In situ preparation of an advanced binder with a triple-crosslinking network for high-performance silicon anodes
Source abstract
Abstract
Silicon serves as a promising anode material for lithium-ion batteries. However, silicon suffers from low initial coulombic efficiency (ICE) and poor cycling performance due to large volume change, lithium consumption, the formation of a solid-electrolyte interphase (SEI), and low conductivity. To improve the performance of silicon anodes, this work proposed a new strategy for the design of silicon electrode binders based on β -cyclodextrin, citric acid, and sodium alginate, where a binder with a chemical/ionic/hydrogen-bonded triple-crosslinked network was constructed in situ during electrode preparation. The binder with a triple-crosslinked network provided the silicon electrode with a high binding strength, excellent ion/electron permeation network, and robust interfacial protective layer, providing better tolerate volume changes, and inhibiting the interfacial side reactions and the formation of solid-electrolyte interphase, as well as accelerating Li + diffusion during the charge/discharge processes. The prepared silicon electrodes had a higher ICE (92.8%), better cycling stability (1429 mAh/g after 400 cycles at 0.5 C), and superior rate performance (1274 mAh/g at 4 C). This work may guide the design of high-performance binders for silicon electrodes.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Design of multifunctional polymeric binders in silicon anodes for lithium-ion batteries
2. Review on the binders for sustainable high-energy-density lithium ion batteries: status, solutions, and prospects10.1002/adfm.202305161 ↗
3. A comprehensive review of current and emerging binder technologies for energy storage applications10.1021/acsaem.3c02218 ↗
4. Recent progress and future perspective on practical silicon anode-based lithium ion batteries10.1016/j.ensm.2022.01.042 ↗
5. The status of representative anode materials for lithium-ion batteries10.1002/tcr.202300004 ↗
6. Research progress on the structural design and optimization of silicon anodes for lithium-ion batteries: a mini-review10.3390/coatings13091502 ↗
7. Engineering prelithiation of polyacrylic acid binder: a universal strategy to boost initial coulombic efficiency for high-areal-capacity Si-based anodes10.1002/adfm.202206615 ↗
8. Structural control and optimization schemes of silicon-based anode materials10.1002/ente.202201496 ↗
9. Theoretical progresses in silicon anode substitutes for Lithium-ion batteries10.1016/j.est.2022.105352 ↗
10. Revisit the progress of binders for a silicon-based anode from the perspective of designed binder structure and special sized silicon nanoparticles10.1021/acs.iecr.2c00453 ↗
11. Robust 3D network binder for stable and high-performance Si-based lithium-ion battery anodes10.1002/admt.202201830 ↗
12. Mechanical properties vs. interaction strength: comprehensive understanding of aqueous binders? formulation on Si-based anodes for lithium-ion batteries10.1016/j.jpowsour.2023.232800 ↗
13. Boston ivy-inspired natural-rich binder with strong adhesion for advanced silicon-based anodes10.1016/j.cej.2023.143784 ↗
14. Novel rigid-flexible hydrogenated carboxyl nitrile rubber-guar gum binder for ultra-long cycle silicon anodes in lithium-ion batteries10.1016/j.jpowsour.2023.232759 ↗
15. The effects of lithium ions and pH on the function of polyacrylic acid binder for silicon anodes10.1149/1945-7111/aceab1 ↗
16. An elastic cross-linked binder for silicon anodes in lithium-ion batteries with a high mass loading10.1021/acsami.2c16997 ↗
17. Key factors for binders to enhance the electrochemical performance of silicon anodes through molecular design10.1002/smll.202101680 ↗
18. A review of existing and emerging binders for silicon anodic Li-ion batteries10.1007/s12274-022-5281-7 ↗
19. Cross-linking chemistry enables robust conductive polymeric network for high-performance silicon microparticle anodes in lithium-ion batteries10.1016/j.jpowsour.2022.232495 ↗
20. Re-engineering poly(Acrylic Acid) binder toward optimized electrochemical performance for silicon lithium-ion batteries: branching architecture leads to balanced properties of polymeric binders
21. Construction of dual crosslinked network binder via sequential ionic crosslinking for high-performance silicon anodes10.1007/s12598-023-02261-9 ↗
22. Metal-Coordination mediated polyacrylate for high performance silicon microparticle anode10.1002/batt.202000136 ↗
23. N-type polyoxadiazole conductive polymer binders derived high-performance silicon anodes enabled by crosslinking metal cations10.1021/acsami.2c19587 ↗
24. The effects of cross-linking cations on the electrochemical behavior of silicon anodes with alginate binder10.1016/j.electacta.2018.02.168 ↗
25. Self-healing polymer binders for the Si and Si/carbon anodes of lithium-ion batteries10.1016/S1872-5805(22)60638-3 ↗
26. Advanced binder with ultralow-content for high performance silicon anode10.1016/j.jpowsour.2022.232237 ↗
27. Dynamic hydrogen bond cross-linking binder with self-healing chemistry enables high-performance silicon anode in lithium-ion batteries10.1016/j.jcis.2023.12.057 ↗
28. Binary network of conductive elastic polymer constraining nanosilicon for a high-performance lithium-ion battery10.1021/acsnano.1c04240 ↗
29. A highly stretchable and self-healing composite binder based on the hydrogen-bond network for silicon anodes in high-energy-density lithium-ion batteries10.1002/celc.202200155 ↗
30. Cross-linked β-CD-CMC as an effective aqueous binder for silicon-based anodes in rechargeable lithium-ion batteries10.1039/D1RA08538G ↗
31. Cyclodextrins for lithium batteries applications10.3390/ma16165540 ↗
32. Polyacrylic acid and beta-cyclodextrin polymer cross-linking binders to enhance capacity performance of silicon/carbon composite electrodes in lithium-ion batteries10.1016/j.jcis.2022.01.040 ↗
33. PAAS-beta-CDp-PAA as a high-performance easily prepared and water- soluble composite binder for high-capacity silicon anodes in lithium-ion batteries10.1016/j.jallcom.2022.167666 ↗
34. A self-adapting artificial SEI layer enables superdense lithium deposition for high performance lithium anode10.1016/j.ensm.2021.11.022 ↗
35. Intermolecular cross-linking reinforces polymer binders for durable alloy-type anode materials of sodium-ion batteries10.1002/aenm.202202939 ↗
36. Crosslinked poly(acrylic acid) enhances adhesion and electrochemical performance of Si anodes in Li-ion batteries10.1016/j.electacta.2022.140038 ↗
37. Improved electrochemical performance of composite anion exchange membranes for fuel cells through cross linking of the polymer chain with functionalized graphene oxide10.1016/j.memsci.2020.118385 ↗
38. Anion Exchange Membrane Based on Cross-Linked Poly(2,6-dimethyl-1,4-phenylene oxide)/Poly(dimethylaminophenyl bisdiphenol) for Fuel Cell Applications10.1021/acsaem.3c02554 ↗
39. Dynamic cross-linking of an alginate-acrylamide tough hydrogel system: time-resolved in situ mapping of gel self-assembly10.1039/D0RA09210J ↗
40. CMC-citric acid Cu(II) cross-linked binder approach to improve the electrochemical performance of Si-based electrodes10.1016/j.electacta.2019.03.026 ↗
41. A redox-active 2D metal-organic framework for efficient lithium storage with extraordinary high capacity10.1002/anie.201914395 ↗
42. An energy dissipative binder for self-tuning silicon anodes in lithium-ion batteries10.1002/advs.202205443 ↗
43. Superorganophilic MAF-6/PP composite separator boosts lithium metal anode performance10.1016/j.ensm.2021.02.021 ↗
44. Conjugated imine polymer synthesized via step-growth metathesis for highly stable silicon nanoparticle anodes in lithium-ion batteries10.1002/aenm.202203921 ↗
45. Exploring more functions in binders for lithium batteries10.1007/s41918-023-00198-2 ↗
46. Effect of binder content on silicon microparticle anodes for lithium-ion batteries10.1149/1945-7111/acb388 ↗
47. Inner carbon black porosity as characteristic parameter for the microstructure of lithium-ion electrodes and its effect on physical and electrochemical properties10.1016/j.jpowsour.2022.231259 ↗
48. Competitive adsorption within electrode slurries and impact on cell fabrication and performance10.1016/j.jpowsour.2021.230914 ↗
49. Lambda carrageenan as a water-soluble binder for silicon anodes in lithium-ion batteries10.1021/acssuschemeng.2c03313 ↗
50. A carboxymethyl vegetable gum as a robust water soluble binder for silicon anodes in lithium-ion batteries10.1016/j.jpowsour.2021.229530 ↗
51. A physically cross-linked hydrogen-bonded polymeric composite binder for high-performance silicon anodes10.1021/acsaem.1c01849 ↗
52. A biopolymer network for lean binder in silicon nanoparticle anodes for lithium-ion batteries
53. A cycling robust network binder for high performance Si-based negative electrodes for lithium-ion batteries10.1016/j.jcis.2020.06.008 ↗
54. A conductive self healing polymeric binder using hydrogen bonding for Si anodes in lithium ion batteries10.1038/s41598-020-71625-3 ↗
55. Tailoring a multifunctional, boron and fluoride-enriched solid-electrolyte interphase precursor towards high-rate and stable-cycling silicon anodes10.1016/j.nanoen.2021.106811 ↗
56. Bio-based adenine-derived polyimide as a dual-functional binder for the silicon anode in lithium-ion batteries10.1021/acsaem.3c01991 ↗
57. Inorganic crosslinked supramolecular binder with fast Self-Healing for high performance silicon based anodes in Lithium-Ion batteries10.1016/j.jcis.2022.06.002 ↗
58. Electrochemical synthesis of multidimensional nanostructured silicon as a negative electrode material for lithium-ion battery10.1021/acsnano.1c11393 ↗
59. Coordinatively-intertwined dual anionic polysaccharides as binder with 3D network conducive for stable SEI formation in advanced silicon-based anodes
60. Surface engineering of commercial Ni foams for stable Li metal anodes10.1016/j.ensm.2019.04.003 ↗
61. Boosting the electrochemical performance of 3D composite lithium metal anodes through synergistic structure and interface engineering10.1016/j.ensm.2019.12.023 ↗