journal article·2018-11

Phase composition and formation mechanisms of a high-velocity electric arc-sprayed FeNiCrAl coating

Haoliang Tian, Changliang Wang, Mengqiu Guo, Zhihui Tang, Shicheng Wei, Binshi Xu

Publisher page

Abstract

Abstract FeNiCrAl coatings are wear-resistant and are applied as surface protectants for mechanical parts. The phase composition of a coating strongly impacts its performance; therefore, the internal phase composition and formation mechanisms of FeNiCrAl coatings need to be studied in detail. In this study, a FeNiCrAl coating was prepared using high-velocity arc spraying, and an X-ray diffraction (XRD) analysis of the coating revealed the coexistence of α- and γ-Fe phases, Fe-Al and Ni-Al intermetallic compounds, a Cr0.19Fe0.1Ni0.11Al0.17 solid solution phase, FeO, Fe2B and (Fe, Cr)3C. The FeNiCrAl coating microstructure and phase formation mechanisms were analysed by transmission electron microscopy. The coating consisted of many nanograins and micrograins with diameters of
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Basic approach and developmental foreground study of resource recovery for used electromechanic products
2. The effects of annealing treatment on microstructure and contact resistance properties of cold sprayed Ag-SnO2 coating10.1016/j.jallcom.2017.04.227 ↗
3. Corrosion resistance of vacuum re-melted Ni60-NiCrMoY alloy coatings10.1016/j.jallcom.2017.03.318 ↗
4. In-situ synthesis of novel Al-Fe-Si metallic glass coating by arc spraying10.1016/j.jallcom.2017.05.032 ↗
5. Influence of Cr element on abrasive wearing of arc spraying TiB2 coatings
6. Study on iron base arc spraying cored wire with TiC ceramic powders
7. Abrasive wear analysis using factorial experiment design10.1016/S0043-1648(03)00103-0 ↗
8. Preparation and properties of micro-arc oxidation self-lubricating composite coatings containing paraffin10.1016/j.jallcom.2017.05.138 ↗
9. Research and design of composite coatings applied in remanufacturing crankshaft by high velocity arc spraying
10. Properties of FeCrAl/Ni95Al coating by high velocity arc spraying
11. Microstructural stability and phase transformations in electrodeposited cobalt-phosphorus coatings10.1016/j.jallcom.2017.05.152 ↗
12. Diffusion of aluminum in nanocrystalline iron at lower temperature
13. Effects of loads on friction–wear properties of HVOF sprayed NiCrBSi alloy coatings by laser remelting10.1016/j.jallcom.2017.02.171 ↗
14. A comparative investigation on bi-layer Al–Cr/Al–Si coating and mono-layer Al–Cr–Si coating synthesized on Ti–6Al–4V alloy substrate by mechanical alloying method10.1016/j.jallcom.2017.03.082 ↗
15. Synthesis of the Ni-Al coatings on different metallic substrates by mechanical alloying and subsequent laser treatment10.1016/j.jallcom.2016.11.189 ↗
16. Microstructure and corrosion behavior of Fe-based amorphous coating prepared by HVOF10.1016/j.jallcom.2017.06.046 ↗
17. High temperature oxidation and insulation behavior of plasma-sprayed nanostructured thermal barrier coatings10.1016/j.jallcom.2017.02.073 ↗
18. Thermal spraying of transition metal aluminides: an overview10.1016/j.intermet.2012.01.020 ↗
19. Wang · 2003