journal article·2023-12

Design of novel Al-Mg-(Zn-Sc) alloys with enhanced mechanical properties and corrosion resistance

Long Jiang, Zhifeng Zhang, Yuelong Bai, Yabao Wang, Weimin Mao

Publisher page

Abstract

The novel Al-Mg-(Zn-Sc) alloys were fabricated using vacuum induction melting and argon-protected casting method. The effects of Zn and Sc on the microstructure evolution, mechanical properties and corrosion properties of the as-cast Al-Mg-(Zn-Sc) alloys were comparatively studied. The results show that the addition of 1.5 wt% Zn facilitates the evolution of coarsen β-Al 3Mg 2 phases into fine T-Mg 32(Al, Zn) 49 phases, enhancing the resistance to intergranular corrosion (IGC) of Al-5.5Mg-1.5Zn-0.4Sc (alloy 4) with a maximum corrosion depth of 133.4 µm. The addition of Zn also promotes Mg solid solution, resulting in a 13.7 % increase in Mg solid solution concentration in Al-5.5Mg-1.5Zn (alloy 3) compared to Al-5.5Mg (alloy 2). The addition of 0.4 wt% Sc leads to the formation of smaller (∼2 µm) Al 3 Sc particles with a larger volume fraction of 0.96 %, providing grain refinement and improved strength in the Al-Mg alloy. Furthermore, the joint addition of Zn and Sc elements reduces the grain size by 64.0 % compared to Al-5.0Mg (alloy 1) and increases the tensile strength by 33.5 %. Alloy 4 exhibits the greatest measured tensile strength of 343 MPa. The solid solution strengthening, grain boundary strengthening and precipitation strengthening contributions to alloy 4 are calculated at 76.8 MPa, 27.9 MPa and 66.6 MPa, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Microstructures and properties of 7A52 aluminum alloy welded joint by vapor plasma arc welding
2. Comparison between tungsten inert gas welded joints welded by commercial ER5183 filler and Al-Mg-Zn-Sc-Zr-Mn filler on microstructure and properties in 7075-T651 aluminum alloys10.2320/matertrans.MT-M2020295 ↗
3. Study on aluminum alloy joints welded with nano-treated Al-Mg-Mn filler wire10.1016/j.matlet.2020.128739 ↗
4. Effect of filler metal and post-weld friction stir processing on stress corrosion cracking susceptibility of Al-Zn-Mg arc welds10.1179/1362171814Y.0000000273 ↗
5. Investigation of mechanical properties and heat transfer of welded joint of AA6061 and AA7075 using TIG+FSP welding approach
6. Macroscopic segregation and stress corrosion cracking in 7xxx series aluminum alloy arc welds10.1007/s11661-015-2796-5 ↗
7. Annealing behavior of a modified 5083 aluminum alloy10.1016/j.matdes.2009.09.004 ↗
8. Effect of scandium on the microstructure and ageing behaviour of cast Al-6Mg alloy10.1016/j.matchar.2008.03.006 ↗
9. A survey of sensitization in 5xxx series aluminum alloys
10. Evolution of microstructure, mechanical properties and corrosion behavior of Al-4Mg-2Zn-0.3Ag (wt%) alloy processed by T6 or thermomechanical treatment10.1016/j.corsci.2021.109551 ↗
11. Direct visualization of β phase causing intergranular forms of corrosion in Al-Mg alloys10.1016/j.matchar.2013.03.014 ↗
12. Effects of solution treatment on the microstructure, tensile properties, and impact toughness of an Al-5.0Mg-3.0Zn-1.0Cu cast alloy10.1007/s40195-020-01077-1 ↗
13. The effect of electrode potential on stress corrosion cracking in highly sensitized Al-Mg alloys10.1016/j.msea.2019.138399 ↗
14. Enhanced ductility and strength in a cast Al-Mg alloy with high Mg content10.1016/j.msea.2021.140806 ↗
15. Revealing the influence of Fe on Fe-rich phases formation and mechanical properties of cast Al-Mg-Mn-Fe alloys10.1016/j.jallcom.2022.163666 ↗
16. Precipitation hardening and intergranular corrosion behavior of novel Al-Mg-Zn(-Cu) alloys10.1016/j.jallcom.2020.157199 ↗
17. Effects of homogenization on the microstructural evolution of a novel Zr and Er containing Al-Mg-Zn alloy10.1016/j.intermet.2023.107907 ↗
18. Effect of cryogenic environment on tensile property and microstructure evolution of an Al-Mg-Sc alloy10.1016/j.matchar.2022.112550 ↗
19. Mechanical properties, corrosion behavior and microstructure evolution of zinc and scandium co-strengthened 5xxx alloy
20. Microstructures and strengthening mechanisms of high Fe containing Al-Mg-Si-Mn-Fe alloys with Mg, Si and Mn modified10.1016/j.msea.2020.140477 ↗
21. Microstructural and mechanical behavior of Al-Mg-Mn-Sc-Zr alloy subjected to multi-axial forging at room temperature
22. Precipitation hardening behavior and microstructure evolution of Al-5.1Mg-0.15Cu alloy with 3.0Zn (wt%) addition10.1007/s10853-017-1811-1 ↗
23. Effects of homogenization on microstructures and properties of a new type Al-Mg-Mn-Zr-Ti-Er alloy10.1016/j.msea.2010.08.077 ↗
24. Study on Sc microalloying and strengthening mechanism of Al-Mg alloy
25. Enhanced SCC resistance of AA7005 welds with appropriate filler metal and post-welding heat treatment10.1016/j.tafmec.2010.06.011 ↗
26. Mechanical properties, intergranular corrosion behavior and microstructure of Zn modified Al-Mg alloys10.1016/j.jallcom.2014.08.099 ↗
27. Correlations between stress corrosion cracking, grain boundary precipitates and Zn content of Al-Mg-Zn alloys10.1016/j.jallcom.2015.09.159 ↗
28. Effects of Zn additions on the grain boundary precipitation and corrosion of Al-508310.1016/S1359-6462(99)00349-8 ↗
29. Effect of Sc and Zr additions on microstructures and corrosion behavior of Al-Cu-Mg-Sc-Zr alloys10.1016/j.jmst.2016.12.003 ↗
30. The effect of Cu and Sc on the localized corrosion resistance of Al-Zn-Mg-X alloys10.1016/j.jallcom.2019.05.189 ↗
31. Electrochemical characteristics of intermetallic phases in aluminum alloys10.1149/1.1869984 ↗
32. Influence of Mg on the corrosion of Al10.1116/1.582129 ↗
33. Precipitation hardening and intergranular corrosion behavior of novel Al-Mg-Zn(-Cu) alloys
34. Grain refinement in an Al-Mg-Sc alloy: equal channel angular pressing versus friction-stir processing10.1016/j.msea.2016.08.021 ↗
35. Achieve high ductility and strength in an Al-Mg alloy by severe plastic deformation combined with inter-pass annealing10.1016/j.msea.2013.12.103 ↗
36. On the origin of extremely high strength of ultrafine-grained Al alloys produced by severe plastic deformation10.1016/j.scriptamat.2010.07.014 ↗
37. Strengthening mechanisms in solid solution aluminum alloys10.1007/s11661-006-0142-7 ↗
38. Strengthening mechanisms of an Al-Mg-Sc-Zr alloy10.1016/S1359-6454(02)00258-6 ↗