Corrosive behavior of multi-phased quasicrystal alloys
Source abstract
Abstract
Abstract Six quasicrystal alloys were created by varying their composition and subsequent microstructure. The corrosion of those quasicrystal alloys was investigated in an artificial seawater (3.5% NaCl solution) environment. These samples were tested in electrochemical experiments to obtain a current density and a corrosion rate. The results revealed that chemical composition and microstructure determined the corrosive behaviors of quasicrystal alloys. Specifically, Fe-based λ-phase showed pitting corrosion; while Cu-based β-phase and icosahedral-phase exhibited corrosion resistance. In the case of multi-phased alloys consisting of quasicrystal, they showed various corrosive behaviors according to the combination of phases. The alloys with λ-phase led to the higher current density and corrosion rate displaying pitting, galvanic, intergranular, and crevice corrosion. Meanwhile, the alloys with i-phase produced the lower current density and corrosion rate, presenting only weak galvanic and crevice corrosion. Additionally, higher concentrations of i-phase improve the corrosion resistance of multi-phase quasicrystal alloys. The understanding of corrosion mechanisms in quasicrystal alloys will open the way for the development of metal alloys that can be used in marine conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quasicrystal Structures and Properties · Mineralogy and Gemology Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Belin-Ferré · 2000
2. Quasicrystals: Structure and Physical Properties
3. Dubois · 2005
4. Plastic deformation of quasi-crystalline and crystalline phases in AlCuFe alloys
5. Microstructure, fabrication and properties of quasicrystalline Al-Cu-Fe alloys: a review
6. Corrosion and oxidation behavior of amorphous and nanoquasicrystalline phases in Zr70Pd30 and Zr80Pt20 alloys
7. Initial oxidation of AlPdMn quasicrystals - a study by high-resolution RBS and ERDA
8. Initial oxidation of quasicrystals – an investigation by high-resolution RBS and ERDA
9. Investigation of quaternary Al-based quasicrystal thin films for corrosion protection
10. Corrosion behavior of as-cast Mg68Zn28Y4 alloy with I-phase
11. Corrosion behavior of vacuum plasma sprayed Ti-Zr-Ni quasicrystal coatings
12. The effect of doping on the corrosion behavior of quasi-crystalline alloys in the Al-Cu-Fe-Cr system
13. Effects of Mg-Zn-Y quasicrystal addition on the microstructures, mechanical performances and corrosion behaviors of as-cast AM60 magnesium alloy
14. Electrochemical behavior of approximant phases in the Al-(Cu)-Fe-Cr system
15. Electrochemical behavior of low-pressure plasma-sprayed Al-Cu-Fe-Cr quasicrystalline coating
16. Electrochemical hydrogen storage properties of Ti1.4V0.6Ni alloy comprising quasicrystal coating with Cu
17. Microstructure and corrosion behavior of rapidly solidified Mg-Zn-Y alloys
18. Laser welding introduced segregation and its influence on the corrosion behaviour of Al-Cu-Li alloy
19. Polarisation behaviour of the Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 alloy in different microstructural states in acid solutions
20. Tribological and corrosion behavior of vacuum plasma sprayed Ti-Zr-Ni quasicrystalline coatings
21. Comparative study on the corrosion resistance of Al-Cr-Fe alloy containing quasicrystals and pure Al
22. Fabrication and corrosion resistance of Mg-Zn-Y-based nano-quasicrystals alloys
23. Hot corrosion of AlCuFeCr quasicrystalline coating on titanium alloys with NaCl deposit
24. Effects of microstructure of quasicrystal alloys on their mechanical and tribological performance
25. Multi-phase quasicrystalline alloys for superior wear resistance
26. Analysis solution method for 3D planar crack problems of two-dimensional hexagonal quasicrystals with thermal effects
27. Fracture analysis of an infinite 1D hexagonal piezoelectric quasicrystal plate with a penny-shaped dielectric crack
28. Friction and wear behavior of as-cast Mg–Zn–Y quasicrystal materials
29. Fundamental solutions and analysis of the interface crack for two-dimensional decagonal quasicrystal bimaterial via the displacement discontinuity method
30. Gradient theory for crack problems in quasicrystals
31. Corrosion behavior of Al-Cu-Fe quasicrystals
32. Corrosion behaviour of Al-Cu-Fe alloys containing a quasicrystalline phase
33. Corrosion of Al-Cu-Fe quasicrystals and related crystalline phases
34. Fabrication of quasicrystalline coatings: a review
35. Wear-life analysis of deep groove ball bearings based on Archard wear theory
36. Material removal analysis for compliant polishing tool using adaptive meshing technique and Archard wear model
37. Design of quasicrystal alloys with favorable tribological performance in view of microstructure and mechanical properties