Effect of HfC addition on the microstructure and properties of W–4.9Ni–2.1Fe heavy alloys
Source abstract
Abstract
Abstract In this study, W–4.9Ni–2.1Fe-xHfC mixed alloy powders were prepared by secondary high-energy ball milling and secondary hydrogen annealing, and then sintered and consolidated by spark plasma sintering (SPS) techniques. The microstructure, mechanical properties, wear resistance and corrosion behavior of alloy were obtained by Vickers hardness tester, X-ray diffraction, scanning electron microscopy, reciprocating frictional wear testing machine, CHI 660 E electrochemical workstation and electronic universal testing machine. The results showed that a certain amount of Hafnium carbide (HfC) could effectively inhibit the growth of W particles during sintering process, make the bonding phase disperse more evenly, and effectively improve the hardness, relative density, compression strength, friction and wear properties as well as corrosion resistance of alloy. When the content of HfC was excessive, the inhibition effect of particle growth would be weakened and the bonding phase tended to agglomerate, affecting the strength and hardness, and reducing the abrasion performance and corrosion resistance of alloy. By comparison, the alloy with 0.4 wt% HfC showed the best comprehension performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Densification behavior of nanocrystalline W-Ni-Fe composite powders prepared by sol-spray drying and hydrogen reduction process10.1016/j.jallcom.2009.09.050 ↗
2. Mechanical properties of tungsten heavy alloy and damage behaviors after hypervelocity impact10.1007/s12598-014-0320-5 ↗
3. Sintering of tungsten and tungsten heavy alloys of W–Ni–Fe and W–Ni–Cu: a review
4. Microstructure and mechanical properties of spark plasma sintered tungsten heavy alloys10.1016/j.msea.2017.10.080 ↗
5. Constitutive modeling of two-phase metallic composites with application to tungsten-based composite 93W–4.9Ni–2.1Fe10.1016/j.msea.2013.11.007 ↗
6. Microstructure and properties of W–4.9 Ni–2.1 Fe heavy alloy with Dy2O3 addition10.1007/s12598-019-01246-x ↗
7. Densification of SiC particle reinforced W–Ni–Fe heavy alloy composites through conventional and spark plasma sintering10.1007/s12666-017-1041-x ↗
8. Effect of alloying addition and microstructural parameters on mechanical properties of 93% tungsten heavy alloys10.1016/j.msea.2015.05.046 ↗
9. Effect of heating mode and sintering temperature on the consolidation of 90W–7Ni–3Fe alloys10.1016/j.jallcom.2010.09.008 ↗
10. On structure property correlation in high strength tungsten heavy alloys10.1016/j.ijrmhm.2017.05.002 ↗
11. Effect of heat treatment on microstructure and mechanical properties of hot-hydrostatically extruded 93W–4.9Ni–2.1Fe alloy10.1016/j.jallcom.2014.11.009 ↗
12. Effect of swaging on microstructure and tensile properties of W–Ni–Fe alloys10.1016/j.ijrmhm.2013.08.013 ↗
13. Synthesis of nanosized composite powders via a wet chemical process for sintering high performance W–Y2O3 alloy10.1016/j.ijrmhm.2017.09.001 ↗
14. Mechanical properties and microstructural change of W–Y2O3 alloy under helium irradiation
15. Development of ultra-fine grained W–(0.25-0.8)wt%TiC and its superior resistance to neutron and 3 MeV He-ion irradiations10.1016/j.jnucmat.2008.02.055 ↗
16. The change occurred in W/ZrC composite properties by using nano reactants10.1016/j.ijrmhm.2012.10.012 ↗
17. Pyo, effects of ThO2 on the solid-state sintering behavior of W–Ni–Fe alloy10.1016/j.ijrmhm.2010.08.009 ↗
18. Effect of Y2O3 addition on the microstructure, wear resistance, and corrosion behavior of W–4.9Ni–2.1Fe heavy alloy10.1007/s11665-019-04251-4 ↗
19. Refractory metal alloying: a new method for improving mechanical properties of tungsten heavy alloys10.1016/j.jallcom.2017.03.174 ↗
20. Thermoelectric properties of n-type Cu Bi2S3 materials fabricated by plasma activated sintering10.1016/j.jallcom.2018.11.343 ↗
21. Fine-grained 93W–5.6Ni–1.4Fe heavy alloys with enhanced performance prepared by spark plasma sintering10.1016/j.msea.2013.02.069 ↗
22. Consolidation of copper and aluminium powders by spark plasma sintering
23. Ultra-high temperature deformation in TaC and HfC10.1016/j.jeurceramsoc.2018.07.017 ↗
24. Microstructure and compression strength of W/HfC composites synthesized by plasma activated sintering10.1007/s12540-018-0190-8 ↗
25. Reaction sintering of HfC/W cermets with high strength and toughness10.1111/jace.12139 ↗
26. Synthesis of ODS heavy tungsten alloys through post-annealing and secondary ball milling10.1016/j.ijrmhm.2014.10.008 ↗
27. Preparation of fine-grained W–Ni–Fe alloys by using W nanopowders10.1007/s11661-020-05761-w ↗
28. Influence of micro element Hf on microstructure, mechanical properties and shielding effect of W–Ni–Fe alloy10.1016/j.jallcom.2017.07.037 ↗
29. Densification behavior of ultrafine W–Ni–Fe composite powders produced by a two-stage reduction process10.1016/j.powtec.2019.11.019 ↗
30. Wear properties of high pressure torsion processed ultrafine grained Al–7%Si alloy10.1016/j.matdes.2013.07.045 ↗
31. Influence of nanosized rare earth oxide dopant on hardness and wear resistance of 7075 aluminum alloy
32. Superhydrophobic oligoaniline-containing electroactive silica coating as pre-process coating for corrosion protection of carbon steel10.1016/j.cej.2018.02.053 ↗
33. Study on self-healing and corrosion resistance behaviors of functionalized carbon dot-intercalated graphene-based waterborne epoxy coating10.1016/j.jmst.2020.06.023 ↗
34. Superior corrosion resistance and self-healable epoxy coating pigmented with silanzied trianiline-intercalated graphene10.1016/j.carbon.2018.10.050 ↗
35. Corrosion performance of W–Ni–Cu and W–Ni–Fe alloys10.1016/S1875-5372(18)30154-1 ↗