Effects of solidification rate on the leaching behavior of metallic impurities in metallurgical grade silicon
Source abstract
Abstract
Abstract Precipitation of the impurity phase during the solidification of metallurgical grade silicon melt determines the distribution law and occurrence state of impurities in silicon, while also determining the removal efficiency of impurities during the leaching process. In this research, distribution and occurrence states of inclusions in silicon at different solidification rates were detected via an electron probe microanalyzer (EPMA). Results have shown that the size of the inclusions becomes larger following electric resistance remelting, and some new impurity phases are generated, such as the VSi2 phase, TiSi2 phase, Si-Fe-Al-Ni-Zr phase, and Si25FeAl2Ca16NiCu2 phase. It is seen that there are clear boundaries between different phases. In addition, based on agitation leaching of 4.0 mol·L−1 HCl and 2.0 mol·L−1 HF mixed acid, it was found that most of the impurities in industrial silicon were effectively removed during this process. The impurities in the industrial silicon decreased from 5233.0 ppmw to 181.7 ppmw. The precipitation of the Si-Fe-Al-Ni-Zr (Cu) phase was the main factor providing improved efficiency of impurity removal, which exposed the impurity elements to the greatest extent. Industrial silicon was subjected to resistance remelting at different solidification rates, and the removal effects of impurities were also different. The impurity removal effect was optimal at a solidification rate of 1 °C/min, as the impurities were reduced to 131.9 ppmw.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Segregation behavior of metal impurities during Al-Si melt directional solidification with an open ended crucible10.1007/s12633-017-9602-5 ↗
2. Removal of metal impurities in metallurgical grade silicon by cold crucible continuous melting and directional solidification10.1016/j.seppur.2017.06.073 ↗
3. Segregation and removal of transition metal impurities during the directional solidification refining of silicon with Al-Si solvent10.1016/j.jallcom.2019.07.089 ↗
4. Zou · Metals · 2020 · 10 · 15510.3390/met10010155 ↗
5. Simulation analysis on impurity distribution in mc-Si grown by directional solidification for solar cell applications10.3139/146.111375 ↗
6. Exploration on the removal of arsenic in silicon under electron beam melting condition10.1016/j.vacuum.2019.05.006 ↗
7. Effects of pulling rate on metal impurity removal during Si refining in Ti-90 wt% Si alloy directional solidification10.1016/j.jallcom.2019.152621 ↗
8. Refining of MG-Si by hybrid melting using steam plasma and EMC10.1016/j.solmat.2010.02.011 ↗
9. The variation of interface segregation coefficients with growth rate of crystals10.1016/0022-0248(71)90131-X ↗
10. Review of silicon recovery and purification from saw silicon powder10.1007/s11837-020-04183-8 ↗
11. Enhanced acid leaching of metallurgical grade silicon in hydrofluoric acid containing hydrogen peroxide as oxidizing agent10.1016/j.hydromet.2016.06.003 ↗
12. Purification of metallurgical-grade silicon by acid leaching10.1007/s12633-018-0018-7 ↗
13. Espelien · J. Safari Energ. Technol. · 2017 · 355
14. The effect of secondary refining on the removal of phosphorus from metallurgical-grade silicon by acid leaching10.1007/s11663-017-1042-5 ↗
15. Effect of oxidizing agents on the hydrometallurgical purification of metallurgical grade silicon10.1016/j.hydromet.2012.03.007 ↗
16. Hydrometallurgical purification of metallurgy grade silicon by acid leaching10.4028/www.scientific.net/AMR.549.428 ↗
17. Lai · Ind. Eng. Chem. Res. · 2017 · 56 · 31110.1021/acs.iecr.6b02245 ↗
18. Cui · Refractories · 2018 · 6 · 459
19. Purification of metallurgical-grade silicon combining Sn–Si solvent refining with gas pressure filtration10.1039/C9RA09077K ↗
20. Recycling of silicon kerf loss derived from diamond-wire saw cutting process to prepare silicon nitride10.1016/j.jclepro.2019.119163 ↗
21. Silicon-based anode materials with three-dimensional conductive network for high-performance lithium ion batteries10.1504/IJNM.2019.097245 ↗