Hot deformation behavior and dynamic recrystallization of dual-phase (CrCoNi)94Al3Ta3 medium entropy alloy
Source abstract
Abstract
The microstructural evolution and dynamic recrystallization (DRX) behavior of a dual-phase (CrCoNi) 94Al 3Ta 3 medium entropy alloy (MEA) was studied using thermal simulated test machine at temperature ranging from 1000 ℃ to 1150 ℃ under strain rate of 0.001–1 s −1. The initial dual-phase microstructures were equiaxed grains with face-centered cubic structure (γ) and L1 2 phase (γ`) precipitated homogeneously in the grain, besides a certain amount pinned at boundary. The stress-strain curves exhibited a typical DRX softening behavior, in which the flow stress was sensitive to deformation temperature and strain rate. The deformation activation energy was calculated to be 612.04 kJ/mol (γ + γ` dual-phase region) and 391.02 kJ/mol (γ single-phase region) respectively. The appropriate hot deformation parameters of (CrCoNi) 94Al 3Ta 3 MEA were 1100 ℃/0.001 s −1 and 1150 ℃/0.01 s −1 based on the hot processing map and deformation microstructure. The discontinuous DRX transformed to continuous DRX depended on deformation temperature, this was because that the interaction between precipitates and dislocation was weakened as the deformation temperature beyond the dissolution temperature of L1 2 phase.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Quantitative nanostructure and hardness evolution in duplex stainless steels: under real low-temperature service conditions10.1007/s11661-021-06547-4 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Alloy design strategies and future trends in high-entropy alloys10.1007/s11837-013-0761-6 ↗
4. Recent advances and outstanding challenges for implementation of high entropy alloys as structural materials
5. Corrosion behavior of AlCoCrFeNi2.1 eutectic high-entropy alloy in Cl--containing solution
6. Atomistic understanding of incipient plasticity in BCC refractory high entropy alloys10.1016/j.jallcom.2022.166058 ↗
7. Designing CoCrFeNi-M (M = Nb, Ta, Zr, and Hf) eutectic high-entropy alloys via a modified simple mixture method10.1016/j.jallcom.2023.168975 ↗
8. Effect of microstructural evolution on corrosion behavior of Al0.7Cr2FeCoNi high-entropy alloy10.1016/j.jallcom.2023.170757 ↗
9. Cryogenic tensile behavior of laser additive manufactured CoCrFeMnNi high entropy alloys10.1016/j.jallcom.2023.169062 ↗
10. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
11. Effect of hot isostatic pressing on the cryogenic mechanical properties of CrCoNi medium entropy alloy processed by direct energy deposition10.1016/j.msea.2021.142110 ↗
12. Real-time nanoscale observation of deformation mechanisms in CrCoNi-based medium- to high-entropy alloys at cryogenic temperatures10.1016/j.mattod.2019.03.001 ↗
13. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
14. Effects of cryogenic temperature and grain size on fatigue-crack propagation in the medium-entropy CrCoNi alloy10.1016/j.actamat.2020.09.021 ↗
15. High impact toughness of CrCoNi medium-entropy alloy at liquid-helium temperature10.1016/j.scriptamat.2019.07.010 ↗
16. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
17. Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy10.1038/s41467-020-16085-z ↗
18. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
19. Unique hot deformation behavior and microstructure evolution of a dual FCC-phase CoCrCu1.2FeNi high entropy alloy10.1016/j.jallcom.2021.160102 ↗
20. Hot deformation behavior and processing maps of an equiatomic MoNbHfZrTi refractory high entropy alloy10.1016/j.intermet.2020.106921 ↗
21. Hot deformation behavior and processing map of a Sn0.5CoCrFeMnNi high entropy alloy with dual phases
22. Hot deformation behaviors of an ultrafine-grained MoNbTaTiV refractory high-entropy alloy fabricated by powder metallurgy10.1016/j.msea.2021.140922 ↗
23. High-temperature deformation mechanisms and processing maps of equiatomic CoCrFeMnNi high-entropy alloy10.1016/j.msea.2019.04.057 ↗
24. Mechanism of grain refinement in an equiatomic medium-entropy alloy CrCoNi during hot deformation10.1016/j.jallcom.2019.152382 ↗
25. Hot deformation behavior and flow stress modeling of a novel CoNibased wrought superalloy10.1016/j.jallcom.2021.162489 ↗
26. Hot deformation behavior and workability of a Ni-Co based superalloy10.1016/j.jallcom.2020.154618 ↗
27. Hot deformation behavior and processing workability of a Ni-based alloy10.1016/j.jallcom.2018.08.010 ↗
28. Hot deformation behavior and microstructural evolution of as-quenched 7055 Al alloy fabricated by powder hot extrusion10.1016/j.matchar.2019.109833 ↗
29. Correlation between Zener–Hollomon parameter and necklace DRX during hot deformation of 316 stainless steel10.1016/j.msea.2008.09.073 ↗
30. Study on the microstructure evolution and dynamic recrystallization mechanism of selective laser melted Inconel 718 alloy during hot deformation10.1016/j.vacuum.2022.111799 ↗
31. Effect of the Zener-Hollomon parameter on the dynamic recrystallization kinetics of Mg–Zn–Zr–Yb magnesium alloy10.1016/j.commatsci.2019.05.015 ↗
32. A ductile fracture model considering stress state and Zener–Hollomon parameter for hot deformation of metallic materials10.1016/j.ijmecsci.2018.06.030 ↗
33. Research on hot deformation behavior and constitutive model to predict flow stress of an annealed FeCrCuNi2Mn2 high-entropy alloy10.1016/j.jallcom.2022.168267 ↗
34. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
35. EBSD study of microstructure evolution during axisymmetric hot compression of 304LN stainless steel10.1016/j.msea.2017.11.059 ↗
36. Dynamic behaviour of 304 stainless steel during high Z deformation10.1016/j.msea.2010.12.093 ↗
37. Hot deformation behavior of austenitic stainless steel for a wide range of initial grain size10.1016/j.msea.2013.01.050 ↗
38. Effects of Cr addition on the constitutive equation and precipitated phases of copper alloy during hot deformation10.1016/j.matdes.2020.108613 ↗
39. Hot deformation and dynamic recrystallization behavior of a Cu-9Ni-6Sn-0.04Cr alloy
40. Hot deformation behavior and microstructural evolution of the Al-Cu-Li alloy: A study with processing map10.1016/j.jallcom.2022.167755 ↗
41. A CDRX-based material model for hot deformation of aluminium alloys10.1016/j.ijplas.2020.102844 ↗
42. Constitutive equation and dynamic recovery mechanism of high strength cast Al-Cu-Mn alloy during hot deformation
43. Microstructure evolution and physical-based diffusion constitutive analysis of Al-Mg-Si alloy during hot deformation
44. High temperature deformation behavior and dynamic recrystallization in CoCrFeNiMn high entropy alloy10.1016/j.msea.2015.03.097 ↗
45. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
46. Microstructural development during hot working of Mg-3Al-1Zn10.1007/s11661-007-9207-5 ↗
47. Effects of strain amount and strain rate on grain structure of a novel high Co nickel-based polycrystalline superalloy10.1016/j.matdes.2017.06.004 ↗
48. Utilization of hot deformation to trigger strain induced boundary migration (SIBM) in Ni-base superalloys10.1016/j.msea.2018.02.062 ↗
49. The B2 phase-driven microstructural heterogeneities and twinning enable ultrahigh cryogenic strength and large ductility in NiCoCr-based medium-entropy alloy10.1016/j.actamat.2022.117981 ↗