journal article·2023-12

Experimental and first-principles calculation study on influence of stacking faults on hardness and anisotropy of M7C3 carbides

Baoyu Geng, Peichang Deng, Youchi Li, Jiezhen Hu

Publisher page

Abstract

M7C3 often exhibits stacking faults (SFs). However, the influence of SFs on carbide properties are rarely studied. To explore effects of SFs, the carbide hardness, elastic modulus, and distribution of hardness and elastic modulus in the grain were analyzed using nanoindentation technology. The SFs structure of M7C3 carbides was analyzed using transmission electron microscopy (TEM). First-principles calculations revealed the influence mechanism of SFs on carbide hardness. The results showed that high-density SFs improved the carbide hardness by approximately 2 GPa. Uneven distribution of SFs leads to uneven hardness and elastic modulus of M7C3 carbides. The SFs disrupt the ordered arrangement of C-Cr bonds, which reduces the anisotropy of Cr7C3. The change in carbide strength was not due to the change in bond strength. Instead, the lattice distortion caused by the change in the C-Cr bond angle in Cr7C3-SFs increased the deformation resistance of the crystal and improved the hardness of Cr7C3.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Effects of Y dopant on mechanical properties and electronic structures of M7C3 carbide in Fe-Cr-C hardfacing coating
2. Tailoring M7C3 carbide via electron work function-guided modification10.1016/j.scriptamat.2020.09.002 ↗
3. Effect of Nb additive on wear resistance and tensile properties of the hypereutectic Fe-Cr-C hardfacing alloy
4. Tailoring the anisotropic mechanical properties of hexagonal M7×3 (M=Fe, Cr, W, Mo; X=C, B) by multialloying10.1016/j.actamat.2019.03.015 ↗
5. Understanding effects of Cr content on the slurry erosion behavior of high-Cr cast irons through local property mapping and computational analysis10.1016/j.wear.2016.12.031 ↗
6. Elaborating the phases and mechanical properties of multiphase alloy: experimental two-dimensional mapping combined with theoretical calculations10.1016/j.matchar.2017.11.005 ↗
7. The nature of stacking faults within iron-chromium carbide of the type (Fe, Cr)7C310.1016/j.jallcom.2009.12.197 ↗
8. Stacking faults in chromium, iron and vanadium mixed carbides of the type M 7C 3
9. Direct observation of domain structures and interface dislocations in M7C3 by high-resolution electron microscopy10.1080/01418619108205586 ↗
10. Observations of non-periodic and periodic defect structures in M7C3 carbides10.1080/01418618708204469 ↗
11. Crystalline defects in M7C3carbides10.1080/01418618308234895 ↗
12. Etude microstructurale de carbures M7C310.1107/S0021889883009863 ↗
13. Examination of M 7C 3 carbides in high chromium cast irons using thin foil transmission electron microscopy10.1007/BF00723685 ↗
14. Stacking faults and superlattice observations during transmission electron microscopy of a (Fe,Cr)7C3 carbide10.1016/S0167-577X(03)00343-4 ↗
15. Nanoscale stacking fault–assisted room temperature plasticity in flash-sintered TiO 210.1126/sciadv.aaw5519 ↗
16. High temperature deformability of ductile flash-sintered ceramics via in-situ compression10.1038/s41467-018-04333-2 ↗
17. The scientific questions and technological opportunities of flash sintering: From a case study of ZnO to other ceramics10.1016/j.scriptamat.2017.12.006 ↗
18. Two-step flash sintering of ZnO: Fast densification with suppressed grain growth10.1016/j.scriptamat.2017.07.015 ↗
19. Beyond flash sintering in 3 mol% yttria stabilized zirconia10.2109/jcersj2.15248 ↗
20. Formation of high-density stacking faults in ceramic films induced by Ti transition layer10.1016/j.scriptamat.2021.114496 ↗
21. Extrinsic size dependent plastic deformability of ZnS micropillars
22. XRD and electron microscope study of an as-cast 26.6% chromium white iron microstructure10.1016/j.matchemphys.2003.11.037 ↗
23. Change in primary (Cr, Fe)7C3 carbides induced by electric current pulse modification of hypereutectic high chromium cast iron melt10.3390/ma12010032 ↗
24. Microstructure and crystallography of M7C3 carbide in chromium cast iron10.1016/j.matchemphys.2015.05.008 ↗
25. The relationship between fracture mechanism and substructures of primary M7C3 under the hot compression process of self-healing hypereutectic high chromium cast iron10.1016/j.msea.2020.139150 ↗
26. Plastic deformation behaviors and hardening mechanism of M7C3 carbide10.1016/j.msea.2016.03.062 ↗
27. Formation mechanism of stacking faults and its effect on hardness in M7C3 carbides10.1016/j.matchar.2020.110691 ↗
28. Analysis of evolution law and mechanism of stacking fault density of M7C3 carbides under the action of the electric current pulse10.1016/j.matchar.2022.112117 ↗
29. Self-consistent equations including exchange and correlation effects10.1103/PhysRev.140.A1133 ↗
30. First-principles simulation: ideas, illustrations and the CASTEP code10.1088/0953-8984/14/11/301 ↗
31. Soft self-consistent pseudopotentials in a generalized eigenvalue formalism10.1103/PhysRevB.41.7892 ↗
32. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
33. Special points for brillouin-zone integrations
34. Anisotropic elasticity and thermal conductivities of (α, β, γ)-LiAlSi2O6 from the first-principles calculation10.1016/j.jallcom.2018.05.040 ↗
35. Anisotropic elastic and thermal properties of titanium borides by first-principles calculations10.1016/j.jallcom.2013.06.119 ↗
36. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
37. Modeling hardness of polycrystalline materials and bulk metallic glasses10.1016/j.intermet.2011.03.026 ↗
38. Nanoindentation mapping defects filtration for heterogeneous materials using generative adversarial networks10.1016/j.matchar.2022.112107 ↗
39. Microstructural and crystallographical study of carbides in 30wt%Cr cast irons10.1016/j.actamat.2005.05.019 ↗
40. Characterization of elevated-temperature high strength and decent thermal conductivity extruded Mg-Er-Y-Zn alloy containing nano-spaced stacking faults10.1016/j.matchar.2019.109823 ↗
41. Q.Q.J. A, X.H.S. A, L.X.Y. A, Y.T.Z. A, B.Z. A, S.J.Z. B, X.L.M. A, Stacking faults and growth twins in long-period stacking ordered structures in a near-equilibrium Mg 97 Zn 1 Y 2 alloy, Mater. Charact., 165.
42. First-principles study of structural, elastic, and electronic properties of chromium carbides10.1063/1.2838345 ↗
43. The carbide M7C3 in low-temperature-carburized austenitic stainless steel10.1016/j.actamat.2010.11.058 ↗
44. Mechanical properties and chemical bonding characteristics of Cr7C3 type multicomponent carbides10.1063/1.3532038 ↗
45. M.I. Naher, S.H. Naqib, Possible applications of Mo2C in the orthorhombic and hexagonal phases explored via ab-initio investigations of elastic, bonding, optoelectronic and thermophysical properties, (2022).10.2139/ssrn.4023189 ↗
46. Universal elastic anisotropy index10.1103/PhysRevLett.101.055504 ↗
47. Density functional theory for calculation of elastic properties of orthorhombic crystals: application to TiSi 210.1063/1.368733 ↗
48. Mechanical and optical properties of Cs 4 BX 6 (B = Pb, Sn; X = Cl, Br, I) zero dimension perovskites10.1021/acs.jpcc.7b10629 ↗
49. Alloying effect on phase stability, elastic and thermodynamic properties of Nb-Ti-V-Zr high entropy alloy10.1016/j.intermet.2018.08.003 ↗
50. Nye · 1985
51. Population analysis of plane-wave electronic structure calculations of bulk materials10.1103/PhysRevB.54.16317 ↗