Hardness reversal in severely deformed automotive Al-Mg-Si alloys
Source abstract
Abstract
For automotive Al-Mg-Si alloys, when artificially aged with or without small pre-deformation, the peak hardness of Si-rich alloys is always higher than that of Mg-rich alloys. This is due to the fact that Si-rich alloys form a higher volume fraction of the β"-phase precipitates. Here we report an abnormal case where Mg-rich alloys can achieve a higher peak hardness than that of Si-rich alloys if the alloys are deformed more than 80 % before artificially aging. Electron microscopy reveals that this hardness reversal is caused by a subtle change in precipitate microstructure. The main types of precipitates formed in the 80 % pre-deformed alloys at the peak-aging stage are the late-stage precipitates, rather than the β"-precipitates. Nevertheless, the predominant precipitates formed in Mg-rich alloys are the β` and β`/β`–2 precipitates, whereas those formed in Si-rich alloys are the B`-precipitates and their composite precipitates. The former ones seem more effective in strengthening the alloys. Our findings show that in addition to the β`-phase among the late-stage phases in Al-Mg-Si alloys, the B`-phase can form directly upon aging and become the primary strengthening phase of the alloys. This study provides insights into the subtle differences between late-stage precipitates and the compositional design of Al-Mg-Si alloys prepared by mechanical-thermal processes.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Development and applications of aluminum alloys for aerospace industry10.1016/j.jmrt.2023.09.274 ↗
2. Experimental study and phase diagram calculation in Al–Zn–Mg–Si quaternary system10.1016/j.jallcom.2010.04.089 ↗
3. Insight into Si poisoning on grain refinement of Al-Si/Al-5Ti-B system10.1016/j.actamat.2020.01.039 ↗
4. In-situ observation of grain refinement dynamics of hypoeutectic Al-Si alloy inoculated by Al-Ti-Nb-B alloy10.1016/j.scriptamat.2020.06.020 ↗
5. Corrosion behaviour of hot-dip Al–Zn–Si and Al–Zn–Si–3Mg coatings in NaCl solution10.1016/j.corsci.2017.03.013 ↗
6. Novel Al-Ti-Nb-B grain refiners with superior efficiency for Al-Si alloys10.1016/j.scriptamat.2020.06.037 ↗
7. The precipitation sequence in Al–Mg–Si alloys10.1016/S1359-6454(98)00059-7 ↗
8. Atomic pillar-based nanoprecipitates strengthen AlMgSi alloys10.1126/science.1124199 ↗
9. Structure determination of Mg5Si6 particles in Al by dynamic electron diffraction studies10.1126/science.277.5330.1221 ↗
10. Crystal structure of the orthorhombic U2-Al4Mg4Si4 precipitate in the Al–Mg–Si alloy system and its relation to the β' and β" phases10.1016/j.msea.2004.09.019 ↗
11. First-principles study of crystal structure and stability of Al–Mg–Si–(Cu) precipitates10.1016/j.actamat.2004.05.037 ↗
12. Hardness measurement of Al-Mg-Si alloy: experimentation and theoretical validation10.1007/s13632-022-00865-8 ↗
13. The crystal structure of the β' phase in Al–Mg–Si alloys10.1016/j.actamat.2007.02.032 ↗
14. Natural-aging-induced reversal of the precipitation pathways in an Al–Mg–Si alloy10.1016/j.scriptamat.2015.12.027 ↗
15. Low-alloy-correlated reversal of the precipitation sequence in Al-Mg-Si alloys10.1016/j.jallcom.2017.01.095 ↗
16. Structures and formation mechanisms of dislocation-induced precipitates in relation to the age-hardening responses of Al-Mg-Si alloys10.1016/j.jmst.2019.11.001 ↗
17. Microstructure and mechanical properties of Al-Mg-Si alloy during solution heat treatment and forging integrated forming process10.1016/j.matchar.2022.111762 ↗
18. Effect of natural aging on precipitation strengthening behaviors in Al-Mg-Si alloy10.3390/met12030470 ↗
19. Microstructural characteristics and deformation behaviors of an Al–Mg–Si alloy with improved strength and conductivity processed by continuous casting and expansion extrusion10.1016/j.jmrt.2022.11.156 ↗
20. Compressive creep aging behavior and microstructure evolution in extruded Al-Mg-Si alloy under different temperature and stress levels
21. Enhanced strength-conductivity trade-off in Al-Mg-Si alloys with optimized Mg/Si ratio10.1016/j.jallcom.2023.172682 ↗
22. Evaluation of precipitates and clusters during artificial aging of two model Al–Mg–Si alloys with different Mg/Si ratios10.1016/j.jallcom.2022.166978 ↗
23. Effect of pre-straining on structure and formation mechanism of precipitates in Al–Mg–Si–Cu alloy10.1016/S1003-6326(22)65805-9 ↗
24. The interactive effect of alloy composition and pre-straining on the precipitation behavior of Al–Mg–Si–Cu alloys10.1016/j.msea.2022.143495 ↗
25. Effects of Cu additions on the precipitation activation energy and mechanical properties of prestrained Al–Mg–Si alloys10.1016/j.jmrt.2022.08.037 ↗
26. Hierarchical nanostructures strengthen Al–Mg–Si alloys processed by deformation and aging10.1016/j.msea.2013.07.061 ↗
27. Effect of room-temperature pre-rolling and pre-cryorolling on natural aging and bake hardening response of an Al–Mg–Si Alloy10.1007/s11661-023-07150-5 ↗
28. Severe plastic deformation of Al–Mg–Si Alloys processed through rolling techniques: a review10.1007/s13632-022-00859-6 ↗
29. The effect of lattice misfits on the precipitation at dislocations: phase-field crystal simulation10.3390/ma16186307 ↗
30. Precipitation strengthening of Al-Mg-Si alloy subjected to multiple accumulative roll bonding combined with a heat treatment10.1016/j.matdes.2022.110813 ↗
31. An improved discrete tomography algorithm for reconstructing images with multiple gray levels10.1109/TIP.2022.3152632 ↗
32. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
33. Ab initio molecular dynamics for liquid metals10.1016/0022-3093(95)00355-X ↗
34. Accurate and simple analytic representation of the electron-gas correlation energy10.1103/PhysRevB.45.13244 ↗
35. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
36. A determination of the elastic constants for beta-quartz lehrbuch de kristallphysik
37. Calculation of the flow limits of mixed crystals on the basis of the plasticity of monocrystals
38. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
39. Structural evolution, mechanical properties, and electronic structure of Al–Mg–Si compounds from first principles10.1007/s10853-015-9209-4 ↗
40. Crystal structures and elastic properties of superhard IrN2 and IrN3 from first principles
41. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
42. First-principles study on the elastic properties of B' and Q phase in Al–Mg–Si (–Cu) alloys10.1088/0031-8949/87/01/015601 ↗
43. Impacts of microalloying elements on the hardening β"-phase in automotive AlMgSi alloys10.1007/s40195-022-01491-7 ↗
44. The principles and interpretation of annular dark-field Z-contrast imaging
45. Phase stability and structural relations of nanometer-sized, matrix-embedded precipitate phases in Al–Mg–Si alloys in the late stages of evolution10.1016/j.actamat.2006.02.034 ↗
46. The multiple orientation relationships and morphology of β' phase in Al-Mg-Si-Cu alloy10.1016/j.jallcom.2018.07.077 ↗
47. Pre-treatment to improve the bake-hardening response in the naturally aged Al-Mg-Si alloy10.1016/S1005-0302(11)60050-9 ↗
48. Low-temperature differential scanning calorimetry of an Al-Mg-Si alloy10.1007/s11661-010-0596-5 ↗
49. Atomic scale investigation of the crystal structure and interfaces of the B' precipitate in Al-Mg-Si alloys10.1016/j.actamat.2019.11.059 ↗
50. Special segregation of Cu on the habit plane of lath-like β' and QP2 precipitates in Al-Mg-Si-Cu alloys10.1016/j.scriptamat.2018.03.032 ↗