Deformation mechanism in particulate metal matrix composites
Source abstract
Abstract
Abstract A new approach based on modified stress and strain with considering micromechanics and dislocation theory, has been extended to find the deformation mechanism during hot deformation of particulate metal matrix composite. The impact of main influential processing parameters, such as temperature, strain, and strain rate in addition to reinforcement characteristics, i.e., particle size, and volume fraction, were successfully taken into account in the calculation of deformation activation energy and stress exponent. Besides, the effect of particle fracture, and diffusion relaxation around particles, were participated in the presented formulation. To evaluate the applicability of the developed formulation, different aluminum matrix particulate composites with different particle sizes and volume fractions were subjected to investigation. Using the modified recovery stress for calculating the activation energy, results in reduction of the stress exponent to a meaningful range. It was shown that deformation mechanisms in metal matrix composite and unreinforced alloy are the same. It was also found that for the low value of stress, i.e., the low strain rate and high temperature, the stress relaxation, and for the high value stress, the particle fracture, disturb the load transfer mechanism and reduce the impact of reinforcement on activation energy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Particulate reinforced metal matrix composites10.1007/BF00544448 ↗
2. Hot deformation behavior and microstructural evolution of particulate-reinforced AA6061/B4C composite during compression at elevated temperature10.1016/j.msea.2017.03.013 ↗
3. Forming behavior and workability of 6061/B4C P composite during hot deformation10.1016/j.compscitech.2011.02.009 ↗
4. Hot workability and deformation mechanisms in Mg/nano – Al2O3 composite10.1016/j.compscitech.2009.01.032 ↗
5. Powder metallurgy of Al-based metal matrix composites reinforced with b-Al3Mg2 intermetallic particles: analysis and modeling of mechanical properties10.1016/j.actamat.2009.06.017 ↗
6. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
7. Dislocation-particle interactions during high temperature deformation of two-phase aluminium alloys10.1016/0001-6160(87)90281-1 ↗
8. The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials10.1016/j.pmatsci.2017.10.004 ↗
9. Cavity formation from inclusions in ductile fracture10.1007/BF02672306 ↗
10. Plasticity of a two-phase composite with partially debonded inclusions
11. Some observations on the high-temperature creep behavior of 6061 AI-SiC composites10.1007/BF02647258 ↗
12. High temperature creep behavior of metal matrix Aluminum-SiC composites10.1016/0956-7151(93)90094-9 ↗
13. Threshold stress and load partitioning during creep of metal matrix composites10.1016/j.actamat.2008.01.037 ↗
14. Hot workability and flow characteristics of aluminum-5 wt% B 4C composite10.1007/s11665-014-0891-1 ↗
15. Investigations on the hot workability characteristics and deformation mechanisms of aluminium alloy-Al2O3 nanocomposite10.1016/j.matdes.2015.04.024 ↗
16. Constitutive flow behavior and hot workability of powder metallurgy processed 20 vol% SiC P/2024Al composite10.1016/j.msea.2010.08.080 ↗
17. An examination of the breakdown in creep by viscous glide in solid solution alloys at high stress levels10.1016/0001-6160(82)90139-0 ↗
18. Brandes · 1992
19. Viscous glide, dislocation climb and newtonian viscous deformation mechanisms of high temperature creep in al-3mg10.1016/0001-6160(72)90135-6 ↗
20. Kassner · 2008
21. Creep deformation of metal-matrix composites10.1016/0266-3538(85)90010-7 ↗
22. A theory of particle-reinforced plasticity10.1115/1.3173618 ↗
23. The elastic field outside an ellipsoidal inclusion
24. The determination of the elastic field of an ellipsoidal inclusion, and related
25. Average stress in matrix and average elastic energy of materials with misfitting inclusion10.1016/0001-6160(73)90064-3 ↗
26. The influence of particle size and particle fracture on the elastic/plastic deformation of metal matrix composites10.1016/1359-6454(96)00008-0 ↗
27. Clyne · 1995
28. A dislocation assisted self-consistent constitutive model for the high-temperature deformation of particulate metal-matrix composite10.1080/14786435.2020.1833376 ↗
29. High strain rate superplasticity in metal matrix composites: the role of load transfer
30. Diffusion relaxation of stress concentration relaxation of stress at second phase particles10.1016/0001-6160(78)90064-0 ↗
31. A one paramete approach to determing the critical conditions for the initiation of dynamic recrystalization
32. A micromechanical model of particle-reinforced metal matrix composites considering particle size and damage10.1016/j.commatsci.2014.01.012 ↗
33. Analytical study on deformation behavior of metal matrix composite10.1016/0924-0136(90)90189-2 ↗
34. Size-dependent inelastic behavior of particle-reinforced metal±matrix composites10.1016/S0266-3538(00)00235-9 ↗
35. A new approach to modeling the flow curve of hot deformed austenite10.2355/isijinternational.51.945 ↗
36. An investigation of the silicon role on austenite recrystallization10.1016/S0167-577X(02)00659-6 ↗
37. Prediction of 42CrMo steel flow stress at high temperature and strain rate10.1016/j.mechrescom.2007.10.002 ↗
38. M. Rezayat, M.H. Parsa, H. Mirzadeh, J.M. Cabrera, Microstructural investigation of Al-Mg/B 4C composite deformed at elevated temperature, 763, 2018, pp. 643–651.10.1016/j.jallcom.2018.05.324 ↗
39. Deformation mechanisms during low- and high- temperature superplasticity in 5083 Al-Mg alloy10.1007/s11661-002-0062-0 ↗
40. Deformation and reconstruction mechanisms in coarse-grained superplastic Al – Mg alloys10.1016/j.actamat.2006.04.014 ↗
41. Controlling mechanisms of deformation of AA5052 aluminium alloy at small strains under hot working conditions10.1016/j.msea.2004.11.010 ↗
42. Creep behavior of Al-2.2 at% Mg alloy at 573 K
43. The transition form dislocation climb to viscous glide in creep of solid solution alloys10.1016/0001-6160(74)90088-1 ↗
44. Ab initio calculations of the generalized stacking fault energy in aluminium alloys10.1016/j.scriptamat.2011.01.034 ↗
45. Geometric dynamic recrystallization in hot torsion of A1-5Mg-0.6Mn10.1016/0921-5093(95)09990-5 ↗
46. Hot deformation behavior of the new Al – Mg – Si – Cu aluminum alloy during compression at elevated temperatures10.1016/j.matchar.2006.04.012 ↗
47. Dynamic recrystallisation and dynamic precipitation in AA6061 aluminium alloy during hot deformation10.1179/1743284714Y.0000000538 ↗
48. Comparative study of hot-processing maps for 6061 aluminium alloy constructed from power constitutive equation and hyperbolic sine constitutive equation10.1179/1743284714Y.0000000569 ↗
49. The effects of grain size on the hot deformation and processing map for 7075 aluminum alloy10.1016/j.matdes.2013.04.034 ↗
50. Processing maps for hot deformation of the extruded 7075 aluminum alloy bar: anisotropy of hot workability10.1016/j.msea.2014.07.072 ↗
51. An investigation into the hot deformation characteristics of 7075 aluminum alloy10.1016/j.matdes.2010.12.047 ↗
52. Softening mechanism and microstructure evolution of as-extruded 7075 aluminum alloy during hot deformation