journal article·2021-07

Revealing the microstructural evolution and mechanism during the thermomechanical treatment of polycrystalline CrCoNi medium-entropy alloy

Yu Liu, Guoai He, Yong Yang, Kai Li, Hai Gong, Bin Gan, Cheng Huang

Publisher page

Abstract

Abstract It is well-known that recrystallization plays an essential role in tuning the microstructure and grain size for obtaining favorable mechanical properties. However, the recrystallization behaviors are significantly affected by the deformation paths and post heat treatment parameters. In this paper, the recently developed CrCoNi medium-entropy alloy was compressed at 1000 °C with strain rates of 0.01/s, 0.1/s and 1/s, after which, all the compressed samples were annealed at temperatures of 650 °C, 750 °C for 0.5 h and 1 h, respectively. The evolution of grain size and local misorientation as well as annealing twin behaviors were studied in detail using the EBSD technique. A high density of annealing twin boundaries and finer equiaxed grains were obtained after the specimens deformed at slower strain rates and annealed at 750 °C/1 h, in which significant discontinuous static recrystallization occurred. The factors affecting recrystallization behaviors were qualitatively described and the corresponding mechanism of microstructural evolution was discussed in detail.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Understanding phase stability of Al–Co–Cr–Fe–Ni high entropy alloys10.1016/j.matdes.2016.07.073 ↗
3. Synergic strengthening by oxide and coherent precipitate dispersions in high-entropy alloy prepared by powder metallurgy10.1016/j.scriptamat.2018.07.034 ↗
4. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
5. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
6. Superb cryogenic strength of equiatomic CrCoNi derived from gradient hierarchical microstructure10.1016/j.jmst.2018.12.002 ↗
7. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
8. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
9. Elastic moduli and thermal expansion coefficients of medium-entropy subsystems of the CrMnFeCoNi high-entropy alloy10.1016/j.jallcom.2018.02.251 ↗
10. Polycrystalline elastic moduli of a high-entropy alloy at cryogenic temperatures10.1016/j.intermet.2014.11.005 ↗
11. The evolution of the deformation substructure in a Ni–Co–Cr equiatomic solid solution alloy10.1016/j.actamat.2017.04.033 ↗
12. Influence of annealing on microstructure and mechanical properties of a nanocrystalline CrCoNi medium-entropy alloy10.3390/ma11050662 ↗
13. Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing10.1016/j.scriptamat.2017.02.042 ↗
14. Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy10.1016/j.jallcom.2016.04.185 ↗
15. Columnar to equiaxed transition and grain refinement of cast CrCoNi medium-entropy alloy by microalloying with titanium and carbon10.1016/j.jallcom.2018.10.187 ↗
16. Deactivating deformation twinning in medium-entropy CrCoNi with small additions of aluminum and titanium10.1016/j.scriptamat.2019.11.053 ↗
17. Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co–Cr–Ni medium-entropy alloy10.1038/s41467-020-16085-z ↗
18. Effect of Al on microstructure and mechanical properties of as-cast Mg–8Gd–4Y–1Zn alloy10.1108/ACMM-10-2019-2189 ↗
19. Effects of Al addition on structural evolution and mechanical properties of the CrCoNi medium-entropy alloy10.1016/j.matchemphys.2019.121841 ↗
20. Elevated temperature microstructure evolution of a medium-entropy CrCoNi superalloy containing Al,Ti10.1016/j.jallcom.2019.152777 ↗
21. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
22. Microstructure and mechanical properties of (CrCoNi)97Al1.5Ti1.5 medium entropy alloy twisted by free-end-torsion at room and cryogenic temperatures10.1016/j.msea.2020.140101 ↗
23. Nano-precipitates strengthened non-equiatomic medium-entropy alloy with outstanding tensile properties10.1016/j.msea.2020.139218 ↗
24. Novel Si-added CrCoNi medium entropy alloys achieving the breakthrough of strength-ductility trade-off10.1016/j.matdes.2020.109202 ↗
25. Origin of strong solid solution strengthening in the CrCoNi-W medium entropy alloy10.1016/j.jmst.2020.08.058 ↗
26. Tailoring grain growth and solid solution strengthening of single-phase CrCoNi medium-entropy alloys by solute selection10.1016/j.jmst.2020.02.073 ↗
27. Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures10.1016/j.actamat.2018.12.015 ↗
28. Effect of annealing on microstructure and tensile behavior of CoCrNi medium entropy alloy processed by high-pressure torsion10.3390/e20110849 ↗
29. Strengthening CoCrNi medium-entropy alloy by tuning lattice defects10.1016/j.scriptamat.2020.07.027 ↗
30. Achieving ultrahigh strength in CoCrNi-based medium-entropy alloys with synergistic strengthening effect10.1016/j.msea.2020.139028 ↗
31. Annealing-induced hardening in high-pressure torsion processed CoCrNi medium entropy alloy10.1016/j.msea.2018.07.107 ↗
32. Design and in-situ characterization of a strong and ductile co-rich multicomponent alloy with transformation induced plasticity10.1016/j.scriptamat.2019.07.045 ↗
33. Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength10.1073/pnas.1807817115 ↗
34. Effect of annealing on the microstructure and texture of cold rolled CrCoNi medium-entropy alloy10.1016/j.intermet.2018.07.014 ↗
35. Evolution of texture during cold-rolling of a CrCoNi medium-entropy alloy10.1016/j.matpr.2019.09.084 ↗
36. Fine tuning of tensile properties in CrCoNi medium entropy alloy through cold rolling and annealing10.1016/j.intermet.2019.106578 ↗
37. Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures10.1016/j.actamat.2018.02.016 ↗
38. Gradient recrystallization to improve strength and ductility of medium-entropy alloy10.1016/j.jallcom.2020.157388 ↗
39. Heavily twinned CoCrNi medium-entropy alloy with superior strength and crack resistance10.1016/j.msea.2020.139591 ↗
40. Mechanism of grain refinement in an equiatomic medium-entropy alloy CrCoNi during hot deformation10.1016/j.jallcom.2019.152382 ↗
41. Size-dependent deformation behavior of dual-phase, nanostructured CrCoNi medium-entropy alloy10.1007/s40843-020-1377-2 ↗
42. Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy10.1016/j.ijplas.2019.08.009 ↗
43. Misorientation mapping for visualization of plastic deformation via electron back-scattered diffraction10.1017/S1431927606060120 ↗
44. Plastic strain characterization in austenitic stainless steels and nickel alloys by electron backscatter diffraction10.1016/j.jnucmat.2010.11.092 ↗
45. Spatial correlation between local misorientations and nanoindentation hardness in nickel-base alloy 69010.1016/j.msea.2016.07.123 ↗
46. Deformation twinning in polycrystalline copper at room temperature and low strain rate10.1016/j.actamat.2005.10.002 ↗
47. Microstructural and processing factors influencing the formation of annealing twins10.1016/j.msea.2009.07.021 ↗
48. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
49. Deformation twinning in Al-4.8 wt% Mg10.1016/0001-6160(88)90242-8 ↗
50. Influence of Co content on stacking fault energy in Ni–Co base disk superalloys10.1557/jmr.2011.346 ↗
51. An HREM study of the defects in ZnS
52. Formation of annealing twins in fcc crystals
53. Grain boundary ensembles due to grain growth in copper with strong recrystallization texture10.1016/S0921-5093(98)00622-4 ↗
54. Study of annealing twins in FCC metals and alloys10.1007/BF02647209 ↗
55. Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect10.1016/j.msea.2018.03.023 ↗
56. Mechanism-based strain gradient plasticity - I. Theory10.1016/S0022-5096(98)00103-3 ↗
57. Geometrically necessary dislocations and strain-gradient plasticity: A few critical issues10.1016/S1359-6462(02)00335-4 ↗
58. Measurements of grain boundary mobility during recrystallization of a single-phase aluminium alloy10.1016/S1359-6454(99)00062-2 ↗
59. Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization10.1016/S1359-6454(01)00233-6 ↗
60. Mesoscopic modeling of primary recrystallization of AA1050 with curvature-driven interface migration effect10.2320/matertrans.M2012267 ↗
61. F.J. Humphreys, M. Hatherly, Recrystallization and Related Annealing Phenomena, Second Edition, (2004) 1–628. https://doi.org/10.1016/B978–0-08–044164-1.X5000–2.10.1016/B978-008044164-1/50005-0 ↗
62. Quantifying recrystallization by electron backscatter diffraction10.1111/j.0022-2720.2004.01296.x ↗
63. Developing stable fine-grain microstructures by large strain deformation10.1098/rsta.1999.0395 ↗
64. Static recrystallization after hot deformation of α iron
65. Static recrystallization and grain growth behaviour of Al0.3CoCrFeNi high entropy alloy10.1016/j.msea.2019.03.088 ↗