Study on structure and properties of low carbon spinel-C refractory composites
Source abstract
Abstract
Abstract The formation mechanism (gas-gas, gas-solid) of magnesia-alumina spinel was investigated under carbon-containing atmosphere. Meanwhile, the influence of in-situ spinel formation and additives on structure and properties of low carbon spinel-C was researched. Mg(g) was formed by carbon thermal reaction which reacted with alumina (gas-solid) and Al2O(g) (gas-gas). The presence of carbon promoted the formation of spinel by gas-phase reaction. Spinel of in-situ formation strongly improved strength performance, thermal shock resistance and slag corrosion resistance of low carbon spinel-C materials. The addition of superfine graphite and expanded graphite was beneficial to thermal shock and room/high temperature flexure strength respectively. Al-Si alloy and B4C worked together obviously improving flexure strength of spinel-C materials in a wide temperature range. The synergistic interaction of Al-Si and B4C provided the higher oxidation resistance for low carbon spinel-C materials than that of single component. Si powder significantly improved thermal shock resistance for all spinel-C samples. However, the excessive Si powder was adverse to slag corrosion resistance. So the magnesia and α-Al2O3 were added which obviously enhanced slag corrosion resistance of low carbon (8% graphite) spinel-C materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Development of functional refractory for steel continuous casting
2. Status and developing trend of functional refractories for continuous casting
3. Corrosion behavior of Al2O3-C refractories with casting mould meniscus slags at 1550 °C10.1002/srin.201400590 ↗
4. Fundamental investigations on the corrosion of ZrO2-C refractories during interaction with a casting mould meniscus slag10.1002/srin.201300336 ↗
5. Nano carbon containing MgO-C refractory: effect of graphite content10.1016/j.ceramint.2012.02.082 ↗
6. Microstructures and mechanical properties of Al2O3-C refractories with addition of microcrystalline graphite10.1016/j.ceramint.2014.03.139 ↗
7. Microstructure and mechanical properties of low-carbon MgO–C refractories bonded by an Fe nanosheet-modified phenol resin10.1016/j.ceramint.2014.09.091 ↗
8. Singh · 2014
9. Nanostructured cementitious sol gel coating on graphite for application in monolithic refractory composites10.1016/j.ceramint.2011.09.006 ↗
10. Analysis on microcrystalline graphite and properties of MgO-C refractories with microcrystalline graphite10.1179/1743676115Y.0000000017 ↗
11. Fabrication and properties of MgO-C refractories improved with expanded graphite10.1016/j.ceramint.2014.08.007 ↗
12. Oxidation resistance and microstructural evolution in MgO-C refractories with expanded graphite10.1016/j.ceramint.2016.01.169 ↗
13. Influence of bonding carbon on low carbon Al2O3-C refractory composites10.1016/j.ceramint.2017.06.182 ↗
14. Oxidation protection of MgO–C refractories by means of Al8B4C710.1111/j.1151-2916.2001.tb00701.x ↗
15. Thermochemistry and microstructures of MgO&C refractories containing various antioxidants10.1016/S0955-2219(00)00308-3 ↗
16. Oxidation protection of MgO-C monolithic refractories with tar-resin binder and metal antioxidants
17. Effect of additives and carbon resources on thermal shock resistance of spinel-C material10.4028/www.scientific.net/KEM.726.440 ↗
18. Formation of hollow MgO-rich spinel whiskers in low carbon MgO-C refractories with Al additives10.1016/j.jeurceramsoc.2014.07.028 ↗
19. Thermomechanical behaviour of Al2O3-MgO-C refractories under non-oxidizing atmosphere10.1016/j.ceramint.2014.10.146 ↗
20. In situ spinel formation in Al2O3-MgO-C filter materials for steel melt filtration10.1016/j.ceramint.2014.05.033 ↗
21. Fundamentals and applications on in situ spinel formation mechanisms in Al2O3-MgO refractory castables10.1016/j.ceramint.2011.10.074 ↗
22. Atmosphere and carbon effects on microstructure and phase analysis of in situ spinel formation in MgO-C refractories matrix10.1016/j.ceramint.2008.03.001 ↗
23. Effect of addition of TiO2 on reaction sintered MgO-Al2O3 spinels10.1016/S0955-2219(00)00097-2 ↗
24. Formation and sintering of spinels (MgAl2O4 ) in reducing atmospheres10.1016/S0254-0584(02)00333-4 ↗
25. Corrosion of spinel clinker by CaO-Al2O3-SiO2 ladle slag10.1016/S0955-2219(01)00509-X ↗
26. Magnesia grain size effect on in situ spinel refractory castables10.1016/j.jeurceramsoc.2008.05.014 ↗
27. In situ spinel expansion design by colloidal alumina suspension addition10.1111/j.1551-2916.2009.02934.x ↗
28. Oxidation kinetics of MgO-C refractory bricks10.1016/S0272-8842(02)00049-4 ↗
29. The effect of Mg vapor source on the formation of MgO whiskers and sheets10.1016/S0022-0248(02)01690-1 ↗
30. Mechanisms of oxide whisker growth