , Li , Dynamic fracture process and strain rate effect of a porous sic ceramic, in: Multidisciplinary Digital Publishing Institute Proceedings, volume 2, p. 509.10.3390/ICEM18-05409 ↗
46. Dynamic failure and inelastic deformation behavior of sic ceramic under uniaxial compression10.1016/j.ceramint.2019.09.011 ↗
47. Dynamic deformation characteristics of zirconium diboride–silicon carbide under multi-axial confinement10.1016/j.ijimpeng.2016.01.009 ↗
48. Dynamic brazilian test of brittle materials using the split hopkinson pressure bar and digital image correlation10.1111/str.12118 ↗
49. On the use of digital image correlation for the analysis of the dynamic behavior of materials
50. Microstructural and mechanical characterization of variability in porous advanced ceramics using x-ray computed tomography and digital image correlation10.1016/j.matchar.2019.109929 ↗
51. The correlation between dendritic microstructure and mechanical properties of directionally solidified hypoeutectic al-ni alloys10.1007/s12540-010-0039-2 ↗
52. Design of mechanical properties of a zn27al alloy based on microstructure dendritic array spacing10.1016/j.matdes.2006.09.009 ↗
53. Columnar dendrite growth: experiments on tip growth10.1016/0022-0248(85)90208-8 ↗
54. Refining mechanism of the electric current pulse on the solidification structure of pure aluminum10.1016/j.actamat.2007.01.014 ↗
55. Y.-h. Sun, R.-c. Wang, C.-q. Peng, F. Yan, Y. Ming, Recent progress in mg-li matrix composites, Transactions of Nonferrous Metals Society of China 29, 2019, 1–14.10.1016/S1003-6326(18)64909-X ↗
56. H. , Hu , X. , Nie , Y. , Ma , Corrosion and surface treatment of magnesium alloys, Magnesium Alloys-Properties in Solid and Liquid States; Czerwinski, F., Ed, 2014, 67–108.
57. Kinetics of oxidation of lithium10.1039/tf9625801177 ↗
58. The al-li-mg system (aluminum-lithium-magnesium)10.1007/BF02841712 ↗
59. Experimental study and thermodynamic calculation of the al-li-mg equilibrium phase diagram
60. A new paradigm in the design of aluminum alloys for aerospace applications
61. Correlation of dynamic compressive properties, adiabatic shear banding, and ballistic performance of high-strength 2139 and 7056 aluminum alloys10.1016/j.msea.2021.140757 ↗
62. On the crashworthiness performance of thin-walled energy absorbers: recent advances and future developments10.1016/j.tws.2017.05.018 ↗
63. Avedesian · 1999
64. Effects of yal2 reinforced particles on the tribological properties of la143 alloy under dry sliding condition
65. High strength and plastic deformability of mg–li–al alloy with dual bcc phase produced by a combination of heat treatment and multi-directional forging in channel die10.1016/j.msea.2019.138867 ↗
66. T. Xin, Y. Zhao, R. Mahjoub, J. Jiang, A. Yadav, K. Nomoto, R. Niu, S. Tang, F. Ji, Z. Quadir, et al., Ultrahigh specific strength in a magnesium alloy strengthened by spinodal decomposition, Science Advances 7, 2021, eabf3039.10.1126/sciadv.abf3039 ↗
67. Experimental measurement of diffusion coefficients and assessment of diffusion mobilities in hcp mg–li–al alloys10.1016/j.calphad.2020.101999 ↗
68. Research progress on the corrosion behavior of magnesium–lithium-based alloys: a review10.1007/s40195-018-0847-9 ↗
69. Stress-strain compression of aa6082-t6 aluminum alloy at room temperature10.1155/2014/387680 ↗
70. Buckling behaviors of section aluminum alloy columns under axial compression10.1016/j.engstruct.2015.03.064 ↗
71. Local buckling of aluminum alloy angles under uniform compression10.1061/(ASCE)ST.1943-541X.0000289 ↗
72. A comparison of the deformation of magnesium alloys with aluminium and steel in tension, bending and buckling10.1016/j.matdes.2005.03.005 ↗
73. Twinning and texture development in two mg alloys subjected to loading along three different strain paths10.1016/j.actamat.2007.03.006 ↗
74. The mechanics of dynamic twinning in single crystal magnesium10.1016/j.jmps.2018.03.010 ↗
75. Influence of microstructure on the impact failure of alumina10.1016/j.msea.2019.138549 ↗
76. E. , Strassburger , H. , Senf , Experimental Investigations of Wave and Fracture Phenomena in Impacted Ceramics and Glasses., Technical Report, Fraunhofer-Inst Fuer Kurzzeitdynamik-Ernst-Mach-Inst Weil Am Rhein (Germany), 1995.
77. Failure mechanisms of a whisker-reinforced ceramic tool when machining nickel-based alloys10.1016/S0043-1648(96)07476-5 ↗
78. Failure mechanisms of pure silver, pure aluminum and silver–aluminum alloy under high current stress10.1016/j.microrel.2006.01.011 ↗
79. Cleavage cracking of ductile-metal substrates induced by brittle coating fracture10.1016/j.actamat.2018.04.017 ↗
80. Mechanical properties enhancement of mg–4si in-situ composites by friction stir processing10.1080/02670836.2020.1866848 ↗
81. Shear instability and considerably localized melting in quasi-static compression10.1016/j.matchar.2019.110081 ↗
82. X-ray computed tomography quantification of damage in concrete under compression considering irreversible mode-ii microcracks10.1111/ffe.12611 ↗
83. High rate response and dynamic failure of structural ceramics10.1111/j.1744-7402.2004.tb00176.x ↗
84. Direct observation of the dynamic compressive failure of a transparent polycrystalline ceramic (alon)10.1111/j.1551-2916.2006.00965.x ↗
85. Micromechanisms associated with the dynamic compressive failure of hot-pressed boron carbide10.1016/j.scriptamat.2015.05.004 ↗
86. Serrated flow and abnormal strain rate sensitivity of a magnesium–lithium alloy10.1016/j.matlet.2006.02.093 ↗
87. Dynamic compression behavior of 6005 aluminum alloy aged at elevated temperatures10.1016/j.vacuum.2018.06.066 ↗
88. Behaviors of three bcc metal over a wide range of strain rates and temperatures: experiments and modeling10.1016/S0749-6419(99)00030-3 ↗
89. Nano-structured vanadium: processing and mechanical properties under quasi-static and dynamic compression10.1016/j.scriptamat.2003.10.010 ↗
90. High strain rate properties of metals and alloys10.1179/174328008X277795 ↗
91. The role of plasticity as a limiting factor in the compressive failure of high strength ceramics10.1016/S0167-6636(98)00023-4 ↗
92. In situ time-resolved measurements of extension twinning during dynamic compression of polycrystalline magnesium10.1007/s40870-018-0152-8 ↗
93. Importance of twinning in static and dynamic compression of a ti–6al–4v titanium alloy with an equiaxed microstructure10.1016/j.msea.2011.12.047 ↗
94. Dislocation nucleation and motion in metals and alloys at high-rate deformation: molecular dynamic simulation10.3103/S0025654415010057 ↗
95. Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals10.1016/j.msea.2004.03.064 ↗
96. Validation of a model for static and dynamic recrystallization in metals10.1016/j.ijplas.2011.12.006 ↗
97. Plastic deformation and dynamic recrystallization behaviors of mg–5gd–4y–0.5 zn–0.5 zr alloy10.1016/j.msea.2007.08.069 ↗
98. Deformation behaviors and microstructure evolution of tibw/ta15 composite with novel network architecture10.1016/j.jallcom.2017.06.197 ↗
99. High strain rate dynamic behaviour of alsi12 alloy processed by selective laser melting10.1007/s00170-018-1873-5 ↗
100. Mechanical properties of slm-printed aluminium alloys: a review10.3390/ma13194301 ↗