journal article·2018-02Open access

Inducing strain hardening in a Zr-based bulk metallic glass via cobalt mediated phase separations

Shenghui Xie, Xianmeng Tu, J.J. Kruzic

Abstract

Novel Zr 63.78Cu 14.72Ni 10-xCo xAl 10Nb 1.5 bulk metallic glasses (BMGs) were prepared with progressively increasing amounts of Co substituted for Ni. Critical casting thicknesses were in the range of 4–5 mm, indicating a good glass forming ability. Transmission electron microscopy (TEM) of the as-cast amorphous structure revealed primary glassy phase separated regions a few dozens of nanometers in diameter. High yield strength (∼1495 MPa), fracture toughness (∼55 MPa√m), and strong strain hardening behavior were observed. Deformation induced secondary phase separation (<4 nm diameter) was found in a 100–300 nm wide region around a shear band. The large positive enthalpy of mixing for Co and Cu (+6 kJ/mol) are believed to contribute to the special two phase separations, which further favored the excellent strain hardening behavior.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions10.1103/PhysRevLett.84.2901 ↗
2. Bulk metallic glasses10.1016/j.mser.2004.03.001 ↗
3. Damage-tolerant Zr–Cu–Al-based bulk metallic glasses with record-breaking fracture toughness10.1557/jmr.2014.160 ↗
4. A damage-tolerant glass10.1038/nmat2930 ↗
5. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
6. J.W. Hutchinson, F. Spaepen, F ] exp [ s ], (n.d.).
7. Non-crystalline structure in solidified gold–silicon alloys10.1038/187869b0 ↗
8. Bulk metallic glasses as structural materials: a review10.1002/adem.201600066 ↗
9. Suryanarayana · 2011
10. Heterogeneity of a Cu47.5Zr47.5Al5 bulk metallic glass10.1063/1.2171472 ↗
11. Serrated plastic flow behavior and microstructure in a Zr-based bulk metallic glass processed by surface mechanical attrition treatment10.1016/S1006-706X(17)30072-9 ↗
12. The effect of nanocrystallization and free volume on the room temperature plasticity of Zr-based bulk metallic glasses10.1016/j.actamat.2008.07.012 ↗
13. Phase separation in Cu43Zr43Al7Ag7 bulk metallic glass10.1016/j.scriptamat.2005.03.046 ↗
14. Designing Zr-Cu-Co-Al bulk metallic glasses with phase separation mediated plasticity10.1007/s11661-011-1050-z ↗
15. Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass10.1016/j.msea.2015.08.055 ↗
16. Ductile bulk metallic glasses produced through designed heterogeneities10.1016/j.scriptamat.2011.07.039 ↗
17. Structural features of plastic deformation in bulk metallic glasses10.1063/1.4906305 ↗
18. Correlations between the relaxed excess free volume and the plasticity in Zr-based bulk metallic glasses10.1016/j.jallcom.2009.02.075 ↗
19. Free-volume-induced enhancement of plasticity in a monolithic bulk metallic glass at room temperature10.1016/j.scriptamat.2008.02.025 ↗
20. Short-range-order effects on intrinsic plasticity of metallic glasses10.1080/09500831003630781 ↗
21. Enhanced plasticity by introducing icosahedral medium-range order in ZrCuNiAl metallic glass10.1016/j.intermet.2012.01.006 ↗
22. Bulk metallic glass composites with transformation mediated work-hardening and ductility10.1002/adma.201000482 ↗
23. Plasticity-improved Zr-Cu-Al bulk metallic glass matrix composites containing martensite phase
24. Designing ductile CuZr-based metallic glass matrix composites10.1016/j.msea.2016.11.079 ↗
25. A strategy for designing bulk metallic glass composites with excellent work-hardening and large tensile ductility10.1016/j.jallcom.2016.05.290 ↗
26. Gradual martensitic transformation of B2 phase on TiCu-based bulk metallic glass composite during deformation10.1016/j.intermet.2016.05.002 ↗
27. Local melting to design strong and plastically deformable bulk metallic glass composites10.1038/srep42518 ↗
28. Phase formation and mechanical properties of Cu-Zr-Ti bulk metallic glass composites
29. Shear band morphology and fracture behavior of cold-rolled Zr52.5Ti5Cu18Ni14.5Al10 bulk metallic glass under tensile loading10.1016/j.jallcom.2017.03.015 ↗
30. Strong work-hardening behavior in a Ti-based bulk metallic glass composite10.1016/j.scriptamat.2013.03.004 ↗
31. Triple-yieldable multiphase reinforced bulk metallic glass matrix composites under tension10.1016/j.matlet.2017.01.043 ↗
32. Work-hardenable Mg-based bulk metallic glass matrix composites reinforced by ex-situ porous shape-memory-alloy particles10.1016/j.matlet.2016.07.082 ↗
33. β-type Ti-based bulk metallic glass composites with tailored structural metastability10.1016/j.jallcom.2017.03.074 ↗
34. Designing metallic glass matrix composites with high toughness and tensile ductility10.1038/nature06598 ↗
35. Fracture and fatigue behavior of a Zr-Ti-Nb ductile phase reinforced bulk metallic glass matrix composite10.1016/j.scriptamat.2003.08.020 ↗
36. Micromechanisms of plastic deformation of a dendrite/Zr-based bulk-metallic-glass composite10.1016/j.scriptamat.2009.08.044 ↗
37. Pronounced plasticity caused by phase separation and β-relaxation synergistically in Zr–Cu–Al–Mo bulk metallic glasses10.1038/s41598-017-01283-5 ↗
38. Influence of melt temperature on the compressive plasticity of a Zr-Cu-Ni-Al-Nb bulk metallic glass10.1007/s10853-010-4839-z ↗
39. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
40. Ultrasonic phase velocity by the pulse-echo-overlap method incorporating diffraction phase corrections10.1121/1.1910688 ↗
41. Cold rolling improves the fracture toughness of a Zr-based bulk metallic glass10.1016/j.jallcom.2016.10.134 ↗
42. In situ formation of two amorphous phases by liquid phase separation in Y-Ti-Al-Co alloy10.1063/1.1842360 ↗
43. Temperature rise at shear bands in metallic glasses10.1038/nmat1536 ↗