Ti3SiC2 reinforced Inconel 625 composites prepared via laser directed energy deposition: New insights into microstructure evolution and mechanical properties
Source abstract
Abstract
In this study, the Ti 3SiC 2 /IN625 matrix composites was fabricated by laser directed energy deposition technology(LDED). The microstructure evolution and mechanical properties of the fabricated Ti 3SiC 2/ IN625 composites were studied. The results show that Ti 3SiC 2 decomposes in the high temperature melt pool due to its unique crystal structure and then combines with the segregated Nb and Mo elements to generate a large number of fine-sized particle and rod-like carbides. The dendrite growth of the composite becomes more disordered and the primary dendrite spacing of the composites is also reduced. Compared with IN625, the tensile strength of composites at room temperature and high temperature (650 °C) were increased by 10.7 % and 20.6 %, respectively. The improvement in strength of the composite was attributed to the increase of precipitated phase and the effect of grain refinement. In addition, the diffusely distributed second phase promoted recovery and recrystallization at high temperature, which made the plasticity ability of composites increasing. This work provides a new idea for the preparation of high temperature nickel-based compound materials by LDED.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Microstructure characteristics of inconel 625 superalloy manufactured by selective laser melting10.1016/j.jmst.2014.09.020 ↗
2. Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: Tailored microstructures and enhanced performance10.1016/j.msea.2015.03.043 ↗
3. A.C. To, Additive manufacturing of nickel-based superalloys: a state-of-the-art review on process-structure-defect-property relationship10.1016/j.pmatsci.2023.101108 ↗
4. Application of alloy 718 in GE aircraft engines: past, present and next five years
5. Nickel based superalloy welding practices for industrial gas turbine applications10.1179/136217104225017099 ↗
6. Materials for additive manufacturing10.1016/j.cirp.2017.05.009 ↗
7. Electron and laser-based additive manufacturing of Ni-based superalloys: a review of heterogeneities in microstructure and mechanical properties10.1016/j.matdes.2022.111245 ↗
8. An overview of additive manufacturing of titanium components by directed energy deposition: microstructure and mechanical properties10.3390/app7090883 ↗
9. Bhavar · 2014
10. Laser metal deposition for powder metallurgy parts10.1179/174329011X12977874589924 ↗
11. The future of metals10.1126/science.1185866 ↗
12. Metal matrix composites10.1146/annurev-matsci-070909-104511 ↗
13. Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures10.1016/j.optlastec.2013.05.011 ↗
14. Microstructure and fracture behavior of TiC particles reinforced Inconel 625 composites prepared by laser additive manufacturing10.1016/j.jallcom.2017.10.280 ↗
15. Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: Tailored microstructures and enhanced performance10.1016/j.msea.2015.03.043 ↗
16. Influence of the TiB2 content on the processability, microstructure and high-temperature tensile performance of a Ni-based superalloy by laser powder bed fusion10.1016/j.jallcom.2022.164656 ↗
17. Microstructure and properties of Ni-WC gradient composite coating prepared by laser cladding10.1016/j.ceramint.2021.11.338 ↗
18. An approach for fabricating Ni@graphene reinforced nickel matrix composites with enhanced mechanical properties10.1016/j.msea.2017.12.101 ↗
19. Morphologies, microstructures and properties of TiC particle reinforced Inconel 625 coatings obtained by laser cladding with wire10.1016/j.jallcom.2017.12.298 ↗
20. Exploring the interfacial state and tensile behaviors in nickel matrix composite with in-situ TiC and γ′-Ni3(Al,Ti) reinforcements10.1016/j.jallcom.2018.06.308 ↗
21. Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC10.1016/j.surfcoat.2012.07.058 ↗
22. Microstructure evolution, mechanical properties, and strengthening mechanism of TiC reinforced Inconel 625 nanocomposites fabricated by selective laser melting10.1016/j.msea.2020.139655 ↗
23. Exploring the interfacial state and tensile behaviors in nickel matrix composite with in-situ TiC and gamma '-Ni-3(Al,Ti) reinforcements10.1016/j.jallcom.2018.06.308 ↗
24. Electronic and structural properties of the layered ternary carbide Ti3AlC210.1039/b101520f ↗
25. Tensile properties of Ti3SiC2 in the 25–1300°C temperature range10.1016/S1359-6454(99)00351-1 ↗
26. W. Yang, L. Xiu-bo, O. ChunSheng, L. Ying-she, C. De-qiang. Preparation and Tribological Research Progress of Ternary Layered Solid Lubricating Material Ti3SiC2 and Its Composites, 2020.
27. Electronic structure and bonding properties in layered ternary carbide Ti3SiC210.1088/0953-8984/12/28/102 ↗
28. Microstructure evolution and high-temperature tribological behavior of Ti3SiC2 reinforced Ni60 composite coatings on 304 stainless steel by laser cladding10.1016/j.surfcoat.2021.127335 ↗
29. Influence of Ti3SiC2 content on tribological properties of NiAl matrix self-lubricating composites10.1016/j.matdes.2012.08.060 ↗
30. Modeling solute redistribution and microstructural development in fusion welds of Nb-bearing superalloys10.1016/S1359-6454(98)00123-2 ↗
31. W. Xiao, S. Li, C. Wang, Y. Shi, J. Mazumder, H. Xing, L. Song, Multi-scale simulation of dendrite growth for direct energy deposition of nickel-based superalloys, Mater. Des.
32. Synthesis of Ti3SiC2 in air using mechanically activated 3Ti/Si/2C powder10.1016/j.jallcom.2008.06.147 ↗
33. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
34. On the role of carbides during the recrystallization of a directionally solidified nickel-base superalloy10.1016/j.scriptamat.2006.05.013 ↗
35. The Hall-Petch and inverse Hall-Petch relations and the hardness of nanocrystalline metals10.1007/s10853-019-04160-w ↗
36. TiB2 reinforced aluminum based in situ composites fabricated by stir casting10.1016/j.msea.2014.12.033 ↗
37. Microstructural evolution and mechanical behavior of ultrasonically synthesized Al6061-nano alumina composites10.1016/j.msea.2018.03.092 ↗
38. Numerical analysis of the load-bearing capacity of brick masonry walls strengthened with textile reinforced mortar and subjected to eccentric compressive loading10.1016/j.engstruct.2015.02.032 ↗