Grain morphology evolution mechanism of titanium alloy by the combination of pulsed arc and solution element during wire arc additive manufacturing
Source abstract
Abstract
Abstract Coarse columnar grains formed during titanium alloy additive manufacturing (AM) are generally regarded as unfavorable, which trend to cause solidification defects and mechanical property anisotropy. Achieving the columnar to equiaxed transition (CET) of grain structures has been a great challenge, especially for wire arc additive manufacturing (WAAM) with the highly localized heat input and large temperature gradient. The interdependence model is widely used to explain and predict the grain size and evolution during the welding or AM process. However, the thermal undercooling and the molten pool flow which were neglect in its assumption have been found to have obvious effects on the grain morphology evolution. In this work, different deposition experiments with the combination of growth restricting solutes (boron), nucleant particles (La2O3), and pulsed arc were employed to investigate these intrinsic factors which are often neglected how to influence the grain morphology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Grain refinement of alloys in fusion-based additive manufacturing processes10.1007/s11661-020-05880-4 ↗
2. Recent advances in grain refinement of light metals and alloys10.1016/j.cossms.2015.10.001 ↗
3. Morphology investigation on direct current pulsed gas tungsten arc welded additive layer manufactured ti6al4v alloy10.1007/s00170-011-3299-1 ↗
4. A new approach to nuclei identification and grain refinement in titanium alloys10.1016/j.jallcom.2019.04.224 ↗
5. Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing10.1016/j.actamat.2019.02.020 ↗
6. Wire-feed additive manufacturing of metal components: technologies, developments and future interests10.1007/s00170-015-7077-3 ↗
7. Invited review article: strategies and processes for high quality wire arc additive manufacturing
8. In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance10.1016/j.actamat.2016.12.027 ↗
9. Microstructures of laser-deposited Ti–6Al–4V10.1016/j.matdes.2003.09.009 ↗
10. Grain morphology control and texture characterization of laser solid formed Ti6Al2Sn2Zr3Mo1.5Cr2Nb titanium alloy10.1016/j.jmatprotec.2016.07.011 ↗
11. Grain morphology evolution and texture characterization of wire and arc additive manufactured Ti-6Al-4V10.1016/j.jallcom.2018.07.235 ↗
12. Mapping the geometry of Ti-6Al-4V: from martensite decomposition to localized spheroidization during selective laser melting10.1016/j.scriptamat.2020.02.043 ↗
13. A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles10.1016/S1359-6454(00)00368-2 ↗
14. Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions10.1016/j.actamat.2015.03.035 ↗
15. Refining As-cast β-Ti grains through ZrN inoculation10.1007/s11661-018-4531-5 ↗
16. Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing10.1016/j.actamat.2019.02.020 ↗
17. Peritectic titanium alloys for 3D printing10.1038/s41467-018-05819-9 ↗
18. Non-negative matrix factorization for the near real-time interpretation of absorption effects in elemental distribution images acquired by X-ray fluorescence imaging10.1107/S1600577515023528 ↗
19. Improvement of mechanical properties of ferritic stainless steel weld metal by ultrasonic vibration10.1016/j.jmatprotec.2010.05.015 ↗
20. Application of ultrasonic vibrations in welding and metal processing: a status review10.1016/j.jmapro.2017.02.027 ↗
21. Ultrasonic irradiation induced the microstructure refinement and texture evolution of Ti–6Al–4V TIG weld seam
22. Development of high frequency tungsten inert gas welding method10.1016/j.matdes.2012.07.054 ↗
23. Microstructural refinement of weld fusion zones in α–β titanium alloys using pulsed current welding10.1016/S0921-5093(98)01010-7 ↗
24. Effects of boron on microstructure in cast titanium alloys10.1016/j.scriptamat.2008.05.002 ↗
25. Grain refinement of wire arc additively manufactured titanium by the addition of silicon10.1016/j.jallcom.2016.11.049 ↗
26. Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting10.1016/j.actamat.2014.01.018 ↗
27. A new approach to nuclei identification and grain refinement in titanium alloys10.1016/j.jallcom.2019.04.224 ↗
28. Grain refinement of additive manufactured Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy by the addition of La2O310.1016/j.matlet.2020.128170 ↗
29. Microstructure and physical performance of laser-induction nanocrystals modified high-entropy alloy composites on titanium alloy10.1016/j.matdes.2016.12.007 ↗
30. Grain structure control during metal 3D printing by high-intensity ultrasound10.1038/s41467-019-13874-z ↗
31. Grain refinement of wire arc additive manufactured titanium alloy by the combined method of boron addition and low frequency pulse arc10.1016/j.msea.2020.140557 ↗
32. Microstructure and mechanical properties of wire arc additive repairing Ti–5Al–2Sn–2Zr–4Mo–4Cr titanium alloy10.1080/02670836.2020.1822061 ↗
33. The anisotropy of laser melting deposition additive manufacturing Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy10.1016/j.matdes.2014.11.001 ↗
34. Microstructure and mechanical properties of hybrid fabricated Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy by laser additive manufacturing10.1016/j.msea.2014.04.019 ↗
35. The effects of low frequency on the microstructure and mechanical properties of high-strength Al-Mg aluminum alloys by wire and double-pulsed arc additive manufacturing10.1007/s11665-018-3710-2 ↗
36. Reducing porosity and refining grains for arc additive manufacturing aluminum alloy by adjusting arc pulse frequency and current
37. Wire arc additive manufacturing of AZ31 magnesium alloy: grain refinement by adjusting pulse frequency10.3390/ma9100823 ↗
38. Mechanistic models for additive manufacturing of metallic components10.1016/j.pmatsci.2020.100703 ↗
39. A systematic investigation of the effects of process parameters on heat and fluid flow and metallurgical conditions during laser-based powder bed fusion of Ti6Al4V alloy10.1016/j.ijheatmasstransfer.2019.05.017 ↗
40. The Interdependence Theory: the relationship between grain formation and nucleant selection10.1016/j.actamat.2011.04.035 ↗
41. Investigating the morphological effects of solute on the β-phase in as-cast titanium alloys10.1016/j.jallcom.2018.11.063 ↗
42. Refining As-cast β-Ti grains through ZrN inoculation10.1007/s11661-018-4531-5 ↗
43. An analytical approach for predicting as-cast grain size of inoculated aluminum alloys10.1016/j.actamat.2015.08.006 ↗
44. Modeling and application of continuous growth restriction factor for elucidating development of as-welded grain size10.1016/j.jallcom.2017.12.268 ↗
45. Gas tungsten arc welding of network structured titanium matrix composite10.1080/13621718.2017.1391937 ↗
46. Titanium sponge as a source of native nuclei in titanium alloys10.1016/j.jallcom.2019.153353 ↗
47. Microstructure formation and mechanical properties of a wire-arc additive manufactured magnesium alloy10.1007/s11837-021-04567-4 ↗
48. Grain refinement and improved tensile properties of Ti5Al2Sn2Zr4Mo4Cr titanium alloy fabricated by laser solid forming10.1016/j.msea.2020.140388 ↗
49. S. Kou, Welding Metallurgy, 2002. https://doi.org/10.1002/0471434027.10.1002/0471434027 ↗
50. Microstructure, tensile properties of Ti-6Al-4V by ultra high pulse frequency GTAW with low duty cycle10.1016/j.jmatprotec.2014.08.026 ↗
51. The effects of low frequency on the microstructure and mechanical properties of high-strength Al-Mg aluminum alloys by wire and double-pulsed arc additive manufacturing10.1007/s11665-018-3710-2 ↗
52. Grain refinement, hardening and metastable phase formation by high current pulsed electron beam (HCPEB) treatment under heating and melting modes10.1016/j.jallcom.2010.04.010 ↗
53. Study of high frequency pulsed arc on molten pool thermal properties of Ti-6Al-4V10.1016/j.jmapro.2019.01.034 ↗
54. A pathway to microstructural refinement through double pulsed gas metal arc welding10.1016/j.scriptamat.2017.02.034 ↗
55. Numerical and experimental study of arc and weld pool behaviour for pulsed current GTA welding10.1016/j.ijheatmasstransfer.2010.12.005 ↗