Modeling and application of continuous growth restriction factor for elucidating development of as-welded grain size
Source abstract
Abstract
Abstract To reveal the as-welded grain growth within the weld pool is one of the hot points in weld solidification. An analytic model of continuous growth restriction factor will addresses this issue very well on the base of the analysis of growth restriction factor development along the solidification pathway within the weld pool, where growth restriction factor has been proved of value in analyzing the grain size. This model combines the solidification continuum and interdependence model, where the solidification continuum is the continuity of solute concentration profile when moving forward along the solidification pathway and the interdependence model describes the nucleation as a function of previous grain growth. The validity of the continuous growth restriction factor is assessed using experimental data from gas tungsten arc welded copper and aluminium alloys. The results show that the model can clearly explain the reasons of the length decrease in the planar growth zone near the fusion boundary by adding inoculants and/or increasing torch speed, as well as the development of grain size within the weld pool for a given composition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Characterisation of local grain size variation of welded structural steel10.1007/s40194-016-0318-8 ↗
2. Study on welding process and prosperities of AA5754 Al-alloy welded by double pulsed gas metal arc welding10.1016/j.matdes.2013.02.087 ↗
3. Microstructure evolution in Nd:YAG laser-welded (Zr53Cu30Ni9Al8)Si0.5 bulk metallic glass alloy10.1016/j.jallcom.2010.01.132 ↗
4. The redistribution of solute atoms during the solidification of metals10.1016/0001-6160(53)90126-6 ↗
5. Phenomenological modeling of fusion welding processes10.1557/S0883769400038835 ↗
6. 2002
7. Steady state columnar and equiaxed growth of dendrites and eutectic10.1016/0025-5416(84)90201-5 ↗
8. Solidification of GTA aluminum weld metal: Part 2—thermal conditions and model for columnar-to-equiaxed transition
9. Influence of solute content and solidification parameters on grain refinement of aluminum weld metal10.1007/s11661-013-1649-3 ↗
10. A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles10.1016/S1359-6454(00)00368-2 ↗
11. The influence of composition on equiaxed crystal growth mechanisms and grain size in Al alloys
12. The contribution of constitutional supercooling to nucleation and grain formation10.1007/s11661-015-2960-y ↗
13. An analytical model for constitutional supercooling-driven grain formation and grain size prediction10.1016/j.actamat.2010.01.052 ↗
14. Grain refinement of magnesium alloys: a review of recent research, theoretical developments, and their application10.1007/s11661-012-1513-x ↗
15. The contribution of constitutional supercooling to nucleation and grain formation10.1007/s11661-015-2960-y ↗
16. An analysis of the relationship between grain size, solute content, and the potency and number density of nucleant particles10.1007/s11661-005-0054-y ↗
17. The Interdependence Theory: the relationship between grain formation and nucleant selection10.1016/j.actamat.2011.04.035 ↗
18. The mechanism of grain refinement of titanium by silicon10.1016/j.scriptamat.2008.01.041 ↗
19. A new analytical approach to reveal the mechanisms of grain refinement10.1002/adem.200700157 ↗
20. Grain refinement of cast zinc through magnesium inoculation: characterisation and mechanism10.1016/j.matchar.2015.05.011 ↗
21. Grain refinement of AA333 aluminium cast alloy by Al–Ti granulated flux10.1016/j.matdes.2010.02.007 ↗
22. Grain refinement of Al–Si alloys by Nb–B inoculation. Part I: concept development and effect on binary alloys10.1016/j.matdes.2014.08.066 ↗
23. Understanding grain refinement in aluminium welding10.1007/s40194-015-0251-2 ↗
24. Grain refinement of wire arc additively manufactured titanium by the addition of silicon10.1016/j.jallcom.2016.11.049 ↗
25. Thermodynamic modelling of growth-restriction effects in aluminium alloys10.1016/j.actamat.2004.11.024 ↗
26. A mathematical analysis of solute redistribution during solidification10.1139/p55-089 ↗
27. Analysis of macrosegregation near fusion boundary in fusion welding10.1179/136217109X449229 ↗
28. Rajamäki · 2008
29. Solidification of GTA aluminum weld metal: Part I - grain morphology dependent upon alloy composition and grain refiner content
30. Inverse modelling of fusion welding processes10.1007/BF03263391 ↗
31. Modeling analysis of hybrid laser-arc welding of single-crystal nickel-base superalloys10.1016/j.actamat.2012.02.021 ↗
32. Grain boundary diffusion and segregation of Bi in Cu: radiotracer measurements in B and C diffusion regimes10.1016/j.actamat.2004.05.013 ↗
33. Liquidus slopes of impurities in ITS-90 fixed points from the mercury point to the copper point in the low concentration limit10.1088/0026-1394/53/4/1101 ↗
34. Controlling the microstructure and properties of wire arc additive manufactured Ti-6Al-4V with trace boron additions10.1016/j.actamat.2015.03.035 ↗
35. Fusion boundary microstructure evolution in aluminium alloys10.1007/BF03263458 ↗