Mechanically activated combustion synthesis of Fe 3 Al composite powders reinforced with sub-micrometer TiC particles
Source abstract
Abstract
Abstract The aim of this work was to develop a process to synthesize Fe3Al matrix composite reinforced with nano scale TiC particles from pure elemental powders as reactants, employing combustion synthesis. The effects of particle size, pre-milling time of precursors on ignition temperature and final powder microstructure were studied. The synthesized composite powders were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectrometry (EDX). The targeted powder chemistry, microstructure and optimum spatial distribution of TiC particles were obtained using a pre-milling time of 30 min and a furnace temperature of 1100 °C. Powders synthesized in this condition contained only Fe3Al and TiC phases. Because of its high hardness and the presence of nanosized reinforcements, this composite powder can be considered a good candidate for thermal spray applications in manufacturing wear resistant parts.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Yielding, hardening and creep behavior of iron aluminides10.1016/S0921-5093(98)00935-6 ↗
2. Iron aluminides: present status and future prospects10.1016/S0921-5093(98)00909-5 ↗
3. Environmental embrittlement of iron aluminides10.1016/0966-9795(94)90001-9 ↗
4. Environmental effects on room-temperature ductility and fracture in Fe3Al10.1016/0956-716X(90)90275-L ↗
5. Strength and ductility of Fe 40Al alloy prepared by mechanical alloying10.1016/0921-5093(95)10041-5 ↗
6. Effect of chromium on properties of Fe 3 Al10.1557/JMR.1989.1156 ↗
7. In situ production of locally reinforced steel-based composites with TiC particulates using high-frequency induction process10.2355/isijinternational.46.617 ↗
8. Effects of particle size of reactant on characteristics of combustion synthesis of TiC-Fe cermet10.1023/A:1015313215455 ↗
9. Tribo-mechanical properties of HVOF deposited Fe3Al coatings reinforced with TiB2 particles for wear-resistant applications10.3390/ma9020117 ↗
10. Mechanical behavior and sliding wear studies on iron aluminide coatings reinforced with titanium carbide10.3390/met7050177 ↗
11. Microstructural and mechanical characteristics of in situ metal matrix composites10.1016/S0927-796X(00)00024-3 ↗
12. Nanocomposites obtained by mechanical alloying in Fe–Al–Ti–C system10.1016/j.jallcom.2007.01.013 ↗
13. Effect of MA on microstructure and synthesis path of in-situ TiC reinforced Fe–28at.% Al intermetallic composites10.1016/S0921-5093(01)01553-2 ↗
14. The FeAl–30% TiC nanocomposite produced by mechanical alloying and hot-pressing consolidation10.1016/S0966-9795(02)00009-2 ↗
15. Dry sliding wear behavior of Fe 3 Al and Fe 3 Al/TiC coatings prepared by HVOF10.1016/j.wear.2015.08.018 ↗
16. Combustion synthesis of advanced materials: Part I. Reaction parameters10.1016/0079-6425(94)00011-5 ↗
17. Combustion synthesis and nanomaterials10.1016/j.cossms.2008.12.002 ↗
18. Exo-MeltTM process for melting and casting intermetallics10.1016/S0966-9795(96)00067-2 ↗
19. In situ formation of TiB2/TiC and TiB2/TiN reinforced NiAl by self-propagating combustion synthesis10.1016/j.vacuum.2018.02.024 ↗
20. Combustion synthesis of Fe3Al/TiC composite powders10.1179/003258910X12740974839666 ↗
21. Standard · 1980
22. Comparison between the microstructural evolutions of two modes of SHS of NiAl: key to a common reaction mechanism10.1016/j.actamat.2003.08.018 ↗
23. Equilibrium of products of self-propagating high-temperature synthesis
24. Processing of Fe 3 Al and FeAl alloys by reaction synthesis10.1016/0966-9795(95)00006-K ↗
25. On the formation of intermetallics in Fe–Al system – an in situ XRD study10.1016/j.intermet.2012.08.020 ↗
26. On the formation of intermetallics in Fe–Al system–An in situ XRD study10.1016/j.intermet.2012.08.020 ↗
27. Characteristics of the combustion synthesis of TiC and Fe-TiC composites10.1007/BF01151089 ↗
28. Estimation of kinetic parameters for combustion synthesis of FeAl intermetallic compound by dipping experiment of Fe wire into Al melt10.2320/matertrans.M2009319 ↗
29. Combustion synthesis of Fe–Al/TiC composite powders and effect of Al content on its characteristics10.1179/003258910X12707304455149 ↗
30. In situ time-resolved diffraction coupled with a thermal ir camera to study mechanically activated SHS reaction: case of Fe–Al binary system10.1016/S1359-6454(98)00368-1 ↗
31. Kinetics of reactions in FeAl synthesis studied by the DTA technique and JMA model10.1016/j.intermet.2010.02.021 ↗
32. Thermoanalytical and metallographical investigations on the synthesis of TiAl3 from elementary powders10.1016/j.matchemphys.2005.08.075 ↗
33. Structural formation of aluminide phases on titanium substrate10.1016/j.surfcoat.2003.10.070 ↗
34. Dissolution-precipitation mechanism of laser igniting self-propagating high-temperature synthesis of Al/TiC composite10.1002/adem.200700088 ↗
35. Combustion synthesis of titanium carbide: theory and experiment10.1007/BF01144729 ↗
36. In situ synthesis of Al–TiC p composites by reacting K 2 TiF 6 and particulate graphite in molten aluminium10.1016/j.jallcom.2006.12.016 ↗
37. Analysis of in situ formation of titanium carbide in aluminum alloys10.1016/0921-5093(91)90207-4 ↗
38. Microstructure and properties of Fe3Al–Fe3AlC0.5 composites prepared by self-propagating high temperature synthesis casting10.1016/j.msea.2004.03.095 ↗
39. Al-TiC composites fabricated by a thermally activated reaction process in an Al melt using Al-Ti-C-CuO powder mixtures. Part I: microstructural evolution and reaction mechanism10.1007/s11661-014-2476-x ↗
40. Thermodynamic consideration of grain refinement of aluminum alloys by titanium and carbon10.1007/BF02650269 ↗
41. Maps of Fe–Al phases formation kinetics parameters during isothermal sintering10.1016/j.tca.2012.06.015 ↗
42. Fe–Al phase formation around SHS reactions under isothermal conditions10.1016/j.jallcom.2010.08.074 ↗
43. Kubaschewski · 2013
44. A study on the formation of iron aluminide (FeAl) from elemental powders10.1016/j.jallcom.2015.02.132 ↗
45. Reaction mechanism in self-propagating high temperature synthesis of TiC-TiB 2/Al composites from an Al-Ti-B 4 C system10.1016/j.msea.2006.11.055 ↗
46. A study of self-propagating high-temperature synthesis of NiAl in thermal explosion mode10.1016/S1359-6454(01)00387-1 ↗
47. Processing of iron aluminides by pressureless sintering through Fe+Al elemental route10.1016/S0921-5093(01)01442-3 ↗