Influence of GH4169 addition on cracking control, microstructure and mechanical properties of GH4169/K465 composite material manufactured by selective laser melting
Source abstract
Abstract
In the process of additive manufacturing, K465 nickel-based superalloy tends to form a eutectic structure with a low melting point. Subsequently, rapid cooling leads to the formation of significant residual tensile stress. This tensile stress makes the prepared sample susceptible to cracking. The research explored the susceptibility to cracking of the alloy material and analyzed the microstructure and properties of GH4169/K465 alloy obtained. The generation of cracks can be managed by decreasing the concentration of Al and Ti elements. The microstructure of GH4169/K465 alloy consists of a matrix phase γ, a white Laves precipitated phase, and spherical particle precipitated phase NbTi 4 . The mechanical properties of samples 1GH1K, 7GH5K, and 3GH1K were analyzed. The results indicated an elongation exceeding 20 %, a tensile strength exceeding 1000 MPa, and a reduction in hardness from 329 HV to 285 HV. The powder mixing process has been demonstrated to effectively address the shortcomings of individual materials by combining the strengths of different alloy materials to produce a hybrid material with excellent comprehensive performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
2. Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: a review
3. Effects of selective laser melting parameters on surface quality and densification behaviours of pure nickel10.1016/S1003-6326(22)65972-7 ↗
4. A review of mechanical properties of additively manufactured Inconel 718
5. Microstructural study of transient liquid phase bonded DD98 and K465 superalloys at high temperature10.1016/j.matchar.2011.03.012 ↗
6. Microstructure and microhardness of laser metal deposition shaping K465/stellite-6 laminated material10.3390/met7110512 ↗
7. Solidification rate driven microstructural stability and its effect on the creep property of a polycrystalline nickel-based superalloy K46510.1016/j.msea.2019.138530 ↗
8. Microstructural characteristics and mechanical properties of laser solid formed K465 superalloy10.1016/j.msea.2017.05.064 ↗
9. Microstructural and compositional design of Ni-based single crystalline superalloys ― a review10.1016/j.jallcom.2018.01.224 ↗
10. Crack control study of laser additive repair K465 high temperature alloy
11. Role of laser scan strategies in defect control, microstructural evolution and mechanical properties of steel matrix composites prepared by laser additive manufacturing10.1007/s12613-020-2133-x ↗
12. Crack sensitivity study of Inconel 738 laser clad on directionally solidified nickel-based high temperature alloy
13. Microstructure and microhardness of laser metal deposition shaping K465/stellite-6 laminated material10.3390/met7110512 ↗
14. Microstructure related failure mechanism of selective laser melted GH4169 with interior fatigue cracking10.1016/j.matlet.2021.131284 ↗
15. Evolution of microstructures and properties of the GH4169 superalloy during short-term and high-temperature processing10.1016/j.msea.2018.12.019 ↗
16. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting10.1016/j.actamat.2011.12.032 ↗
17. Selective laser melting additive manufacturing of Inconel 718 superalloy parts: densification, microstructure and properties10.1016/j.jallcom.2013.09.171 ↗
18. Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing10.1016/j.matdes.2017.03.004 ↗
19. Laser powder bed fusion of an age-hardenable Mg-10Gd-0.2Zr alloy with excellent strength-ductility synergy10.1016/j.jallcom.2022.164863 ↗
20. Solidification rate driven microstructural stability and its effect on the creep property of a polycrystalline nickel-based superalloy K46510.1016/j.msea.2019.138530 ↗
21. The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing10.1016/j.actamat.2018.10.032 ↗
22. Investigation of dissolution behavior of laves phase in inconel 718 fabricated by laser directed energy deposition
23. Quantitative microstructural evolution and corresponding stress rupture property of K465 superalloy10.1016/j.msea.2015.11.026 ↗
24. Studies of standard heat treatment effects on microstructure and mechanical properties of laser net shape manufactured INCONEL 71810.1007/s11661-009-9949-3 ↗
25. Influence of Nb content on phase precipitation behavior of new Ni–Co-based superalloys by selective laser melting10.1016/j.jmrt.2023.04.203 ↗
26. Imaging and characterization of γ′ and γ″ nanoparticles in Inconel 718 by EDX elemental mapping and FIB–SEM tomography10.1016/j.matchar.2014.12.012 ↗
27. High-power laser powder bed fusion of 316L stainless steel: defects, microstructure, and mechanical properties10.1016/j.jmapro.2022.08.066 ↗
28. Understanding tensile and creep properties of WC reinforced nickel-based composites fabricated by selective laser melting10.1016/j.msea.2020.140431 ↗
29. Microstructure and mechanical properties of Inconel 718 produced by SLM and subsequent heat treatment10.4028/www.scientific.net/KEM.651-653.665 ↗
30. Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy10.1016/j.scriptamat.2011.03.024 ↗
31. Quantitative microstructural evolution and corresponding stress rupture property of K465 superalloy10.1016/j.msea.2015.11.026 ↗
32. Microstructure study of laser welding cast nickel-based superalloy K41810.1016/j.jmatprotec.2007.12.091 ↗
33. A fine grain casting K465 alloy low pressure turbine blade organization and mechanical properties
34. Additive manufacturing of magnesium alloys by selective laser melting technology: a review
35. Effect of heat treatment on microstructures and mechanical properties of Inconel 718 additively manufactured using gradient laser power10.1016/j.msea.2023.144754 ↗
36. Strengthening additively manufactured Inconel 718 through in-situ formation of nanocarbides and silicides
37. Influence of post-heat-treatment on the microstructure and fracture toughness properties of Inconel 718 fabricated with laser directed energy deposition additive manufacturing10.1016/j.msea.2020.140092 ↗
38. Study on microstructure and mechanical properties of laser rapid forming Inconel 71810.1016/j.msea.2007.05.079 ↗
39. Effect of Co content on the microstructure, mechanical properties and corrosion behavior of Zr alloys10.1016/j.matchar.2023.113067 ↗
40. The cellular boundary with high density of dislocations governed the strengthening mechanism in selective laser melted 316L stainless steel10.1016/j.msea.2020.140279 ↗
41. Analytic model for the Orowan dislocation-precipitate bypass mechanism10.1016/j.mtla.2020.100671 ↗
42. Effect of melt temperature on the quasi-equilibrium solidification of K465 Ni-based superalloy10.1016/j.jmrt.2024.03.233 ↗