The relationship between deformation mechanisms and mechanical properties in nanocrystalline Cu/Ag-bilayer alloy
Source abstract
Abstract
The nanocrystalline metallic bilayer structure can effectively enhance the strength of Cu alloy while maintaining excellent electrical conductivity. Based on the microstructure evolution of Cu/Ag alloy observed by transmission electron microscope (TEM), molecular dynamics (MD) simulations of Cu/Ag alloy with nanocrystalline metallic bilayer structure were established. The mechanical properties and deformation mechanisms of nanocrystalline Cu/Ag-bilayer alloys were investigated at different temperatures. A mixed Hall-Petch (H-P) relationship was observed between the ultimate stress and the increased layer thickness. In this paper, the deformation mechanism changes from dislocation accumulation at the Cu-Ag interface to dislocation through the Cu-Ag interface. In addition, the data analysis results of elastic modulus showed an approximately linear decrease trend with increasing temperature, and the deformation mechanism shifted from dislocation motion to a combination of dislocation motion and grain boundaries (GBs) diffusion. These findings provide guidance for the design of high magnetic field facility (HMFF) water-cooled magnets and very large-scale integration (VLSI) lead frames.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic properties of thin films · Microstructure and mechanical properties · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Review of nano-phase effects in high strength and conductivity copper alloys10.1515/ntrev-2019-0034 ↗
2. Transient dislocation emission from the nanosized interface of Cu–Ag composite under the coupled thermal-mechanical shock: molecular dynamics simulations study
3. Recent development of advanced precipitation-strengthened Cu alloys with high strength and conductivity: a review
4. High strength and high conductivity Cu alloys: a review10.1007/s11431-020-1633-8 ↗
5. Present status and future plan of the Tsukuba Magnet Laboratories10.1016/0921-4526(95)00459-9 ↗
6. Development of high strength-high conductivity Cu-6 wt% Ag alloy for high field magnet10.1557/adv.2015.4 ↗
7. The United States national high magnetic field laboratory: facilities, science and technology10.1016/0921-4526(95)00460-2 ↗
8. Microstructure evolution and properties of Cu–Ag microcomposites with different Ag content10.1016/j.msea.2006.07.125 ↗
9. Influence of thermomechanical process and Fe addition on microstructural evolution and properties of Cu-26 wt%Ag composite10.1016/j.jallcom.2018.09.179 ↗
10. Microstructural evolution and strengthening mechanisms in cold-rolled Cu–Ag alloys10.1016/j.jallcom.2020.156893 ↗
11. Layer thickness dependent tensile deformation mechanisms in sub-10 nm multilayer nanowires10.1063/1.4730337 ↗
12. Molecular dynamics simulations for the Ag/Cu (111) system: from segregated to constitutive interfacial vacancies10.1016/S0169-4332(00)00195-1 ↗
13. Growth of Ag on Cu(100) studied by STM: from surface alloying to Ag superstructures10.1103/PhysRevB.54.8163 ↗
14. Interaction between deformation twins and interfaces in Cu/Ag alloys10.1016/j.commatsci.2022.111219 ↗
15. Lattice dislocation induced misfit dislocation evolution in semi-coherent {111} bimetal interfaces
16. High strength, high electrical conductivity and thermally stable bulk Cu/Ag nanolayered composites prepared by cross accumulative roll bonding
17. Deformability of ultrahigh strength 5 nm Cu/Nb nanolayered composites10.1063/1.2938921 ↗
18. Misra, A.; Demkowicz, M.J.; Zhang, X., The Radiation Damage Tolerance of Ultra-High Strength Nanolayered Composites.
19. Influence of interfaces on the storage of ion-implanted He in multilayered metallic composites
20. Work hardening in rolled nanolayered metallic composites10.1016/j.actamat.2004.09.018 ↗
21. Effects of deposition parameters on residual stresses, hardness and electrical resistivity of nanoscale twinned 330 stainless steel thin films10.1063/1.1883724 ↗
22. Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites10.1016/j.actamat.2005.06.025 ↗
23. Twins and grain boundaries-dominated the reverse Bauschinger effect and tension-compression asymmetry10.1016/j.jmrt.2022.02.080 ↗
24. The grain boundary effect on shock induced spallation of polycrystalline uranium10.1016/j.ijmecsci.2022.107491 ↗
25. The size effect and plastic deformation mechanism transition in the nanolayered polycrystalline metallic multilayers10.1063/1.4884220 ↗
26. Molecular dynamics simulation of mechanical properties of nanocrystalline platinum: grain-size and temperature effects10.1016/j.physleta.2018.10.053 ↗
27. Effects of grain size and shape on mechanical properties of nanocrystalline copper investigated by molecular dynamics10.1016/j.msea.2014.07.066 ↗
28. Deformation twinning in nanocrystalline Al by molecular-dynamics simulation10.1016/S1359-6454(02)00318-X ↗
29. Microscopic description of plasticity in computer generated metallic nanophase samples: a comparison between Cu and Ni10.1016/S1359-6454(99)00109-3 ↗
30. Inverse Hall–Petch relationship in nanocrystalline tantalum
31. Ideal maximum strengths and defect-induced softening in nanocrystalline-nanotwinned metals10.1038/s41563-019-0484-3 ↗
32. Defect-interface interactions in irradiated Cu/Ag nanocomposites
33. An embedded-atom potential for the Cu–Ag system10.1088/0965-0393/14/5/002 ↗
34. Twin-interface interactions in nanostructured Cu/Ag: molecular dynamics study10.1016/j.actamat.2017.10.036 ↗
35. , Formation of two glass phases in binary Cu-Ag liquid10.1016/j.actamat.2020.05.060 ↗
36. Atomsk: A tool for manipulating and converting atomic data files10.1016/j.cpc.2015.07.012 ↗
37. Texture segmentation using voronoi polygons10.1109/34.44407 ↗
38. Plimpton, S., Fast parallel algorithms for short-range molecular dynamics. 1993.10.2172/10176421 ↗
39. Hoover NPT dynamics for systems varying in shape and size10.1080/00268979300100371 ↗
40. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
41. Molecular dynamics simulations of mechanical properties for Cu(0 0 1)/Ni(0 0 1) twist boundaries10.1016/j.commatsci.2012.04.035 ↗
42. Casting lightweight stiff aluminum alloys: a review10.1080/10408436.2018.1549975 ↗
43. On the elastic moduli nanocrystalline Fe, Cu, Ni, and Cu-Ni alloys prepared by mechanical milling/alloying
44. Repulsive force vs. source number: Competing mechanisms in the yield of twinned gold nanowires of finite length10.1016/j.actamat.2010.12.031 ↗
45. Influence of bimetal interface confinement on the Hall-petch slope of multiscale Cu/Nb multilayer composites10.1016/j.heliyon.2023.e16231 ↗
46. Effect of constrained inter-granular regions on the inverse Hall-petch phenomena10.1016/j.msea.2023.145125 ↗
47. Temperature effect on mechanical response of c-plane monocrystalline gallium nitride in nanoindentation: a molecular dynamics study10.1016/j.ceramint.2020.02.035 ↗
48. Temperature-based plastic deformation mechanism of Cu/Ag nanocomposites: a molecular dynamics study10.1016/j.commatsci.2017.12.041 ↗
49. Underlying mechanisms of enhanced plasticity in Ti/Al laminates at elevated temperatures: a molecular dynamics study10.1016/j.jmrt.2023.11.201 ↗
50. Molecular dynamic study on the deformation mechanism based on strain rate, solute atomic concentration and temperature in dual-phase equiaxial nanocrystalline AgCu alloy10.1016/j.jallcom.2019.04.304 ↗