Bio-synthesis of SnO2 and comparison its CO sensing performance with conventional processes
Source abstract
Abstract
Abstract The present paper reports on a unique eco-friendly bio-synthesis process of tin oxide using water extract of soaked kabuli chickpea seeds as natural binder. The structural, microstructural and CO sensing properties of the newly synthesized tin oxide were compared with those of conventional sol–gel and sonochemical processes. XRD results of the bio-synthesized material revealed the formation of single tetragonal phase of SnO2 similar to sol–gel and sonochemical processes. The bio approach led to the formation of finer nanoparticales with a higher specific surface area ∼ 60 m2 /gm compared to the others. The average sizes of tin oxide nanoparticles as observed from TEM images were about 35 nm, 15 and 6 nm for the sonochemical, sol-gel and biosynthesis respectively. These tin oxide powders were used to fabricate Taguchi based sensors and their CO sensing performance were evaluated. The biosynthesized tin oxide sensor showed ∼53% sensing performance for 30 ppm CO which was better than sol-gel (∼44%) or sonochemical (∼42%) tin oxides operating at similar condition. The reported results suggest that the biosynthesis is a promising cost effective method to prepare nanocrystalline SnO2 for sensing application.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Tin oxide nanostructured materials: an overview of recent developments in synthesis, modifications and potential applications10.1039/C6RA21444D ↗
2. Gas-sensing properties of sensors based on single crystallineSnO2 nanorods prepared by a simple molten-salt method10.1016/j.snb.2005.11.022 ↗
3. Preparation of SnO2 nanoparticles andnanorods by using a hydrothermal method at low temperature10.1016/j.matlet.2007.10.004 ↗
4. Structure of SnO2 nanoparticles by sol–gel method10.1016/j.matlet.2012.01.073 ↗
5. Microwave-assisted synthesis and investigation of SnO2 nanoparticles10.1016/j.matlet.2009.01.032 ↗
6. Characterization of SnO2 nanowires synthesized from SnO by carbothermal reduction process10.1016/j.ceramint.2007.09.092 ↗
7. Sonochemical synthesis of mesoporous tin oxide10.1021/la015761+ ↗
8. New high-energy-density GeTe-based anodes for Li-Ion Batteries10.1039/C8TA12094C ↗
9. Conductive copper niobate: superior Li+-storage capability and novel Li+-transport mechanism
10. MoNb12O33 as a new anode material for high capacity, safe, rapid and durable Li+ storage: structural characteristics, electrochemical properties and working mechanisms10.1039/C9TA00309F ↗
11. New anode material for lithium-ion batteries: aluminum Niobate (AlNb11O29)10.1021/acsami.8b20246 ↗
12. Green biosynthesis and characterization of magnetic iron oxide (Fe3O4) nanoparticles using seaweed (Sargassum muticum) aqueous extract10.3390/molecules18055954 ↗
13. Green synthesis of ZnO nanoparticles by calotropis gigantea
14. Biosynthesis of titanium dioxide nanoparticles using bacterium Bacillus subtilis10.1016/j.matlet.2011.05.077 ↗
15. Biologically produced silver–carbon composite materials for optically functional thin-film coatings10.1002/(SICI)1521-4095(200003)12:6<407::AID-ADMA407>3.0.CO;2-O ↗
16. Bio-green synthesis of Ni-doped tin oxide nanoparticles and its influence on gas sensing properties10.1039/C5RA13513C ↗
17. NO2 sensing studies of bio-green synthesized Au-doped SnO210.1007/s10854-017-7156-3 ↗
18. Pd impregnated gallia : tin oxide nanocomposite - an excellent high temperature carbon monoxide sensor10.1016/j.snb.2017.07.094 ↗
19. Changes in molecular structure of chickpea starch during processing treatments: a thin layer chromatography study10.1016/j.foodchem.2017.09.096 ↗
20. Preparation of nanostructured tin oxide using a sol-gel process based on tin tetrachloride and ethylene glycol10.1023/A:1004685907751 ↗
21. SnO2: a comprehensive review on structures and gas sensors10.1016/j.pmatsci.2014.06.003 ↗
22. Synthesis and luminescence properties of SnO2 nanoparticles10.1016/S0009-2614(03)00440-8 ↗
23. Correlations among size, defects, and photoluminescence in ZnO nanoparticles10.1063/1.2424538 ↗
24. Low operating temperature CO sensor prepared using SnO2nanoparticles
25. Finely tuned SnO2 nanoparticles for efficient detection of reducing and oxidizing gases: the influence of alkali metal cation on gas-sensing properties10.1021/acsami.7b18140 ↗
26. SnO2 highly sensitive CO gas sensor based on Quasi-Molecular-Imprinting Mechanism Design10.3390/s150203789 ↗
27. Occurrence of non-equilibrium orthorhombic SnO2 phase and its effect in preferentially grown SnO2 nanowires for CO detection10.1039/C4RA15539D ↗
28. Highly sensitive and fast responding CO sensor using SnO2 nanosheets10.1016/j.snb.2007.12.040 ↗
29. Synthesis of monodispersed SnO2 nanocrystals and their remarkably high sensitivity to volatile organic compounds10.1021/cm100228d ↗
30. Large-scale fabrication of highly sensitive SnO2 nanowire network gas sensors by single step vapor phase growth10.1016/j.snb.2012.02.022 ↗
31. Facile control of C2H5OH sensing characteristics by decorating discrete Ag nanoclusters on SnO2 nanowire networks10.1021/am200647f ↗
32. Enhanced performance of SnO2 nanowires ethanol sensor by functionalizing with La2O310.1016/j.snb.2008.02.018 ↗
33. Analytical method committee, Recommendations for the definition, estimation and use of the detection limit10.1039/an9871200199 ↗
34. New insights towards strikingly improved room temperature ethanol sensing properties of p-type Ce-doped SnO2 sensors10.1038/s41598-018-26504-3 ↗
35. The role of morphology and crystallographic structure of metal oxides in response of conductometric-type gassensors10.1016/j.mser.2008.02.001 ↗