journal article·2021-03

Correlation between lithium-ion accessibility to the electrolyte–active material interface and low-temperature electrochemical performance

Jun Hui Jeong, Min Ju O, Kwang Chul Roh

Publisher page

Abstract

Abstract With continuous growth in the demand for energy storage, batteries are increasingly required to operate under extreme environmental conditions, including low temperatures. In this study, we systematically investigate the correlation between lithium-ion accessibility to the electrolyte–active material interface and the low-temperature electrochemical properties of electrode materials. Holey graphene with different number densities of in-plane defects on the graphene basal plane is synthesized and employed for the synthesis of Li4Ti5O12/holey graphene composites. The electrochemical performances of the Li4Ti5O12/holey graphene composites are evaluated at operating temperatures of –25 to 50 °C. As the number density of in-plane defects in the holey graphene increased, the polarization decreased and the apparent lithium-ion diffusion coefficient increased at operating temperatures of –25, 0, and 25 °C, resulting in improved low-temperature electrochemical performance. Based on the comparative analysis of the electrochemical properties of the Li4Ti5O12/holey graphene composites, the introduction of in-plane defects in the carbon layer is an effective strategy for improving the low-temperature electrochemical performance of electrode materials. The results suggest that the lithium-ion accessibility to the electrolyte–active material interface becomes more important to the electrochemical properties at low operating temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: a review
2. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
3. Silicon based lithium-ion battery anodes: a chronicle perspective review10.1016/j.nanoen.2016.11.013 ↗
4. Lithium and lithium ion batteries for applications in microelectronic devices: a review10.1016/j.jpowsour.2015.03.164 ↗
5. Temperature dependent electrochemical performance of graphite anodes for K-ion and Li-ion batteries10.1016/j.jpowsour.2018.11.007 ↗
6. Distinct nanoscale interphases and morphology of lithium metal electrodes operating at low temperatures10.1021/acs.nanolett.9b03330 ↗
7. Carbon‐nanotube‐decorated nano‐LiFePO4@ C cathode material with superior high‐rate and low‐temperature performances for lithium‐ion batteries10.1002/aenm.201300159 ↗
8. Synthesis of pristine and carbon-coated Li4Ti5O12 and their low-temperature electrochemical performance10.1016/j.jpowsour.2010.02.020 ↗
9. Ac impedance analysis of lithium ion battery under temperature control10.1016/j.jpowsour.2012.05.095 ↗
10. Inhomogeneous degradation of graphite anodes in automotive lithium ion batteries under low-temperature pulse cycling conditions10.1016/j.jpowsour.2016.01.033 ↗
11. Thermal management performance of phase change materials with different thermal conductivities for Li-ion battery packs operated at low temperatures10.1016/j.energy.2017.12.098 ↗
12. Warming‐up effects of phase change materials on lithium‐ion batteries operated at low temperatures10.1002/ente.201600083 ↗
13. Effect of testing temperature on the electrochemical properties of Li (Ni0.6Mn0.2Co0.2)O2 and its Ti3C2 (OH)2 modification as cathode materials for lithium-ion batteries10.1016/j.jallcom.2019.07.027 ↗
14. Battery materials for ultrafast charging and discharging10.1038/nature07853 ↗
15. Structural optimization of 3D porous electrodes for high-rate performance lithium ion batteries10.1021/nn505490u ↗
16. Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance10.1038/ncomms12122 ↗
17. Estimation of state of health of lithium-ion batteries based on charge transfer resistance considering different temperature and state of charge10.1016/j.est.2018.11.020 ↗
18. Amorphous carbon-coated TiO2 nanocrystals for improved lithium-ion battery and photocatalytic performance10.1016/j.nanoen.2014.03.012 ↗
19. Coating of graphite anode with coal tar pitch as an effective precursor for enhancing the rate performance in Li-ion batteries: effects of composition and softening points of coal tar pitch10.1016/j.carbon.2015.07.030 ↗
20. Single-layer graphene-wrapped Li4Ti5O12 anode with superior lithium storage capability10.1016/j.carbon.2016.12.022 ↗
21. Cyclability study of silicon–carbon composite anodes for lithium-ion batteries using electrochemical impedance spectroscopy10.1016/j.electacta.2011.02.014 ↗
22. A high surface area N-doped holey graphene aerogel with low charge transfer resistance as high performance electrode of non-flammable thermostable supercapacitors10.1016/j.carbon.2019.04.070 ↗
23. Nanostructured electrode materials for high-energy rechargeable Li, Na and Zn batteries10.1021/acs.chemmater.7b03839 ↗
24. Nanostructured TiO2–based anode materials for high‐performance rechargeable lithium‐ion batteries10.1002/cnma.201600093 ↗
25. Micro/nanostructured materials for sodium ion batteries and capacitors
26. LiFePO4 nanoparticles embedded in a nanoporous carbon matrix: superior cathode material for electrochemical energy‐storage devices10.1002/adma.200802998 ↗
27. Donut‐shaped Li4Ti5O12 structures as a high performance anode material for lithium ion batteries10.1002/smll.201303894 ↗
28. Research progress on silicon/carbon composite anode materials for lithium-ion battery10.1016/j.jechem.2017.12.012 ↗
29. A hierarchical porous C@ LiFePO4/carbon nanotubes microsphere composite for high‐rate lithium‐ion batteries: combined experimental and theoretical study10.1002/aenm.201600426 ↗
30. Re-synthesis of nano-structured LiFePO4/graphene composite derived from spent lithium-ion battery for booming electric vehicle application10.1016/j.jpowsour.2019.02.065 ↗
31. Si@ SnS2–reduced graphene oxide composite anodes for high‐capacity lithium‐ion batteries10.1002/cssc.201902839 ↗
32. Nanosheet-assembled hierarchical Li4Ti5O12 microspheres for high-volumetric-density and high-rate Li-ion battery anode
33. Hierarchical carbon-coated acanthosphere-like Li4Ti5O12 microspheres for high-power lithium-ion batteries10.1016/j.jpowsour.2016.02.084 ↗
34. Hierarchically structured lithium titanate for ultrafast charging in long-life high capacity batteries10.1038/ncomms15636 ↗
35. Synthesis of three-dimensional nanoporous Li-rich layered cathode oxides for high volumetric and power energy density lithium-ion batteries10.1021/acsami.6b14169 ↗
36. A three-dimensional porous LiFePO4 cathode material modified with a nitrogen-doped graphene aerogel for high-power lithium ion batteries10.1039/C4EE03825H ↗
37. Facile synthesis of carbon-coated spinel Li4Ti5O12/rutile-TiO2 composites as an improved anode material in full lithium-ion batteries with LiFePO4@ N-doped carbon cathode10.1021/acsami.6b15982 ↗
38. Vesicular Li3V2(PO4)3/C hollow mesoporous microspheres as an efficient cathode material for lithium-ion batteries10.1007/s12274-019-2461-1 ↗
39. Synthesis of Co3O4/nitrogen-doped carbon composite from metal-organic framework as anode for Li-ion battery10.1016/j.jallcom.2018.10.129 ↗
40. Graphene-based composites for electrochemical energy storage
41. Application of graphene in energy storage device – a review10.1016/j.rser.2020.110026 ↗
42. Effective wrapping of graphene on individual Li4Ti5O12 grains for high-rate Li-ion batteries10.1039/C3TA14347C ↗
43. Confined synthesis of graphene wrapped LiMn0.5Fe0.5PO4 composite via two step solution phase method as high performance cathode for Li-ion batteries10.1016/j.jpowsour.2016.06.108 ↗
44. Comparing the performance of Nb2O5 composites with reduced graphene oxide and amorphous carbon in Li‐and Na‐ion electrochemical storage devices10.1002/celc.202000181 ↗
45. Rational design of oxide/carbon composites to achieve superior rate-capability via enhanced lithium-ion transport across carbon to oxide10.1039/C8TA00883C ↗
46. Temperature dependence of the Raman spectra of graphene and graphene multilayers10.1021/nl071033g ↗
47. Multimodal porous carbon derived from ionic liquids: correlation between pore sizes and ionic clusters10.1039/C7NR05647H ↗
48. Phase transformation of spinel Li4Ti5O12 to anatase TiO2 by catalytic delithiation
49. High power Nb-doped LiFePO4 Li-ion battery cathodes; pilot-scale synthesis and electrochemical properties10.1016/j.jpowsour.2016.06.128 ↗