journal article·2024-03

Selective laser melting processing of heterostructured Ti6Al4V/FeCoNiCrMo alloy with superior strength and ductility

Yinuo Huang, Faming Zhang, Yifeng Xiong, Ting Dai, Qifa Wan

Publisher page

Abstract

In the selective laser melting (SLM) process, the transient nature of the molten pool and rapid cooling rate facilitates partial homogenization of components, resulting in attaining a finer scale concentration modulation and spatial heterostructure. However, the SLM-processed Ti6Al4V alloys have long suffered from the problem of both large detrimental columnar grains and poor work-hardening capacity. In this study, a high entropy alloy of FeCoNiCrMo particles was incorporated into the Ti6Al4V alloy and fabricated by the SLM technique. The resulting alloys exhibited a fine-scale modulated β + α` spatial heterostructure, delivering a notable tensile strength of 1366.4 MPa and a uniform elongation of approximately 8.7% with an excellent work-hardening capacity exceeding 300 MPa. This outstanding performance can be attributed to the progressive transformation-induced plasticity (TRIP) effect and hetero-deformation induced (HDI) strengthening within the ultra-refined α` martensite and metastable β phase regions. This work provided a compelling model of additive manufacture of heterogeneous structures while offering new insights and directions for the development of metallic materials with high strength-ductility characteristics.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Novel transformation pathway and heterogeneous precipitate microstructure in Ti-alloys10.1016/j.actamat.2020.06.048 ↗
2. Additive manufacturing of Ti6Al4V alloy: a review10.1016/j.matdes.2018.107552 ↗
3. Additive manufacturing of dense components in beta‑titanium alloys with crystallographic texture from a mixture of pure metallic element powders10.1016/j.matdes.2019.107771 ↗
4. Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: a review10.1016/j.ijmachtools.2018.06.003 ↗
5. Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys10.1080/14686996.2017.1361305 ↗
6. A systematic review of process uncertainty in Ti6Al4V-selective laser melting10.1016/j.cirpj.2021.12.005 ↗
7. Development of a high strength and high ductility near β-Ti alloy with twinning induced plasticity effect10.1016/j.scriptamat.2018.07.012 ↗
8. Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting10.1016/j.matdes.2016.06.117 ↗
9. Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate10.1016/j.actamat.2018.04.035 ↗
10. A new titanium alloy with a combination of high strength, high strain hardening and improved ductility10.1016/j.scriptamat.2014.09.005 ↗
11. Doubled strength and ductility via maraging effect and dynamic precipitate transformation in ultrastrong medium-entropy alloy10.1038/s41467-023-35863-z ↗
12. In situ design of advanced titanium alloy with concentration modulations by additive manufacturing10.1126/science.abj3770 ↗
13. Effect of scanning strategies on residual stress and mechanical properties of selective laser melted Ti6Al4V10.1016/j.msea.2017.11.103 ↗
14. Heterostructured materials10.1016/j.pmatsci.2022.101019 ↗
15. Laser additive manufacturing of titanium alloys with various Al contents10.1080/21663831.2023.2165418 ↗
16. Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting10.1016/j.actamat.2014.01.018 ↗
17. Microstructural engineering of a dual-phase Ti-Al-V-Fe alloy via in situ alloying during laser powder bed fusion
18. Loss-free tensile ductility of dual-structure titanium composites via an interdiffusion and self-organization strategy
19. Additive manufacturing of fine-grained high-strength titanium alloy via multi-eutectoid elements alloying10.1016/j.compositesb.2022.110399 ↗
20. High-entropy alloys10.1038/s41578-019-0121-4 ↗
21. Selective laser melting of lattice structures: a statistical approach to manufacturability and mechanical behavior10.1016/j.rcim.2017.06.006 ↗
22. Selective laser melting of Ti6Al4V alloy: process parameters, defects and post-treatments10.1016/j.jmapro.2021.01.009 ↗
23. Homogenization timing effect on microstructure and precipitation strengthening of 17–4PH stainless steel fabricated by laser powder bed fusion
24. Crystal growth mechanism and mechanical properties of Ti-6Al-4 V alloy during selective laser melting10.1016/j.matchar.2022.112455 ↗
25. The martensitic transformation and mechanical properties of Ti6Al4V prepared via selective laser melting10.3390/ma12020321 ↗
26. Superior titanium from hybridised microstructures – a new strategy for future alloys10.1016/j.scriptamat.2019.07.031 ↗
27. Designing against phase and property heterogeneities in additively manufactured titanium alloys
28. Design of titanium alloys by additive manufacturing: a critical review
29. Trifunctional nanoprecipitates ductilize and toughen a strong laminated metastable titanium alloy
30. In-situ tailoring microstructures to promote strength-ductility synergy in laser powder bed fusion of NiCoCr medium-entropy alloy10.1007/978-3-031-04721-3 ↗
31. Back-stress-induced strengthening and strain hardening in dual-phase steel10.1016/j.mtla.2019.100376 ↗
32. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
33. Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing10.1038/s41586-022-04914-8 ↗
34. Back stress strengthening and strain hardening in gradient structure10.1080/21663831.2016.1153004 ↗