Interfacial behavior of Al/SiC composites and response against quasi-static loading, dynamic loading, fatigue, and ballistic impact
Source abstract
Abstract
Among different metal matrix composites, the aluminum reinforced SiC composites have shown robust mechanical properties. The outstanding properties are dependent on the morphology of the particles and volume of the SiC, agglomeration and uniform distribution, and strong interfacial bonding between Al and SiC. The material`s behavior varies under different loading conditions. Therefore, this review article critically analyzes the interfacial behavior of Al/SiC composites under different loading conditions. Firstly, the interfacial strength under quasi-static loading and its behavior have been explained. Further, the behavior of Al/SiC composites against extreme conditions such as dynamic compression, fatigue, and ballistic impact is reviewed. At the end of the article, some suggestions have been proposed so that it can reach its maximum potential under a range of loading circumstances.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Advance research progresses in aluminium matrix composites: manufacturing & applications10.1016/j.jmrt.2019.06.028 ↗
2. The application of metal matrix composite materials in propulsion system valves
3. A new class of high performance metal-fiber thermoplastic composites for additive manufacturing10.1016/j.compositesa.2023.107519 ↗
4. Spark plasma sintering of ceramic-reinforced binary/ternary nickel and titanium metal matrix composites: Mechanical properties, microstructure, and densification – a review
5. Characterization and modeling of the damage mechanisms in ductile steel metal-matrix composites: Application to virtual forming10.1016/j.mechmat.2023.104741 ↗
6. Hybrid influences of interphase and grain-size on material responses of CNT-reinforced metal matrix composites10.1016/j.apm.2023.08.047 ↗
7. Study of the mechanical properties of the metal matrix composites developed with alumina particles
8. Recent advances in processing, and mechanical, thermal and electrical properties of Cu-SiC metal matrix composites prepared by powder metallurgy10.1016/j.pmatsci.2023.101191 ↗
9. Formulation for zirconia toughened alumina (ZTA) reinforced metal matrix composites based on a three-phase concentric inclusion model10.1016/j.mechmat.2023.104660 ↗
10. Paradigm of state-of-the-art CNT reinforced copper metal matrix composites: processing, characterizations, and applications10.1016/j.jmrt.2023.05.083 ↗
11. Novel metal matrix composites reinforced with Zr-based metallic glass lattices
12. A novel ceramic reinforced hierarchical metal matrix composite (Fe/Fe2B): Production and characterization10.1016/j.ceramint.2023.04.154 ↗
13. Review of recent developments on metal matrix composites with particulate reinforcement
14. Application of Metal Matrix Composites in Non-Structural Applications
15. Development of 3D bicontinuous metal–intermetallic composites through subsequent alloying process after liquid metal dealloying10.1016/j.jma.2023.09.028 ↗
16. Investigation of the applicability of Cu–Fe–Mn–Ni based high entropy and compositionally complex alloys as metal matrix composites for cobalt free hot-pressed diamond tools10.1016/j.jmrt.2023.08.272 ↗
17. Initial tool wear and process monitoring during titanium metal matrix composite machining (TiMMC)10.1016/j.jmapro.2022.12.047 ↗
18. Biocompatibility of Metal Matrix Composites Used for Biomedical Applications
19. Effect of laser dwell time on pore elimination in powder bed fusion of metal matrix composites: experimentally validated modeling10.1016/j.jmrt.2022.11.103 ↗
20. Studies on grindability of magnesium based metal matrix composites
21. Microstructure and thermal properties of copper matrix composites reinforced by 3D carbon fiber networks10.1016/j.coco.2023.101758 ↗
22. Exploring the potential uses of Aluminium Metal Matrix Composites (AMMCs) as alternatives to steel bar in Reinforced Concrete (RC) structures-a state of art review
23. Study on the mechanical characteristics of aluminum metal matrix composites with tungsten carbide
24. A future prospects and current scenario of aluminium metal matrix composites characteristics10.1016/j.aej.2023.06.028 ↗
25. Optimization of stir casting process parameters in the fabrication of aluminium based metal matrix composites
26. Review of recent trends and developments in aluminium 7075 alloy and its metal matrix composites (MMCs) for aircraft applications10.1016/j.rineng.2023.101372 ↗
27. Influence of aluminum alloys on protection performance of metal matrix composite armor reinforced with ceramic particles under ballistic impact10.1016/j.ceramint.2023.07.046 ↗
28. Fabrication of aluminum metal matrix composite through continuous casting route: A review and future directions10.1016/j.jmapro.2023.04.041 ↗
29. Evaluation of tribological properties of aluminum 5154 /SiC/ TiB2 metal matrix composites
30. Incorporation of polysilazane precursor into aluminium melt for in-situ pyrolysis: Synthesis of in-situ metal matrix composites10.1016/j.mfglet.2023.09.008 ↗
31. Influence of marble waste reinforcement on mechanical properties and sliding wear behavior of an aluminium alloy metal matrix composite10.1016/j.jer.2023.08.002 ↗
32. Effect of different types of reinforcement on tribological properties of aluminium metal matrix composites (MMCs) – A review of recent studies
33. SiC/graphene reinforced aluminum metal matrix composites prepared by powder metallurgy: A review10.1016/j.jmapro.2023.02.026 ↗
34. Synthesis of nitrogen-doped graphene and its strengthening effect on aluminium metal matrix composite10.1016/j.apt.2023.104021 ↗
35. Appearance of reinforcement, interfacial product, heterogeneous nucleant and grain refiner of MgAl2O4 in aluminium metal matrix composites10.1016/j.jmrt.2023.07.121 ↗
36. Characterization of a functionally graded aluminium metal matrix composite (AMMC)10.1016/j.matlet.2023.135110 ↗
37. A summary of current advancements in hybrid composites based on aluminium matrix in aerospace applications10.1016/j.hybadv.2023.100117 ↗
38. Enhancement of tensile and fatigue properties of hybrid aluminium matrix composite via multipass friction stir processing10.1016/j.jmrt.2022.11.073 ↗
39. Investigation of the effect of age hardening on the mechanical properties of aluminium metal matrix composites reinforced with graphite particulate
40. Fatigue life prediction of aluminum-graphene nanocomposites: Application to high-capacity conductors10.1016/j.ijfatigue.2023.107749 ↗
41. Fatigue and failure analysis of aluminium and composite automotive wheel rims: Experimental and numerical investigation10.1016/j.engfailanal.2023.107064 ↗
42. Investigation on shear and fatigue performance of CFRP/aluminum alloy single-lap adhesive joint
43. Surface modification on aluminum metal matrix composite for high strength application -Current state of art
44. Fatigue life prediction of in-situ TiB2/2024 aluminum matrix composite10.1016/j.ijfatigue.2020.106128 ↗
45. Influence of nanoparticles addition on the fatigue failure behavior of metal matrix composites: Comprehensive review10.1016/j.engfailanal.2023.107751 ↗
46. Revealing the complex effects of particle bands on fatigue crack growth in an extruded aluminium matrix composite10.1016/j.ijfatigue.2022.106720 ↗
47. The experimental assessment of the various surface modifications on the tensile and fatigue behaviors of laminated aluminum/aramid fibers-epoxy composites10.1016/j.ijfatigue.2021.106560 ↗
48. A inclusive review: Fatigue behaviour and its failure mechanisms of aluminium - carbon nanotubes (CNT) composites: Part 3
49. Effect of processing parameters on the cyclic behaviour of aluminium friction stir welded to spark plasma sintered aluminium matrix composites with bimodal micro-and nano-sized reinforcing alumina particles10.1016/j.matchar.2022.112535 ↗
50. XFEM–ANN approach to predict the fatigue performance of a composite patch repaired aluminium panel
51. Enhanced mechanical and wear properties of aluminium-based composites reinforced with a unique blend of granite particles and boron carbide for sustainable material recycling10.1016/j.jallcom.2023.171165 ↗
52. Mechanical and dry sliding tribological characteristics of aluminium matrix composite reinforced with high entropy alloy particles10.1016/j.triboint.2023.109055 ↗
53. Effect of mixing method and particle size on hardness and compressive strength of aluminium based metal matrix composite prepared through powder metallurgy route10.1016/j.jmrt.2022.02.094 ↗
54. Mechanical properties of a new kind of porous aluminum alloy composite from ceramic hollow spheres with high strength10.1016/j.jallcom.2022.164911 ↗
55. Studies on microstructural and mechanical properties of (Nano SiC + Waste Spent catalyst) reinforced aluminum matrix composites
56. Effect of cumulative deformation and interlayer mechanical properties on bonding strength of corrugated interface steel/aluminum composite plate10.1016/j.jmapro.2023.08.028 ↗
57. Enhanced mechanical properties of aluminum matrix composites reinforced with high-entropy alloy particles via asymmetric cryorolling10.1016/S1003-6326(23)66238-7 ↗
58. Microstructure and properties of FeCoNi1.5CrCup/Al high-entropy alloy strengthened aluminum matrix composites and finite element simulation
59. Compressive Response of Aluminum Metal Matrix Composites
60. Effect of sintering techniques on microstructural, mechanical and tribological properties of Al-SiC composites
61. Metal-faced sandwich composite panels: A review10.1016/j.tws.2023.111376 ↗
62. Ballistic behavior and microstructure evolution of B4C/AA2024 composites10.1016/j.ceramint.2019.07.033 ↗
63. The microstructure and ballistic performance of B4C/AA2024 functionally graded composites with wide range B4C volume fraction10.1016/j.compositesb.2018.12.147 ↗
64. High velocity ballistic performance of ZrSiO4 reinforced aluminum alloy matrix composites
65. Ballistic impact performance of hybrid composite armors made of aluminum foam containing the dispersion of shear thickening fluid made of various synthetic nano-fillers
66. Investigation on the ballistic performance of the aluminum matrix composite armor with ceramic balls reinforcement under high velocity impact10.1016/j.dt.2023.01.015 ↗
67. Material design for ballistic applications: A numerical analysis of surface reinforced AA6061-T6 metal matrix composite
68. Ballistic performance of integral body armor with closed-cell aluminum foam: A numerical study10.1016/j.finmec.2023.100187 ↗
69. Analysis of ballistic resistance of composites based on EN AC-44200 aluminum alloy reinforced with Al2O3 particles10.1016/j.compstruct.2018.06.099 ↗
70. Probing the molecular-level energy absorption mechanism and strategic sequencing of graphene/Al composite laminates under high-velocity ballistic impact of nano-projectiles10.1016/j.apsusc.2023.156502 ↗
71. Enhancement of wear and ballistic resistance of armour grade AA7075 aluminium alloy using friction stir processing10.1016/j.dt.2014.08.003 ↗
72. Microstructural evolution, shielding effectiveness, and the ballistic response of Mg/Al7075/B4C/Pb composite produced by combination of coating and severe plastic deformation (SPD) processes10.1016/j.jmapro.2022.10.062 ↗
73. Enhanced strength and ductility of Al-SiC nanocomposites synthesized by accumulative roll bonding10.1016/j.jmrt.2019.10.077 ↗
74. RETRACTED: Effect of sintering time on the bending strength and CTE of SiC/Al–35Si composite10.1016/j.vacuum.2015.11.013 ↗
75. Investigation of Ti alloying for microstructural evolution and strengthening mechanism: Avoiding Al4C3 formation in SiCp/Al composites via laser directed energy deposition10.1016/j.jallcom.2023.172371 ↗
76. High-strength, ductility and modulus Al–Li/B4C composite with near nanostructure produced by accumulative roll bonding10.1016/j.jallcom.2020.155105 ↗
77. Microtopography and mechanical properties of vacuum hot pressing Al/B4C composites10.1016/j.ceramint.2017.11.065 ↗
78. Phase transformation and mechanical properties of B4C/Al composites10.1016/j.jmrt.2019.12.042 ↗
79. Deng · 2023
80. Towards the strength-ductility synergy of Al2O3/Al composite through the design of roughened interface10.1016/j.compositesb.2021.109251 ↗
81. Microstructure and mechanical characterization of Al2O3/graphene reinforced Al6061 based hybrid nanocomposites10.1007/s12540-021-01103-6 ↗
82. Mechanical and microstructural analysis of Al-Al2O3/B4C hybrid composites
83. Strengthening and toughening mechanisms in graphene-Al nanolaminated composite micro-pillars10.1016/j.actamat.2016.11.043 ↗
84. Mechanical properties of graphene oxide reinforced aluminium matrix composites10.1016/j.compositesb.2018.03.022 ↗
85. Graphene oxide/Al composites with enhanced mechanical properties fabricated by simple electrostatic interaction and powder metallurgy10.1016/j.jallcom.2018.10.158 ↗
86. Microstructure and mechanical properties of graphene nanoplates reinforced pure Al matrix composites prepared by pressure infiltration method10.1016/j.jallcom.2017.10.283 ↗
87. Enhancement of the strength-ductility relationship for carbon nanotube/Al–Cu–Mg nanocomposites by material parameter optimisation10.1016/j.carbon.2019.10.080 ↗
88. Tensile properties of carbon nanotubes reinforced aluminum matrix composites: A review10.1016/j.carbon.2020.01.007 ↗
89. Microwave and spark plasma sintering of carbon nanotube and graphene reinforced aluminum matrix composite10.1016/j.acme.2018.02.006 ↗
90. Mechanical and thermal expansion behavior of hybrid aluminum matrix composites reinforced with SiC particles and short carbon fibers10.1016/j.jallcom.2023.169550 ↗
91. Effect of Nano-SiC coating on the thermal properties and microstructure of diamond/Al composites10.1016/j.coco.2023.101564 ↗
92. Improvement of thermal properties of Al/Cu/SiC composites by tailoring the reinforcement microstructure and comparison to thermoelastic models10.1016/j.jallcom.2020.156794 ↗
93. Effect of thermal shock induced dislocation multiplication on the thermal conductivity of 60 vol% SiCp/Al-7Si composites10.1016/j.coco.2023.101554 ↗
94. Effect of nanometer SiC coating on thermal conductivity and bending strength of graphite flake/6063Al composites10.1016/j.jallcom.2020.158023 ↗
95. Investigating the effect of SiC particles on the physical and thermal properties of Al6061/SiCp composite10.1016/j.jallcom.2019.05.317 ↗
96. Mechanical, thermal and electrical properties of monolayer and bilayer graded Al/SiC/rice husk ash (RHA) composite10.1016/j.jallcom.2016.12.339 ↗
97. Effect of porosity and interface structures on thermal and mechanical properties of SiCp/6061Al composites with high volume fraction of SiC10.1016/S1003-6326(19)65003-X ↗
98. The tribological characteristics of SiC particle reinforced aluminium composites10.1016/j.acme.2014.05.003 ↗
99. Wear behavior of Al 5252 alloy reinforced with micrometric and nanometric SiC particles10.1016/j.triboint.2016.05.013 ↗
100. Experimental and FEM study of cutting mechanism and damage behavior of ceramic particles in orthogonal cutting SiCp/Al composites10.1016/j.ceramint.2020.11.072 ↗