journal article·2021-05

Surface tension of liquid mixtures and metal alloys. Thermodynamic conditions for the occurrence of a positive temperature coefficient

M. Soledade C.S. Santos, João Carlos R. Reis

Publisher page

Abstract

Abstract The atypical increase of surface tension when the temperature of a liquid alloy increases, is addressed using Butler’s thermodynamic model for an ideal surface phase. A rigorous expression for this temperature coefficient at fixed bulk alloy composition, requiring only pure-metal density and surface tension data and no arbitrary simplifying assumptions, is worked out. This theoretical development predicts the occurrence of positive temperature coefficients whenever a combination involving large difference of pure-metal surface tensions, temperatures close to the alloy melting point and molar surface area of the surface-active metal larger than that of the other component, is met. The proposed method is applied to the alloys Cu–Sn, Cu–In, Ag–Bi, Ag–Pb and Ag–Sn for which experimentally measured positive temperature coefficients have been reported. An acceptable agreement between theoretical and experimental values is documented. This theoretical approach predicts a negative temperature coefficient of the surface tension at fixed surface-phase composition, which is in fact the typical behaviour for this dependence. It is concluded that the temperature and composition ranges over which a certain binary alloy may exhibit positive temperature coefficient of the surface tension can be established beforehand using the proposed methodology.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermodynamic and Structural Properties of Metals and Alloys · nanoparticles nucleation surface interactions · Chemical Thermodynamics and Molecular Structure

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Some issues in liquid metals research10.3390/met5042128 ↗
2. Surface tension of binary metal–surface active solute systems under conditions relevant to welding metallurgy10.1007/BF02657748 ↗
3. Untypical surface properties of aqueous solutions of 1,5-pentanediol10.1016/S0927-7757(99)00207-1 ↗
4. Surface tension of dilute alcohol–aqueous binary fluids: n-butanol/water, n-pentanol/water, and n-hexanol/water solutions10.1007/s00231-017-1976-9 ↗
5. The thermodynamics of the surfaces of solutions10.1098/rspa.1932.0040 ↗
6. Application of thermodynamic databases to the evaluation of surface tensions of molten alloys, salt mixtures and oxide mixtures
7. Surface tension of liquid metals and alloys – recent developments10.1016/j.cis.2010.06.009 ↗
8. A method to calculate equilibrium surface transition lines in monotectic systems10.1016/j.calphad.2005.04.004 ↗
9. Calculation of surface tension and surface phase transition line in Ga–Tl system10.1016/j.msea.2007.10.111 ↗
10. Improved derivation of the Butler equations for surface tension of solutions10.1021/acs.langmuir.9b01892 ↗
11. Variation de la tension superficielle d’alliages métaliques liquide avec la temperature10.1051/jcp/1974710559 ↗
12. Surface tension temperature coefficient of liquid alloys and definition of a “zero Marangoni number alloy” for crystallization experiments in microgravity environment10.1016/0094-5765(81)90095-3 ↗
13. Temperature dependent surface tension of binary alloys: a simple model
14. The surface tension of binary alloys: simple models for complex phenomena10.1007/s10765-005-6675-y ↗
15. Theoretical calculation of surface tension and its temperature coefficient associated with Cu–Ti alloys10.1080/14786435.2018.1492751 ↗
16. Surface tension and its temperature coefficient of liquid Sn-X (X˭Ag, Cu) alloys10.2320/matertrans.45.2864 ↗
17. Surface tension and wetting behaviour of molten Cu–Sn alloys10.1016/j.jallcom.2007.01.178 ↗
18. Surface tension and density of liquid Sn–Cu alloys10.1016/j.apsusc.2010.07.013 ↗
19. Surface tension and density of Cu–Ag, Cu–In and Ag–In alloys
20. Oberflächenspannungsmessungen VII Über die Temperaturabhängigkeit der Oberflächenspannung von Kupfer und die Oberflächenspannung von schmelzflüssigen Silber-Blei-, Silber-Wismut- und Kupter-Blei-Legierungen10.1515/zpch-1959-21102 ↗
21. The surface tension and density of liquid Ag–Bi, Ag–Sn, and Bi–Sn alloys10.1007/s00706-005-0393-9 ↗
22. Détermination de la tension superficielle des alliages Ag–Pb et Cu–Pb par la méthode da la goute posée10.1051/jcp/1973701290 ↗
23. Surface tension of liquid Ag-Sn alloys: experiment versus modeling10.1361/105497101770338734 ↗
24. Temperature dependence of surface tension of liquid Sn–Ag, In–Ag and In–Cu alloys10.1088/0957-0233/16/2/015 ↗
25. Surface tension and density of liquid Sn–Ag alloys10.1016/j.apsusc.2010.11.002 ↗
26. Temperature dependence of surface tension of Sn-Ag alloys10.1007/s11665-013-0858-7 ↗
27. Experimental and theoretical study of the surface tension in liquid Ag–Cu–Sn alloys10.1007/s00706-005-0378-8 ↗
28. Surface tension and density in liquid Ag–Cu–Sn alloys10.1016/j.jnoncrysol.2007.05.136 ↗
29. Surface tension and density of liquid Sn–Ag–Cu alloys10.3139/146.110819 ↗
30. Temperature dependences of surface tension, density and viscosity study of Sn–Ag–Cu with Bi additions using theoretical models10.1038/s41598-019-50698-9 ↗
31. The surface tension and density of Ag–Bi–Sn alloys10.3139/146.101619 ↗
32. Surface properties and wetting characteristics of liquid Ag–Bi–Sn alloys10.1007/s00706-012-0757-x ↗
33. A coherent set of model equations for various surface and interface energies in systems with liquid and solid metals and alloys10.1016/j.cis.2020.102212 ↗
34. Statistical surface thermodynamics of simple liquid mixtures10.1002/aic.690100520 ↗
35. Reference data for the density and viscosity of liquid copper and liquid tin10.1063/1.3467496 ↗
36. Surface tension and density of liquid gold, silver, and tin
37. The density of liquid lead from the melting point to the normal boiling point10.1016/0022-1902(61)80226-1 ↗
38. The surface tension of binary liquid mixtures: lead + tin and lead + indium alloys10.1039/tf9575300315 ↗
39. Adsorption of Et3N and Bu3N in toluene on AgI, in the very dilute region. Surface models and cross-sectional areas10.1021/jp980891l ↗
40. New thermodynamics for evaluating the surface-phase enrichment in the lower surface tension component10.1002/cphc.201402100 ↗
41. What happens when the surface and bulk phases of liquid metal alloys attain the same density at equilibrium?
42. A unified model for the cohesive energy, critical temperature, surface tension and volume thermal expansion coefficient of liquid metals of bcc, fcc and hcp crystals10.1016/j.msea.2007.10.112 ↗
43. Surface tension and thermodynamic properties of liquid Ag-Bi solutions10.1007/s11669-003-0005-5 ↗
44. Shape and curvature of surface tension isotherms for liquid mixtures10.1016/j.colsurfa.2017.01.013 ↗
45. Surface tension of compound forming liquid binary alloys: a simple model10.1023/B:JMSC.0000043610.33135.f4 ↗
46. Physical properties of liquid metals [IV] surface tension and electronic transport properties of liquid metals10.1080/09507119409548692 ↗
47. Influence of oxygen contamination on the surface tension of liquid tin10.1007/BF00581083 ↗
48. On the thermodynamics of surface systems
49. Anomalous temperature dependence of the surface tension in liquid silver–lead alloys10.1016/j.jallcom.2007.01.186 ↗