Fabrication of an IPL-sintered Cu circuit and its electrochemical migration behavior
Source abstract
Abstract
Abstract Problems associated with the oxidation of Cu nanopaste have been widely studied in efforts to develop a replacement for Ag nanopaste. The intensive pulsed light (IPL) sintering process has been suggested to solve the oxidation problem because it is a method with a short processing time and is conducted at room temperature. Cu nanopaste was fabricated with Cu nanoparticles and a functional organic matrix. Cu nanopaste screen-printed onto a polyethylene terephthalate substrate was subjected to various IPL sintering conditions, and the effects of pulse power and pulse width on the microstructure, electrical resistivity, and electrochemical migration behavior of the printed Cu patterns were investigated. The electrical properties of the Cu patterns improved with increasing pulse power and pulse width because organic residues were removed by the IPL energy. The electrical properties of the Cu patterns improved with increasing pulse power and pulse width because organic residues were removed by the IPL energy. The electrochemical migration behavior was varied because of leaked ethylene glycol from organic matrix. The dendrites from lower pulse condition has finer microstructure and increased nucleation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Thin-Film Transistor Technologies · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. A new frontier of printed electronics: flexible hybrid electronics10.1002/adma.201905279 ↗
2. Fluorinated graphene suspension for flexible and printed electronics: flakes, 2D films, and heterostructures10.1016/j.matdes.2018.11.061 ↗
3. Low temperature sintering nano-silver conductive ink printed oncotton fabric as printed electronics10.1016/j.porgcoat.2016.08.019 ↗
4. Roll-to-roll infrared and hot-air sintering of gravure-printed Ag layer based on in situ tension measuring and analysis10.1039/C6TC02464E ↗
5. Intense pulsed light sintering of Cu nano particles/micro particles-ink assisted with heating and vacuum holding of substrate for warpage free printed electronic circuit10.1016/j.tsf.2019.02.020 ↗
6. Highly durable Cu-based electrodes from a printable nanoparticle mixture ink: flash-lightsintered, kinetically-controlled microstructure10.1039/C8NR00200B ↗
7. In situ fabrication of copper electrodes on carbon-fiber-reinforced polymer (CFRP) for damage monitoring by printing and flash light sintering10.1016/j.compscitech.2017.02.011 ↗
8. Novel copper particle paste with self-reduction and self-protection characteristics for die attachment of power semiconductor under a nitrogen atmosphere10.1016/j.matdes.2018.11.003 ↗
9. Submicron Ag-coated Cu particles and characterization methods to evaluate their quality10.1016/j.jallcom.2016.08.009 ↗
10. Comparative studies on thermal and laser sintering for highly conductive Cu films printable on plastic substrate10.1016/j.tsf.2011.11.078 ↗
11. Transversally extended laser plasmonic welding for oxidation-free copper fabrication toward high-fidelity optoelectronics10.1021/acs.chemmater.6b00013 ↗
12. Oxide-free copper pastes for the attachment of large-area power devices10.1007/s11664-019-07452-8 ↗
13. Oxidation-resistant metallized nanofibers as transparent conducting films and heaters10.1016/j.actamat.2017.09.068 ↗
14. High-viscosity copper paste patterning and application to thin-film transistors using electrohydrodynamic jet printing10.1002/adem.201901384 ↗
15. Electromechanical properties of printed copper ink film using a white flash light annealing process for flexible electronics10.1016/j.microrel.2014.12.015 ↗
16. Application of flash-light sintering method to flexible inkjet printing using anti-oxidant copper nanoparticles10.1016/j.tsf.2018.04.034 ↗
17. Printed highly conductive Cu films with strong adhesion enabled by low-energy photonic sintering on low-Tg flexible plastic substrate10.1088/1361-6528/28/3/035203 ↗
18. Printable thick copper conductors from optically modulated multidimensional particle mixtures10.1021/acsami.9b01855 ↗
19. In situ monitoring of a flash light sintering process using silver nano-ink for producing flexible electronics10.1088/0957-4484/24/3/035202 ↗
20. On the self-damping nature of densification in photonic sintering of nanoparticles10.1038/srep14845 ↗
21. S.J. Joo, H.J. Hwang, H.S. Kim, Highly conductive copper nano/ microparticles ink via flash light sintering for printed electronics.
22. M. Dexter, R. Bhandari, C.H. Chang, R. Malhotra, Controlling processing temperatures and selflimiting behaviour in intense pulsed sintering by tailoring nanomaterial shape distribution.
23. Intense pulse light sintering of an Ag microparticle-based, highly stretchable, and conductive electrode10.1016/j.mee.2019.111012 ↗
24. Formulation of screen-printable Cu molecular ink for conductive/flexible/solderable Cu traces10.1021/acsami.9b08854 ↗
25. Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices10.1039/C4TC01820F ↗
26. Cu Ion ink for a flexible substrate and highly conductive patterning by intensive pulsed light sintering10.1021/am303268k ↗
27. Test methods for electrochemical migration: a review10.1007/s10854-016-5713-9 ↗
28. Pulsed light sintering characteristics of inkjet-printed nanosilver films on a polymer substrate10.1088/0960-1317/21/12/125023 ↗
29. Fabrication and characterization of Ag flake hybrid circuits with IPL-sintering10.1016/j.jmst.2020.01.068 ↗
30. Green manufacturing of highly conductive Cu2O and Cu nanoparticles for photonic-sintered printed electronics10.1021/acsaelm.9b00444 ↗
31. Photonic welding of ultra-long copper nanowire network for flexible transparent electrodes using white flash light sintering10.1039/C5RA25548A ↗
32. Development of a via-hole connection process via intense pulsed light sintering with Cu micro/Ag nano-hybrid ink for a multi-layered flexible printed circuit board10.1016/j.tsf.2019.04.015 ↗
33. Ultrahigh conductivity and superior interfacial adhesion of a nanostructured, photonic-sintered copper membrane for printed flexible hybrid electronics10.1021/acsami.8b17164 ↗
34. Fabrication of IPL-Sintered Ag-MWCNT composite circuits and their flexibility characteristics10.1016/j.jallcom.2019.04.292 ↗
35. Electrochemical migration of fine-pitch nanopaste Ag interconnects10.1007/s11664-016-5000-9 ↗
36. Method for mitigating electrochemical migration on printed circuit boards10.1007/s11664-019-07300-9 ↗
37. Roles of palladium particles in enhancing the electrochemical migration resistance of sintered nano-silver paste as a bonding material10.1016/j.matlet.2017.06.066 ↗
38. Copper electrochemical migration growth in an air HAST
39. The effect of organic additives for the prevention of copper electrochemical migration10.1016/j.jelechem.2018.10.031 ↗