Effect of Mo alloying on vacancy-defect evolution and irradiation damage in titanium alloy
Source abstract
Abstract
The evolution of defects and irradiation damage in Ti and Ti-Mo alloy under hydrogen ion irradiation were investigated by slow positron-beam doppler broadening spectroscopy (DBS) and coincidence doppler broadening spectroscopy (CDB), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The XRD results indicate that the existence of the β phase enhances the solid solubility of hydrogen in Ti-Mo alloy. The metastable γ-TiH hydrides are formed in pure titanium after hydrogen ion irradiation, while no hydride is found in Ti-Mo alloy under the same irradiation conditions. Moreover, DBS and CDB results show that hydrogen vacancy-complexes are formed in Ti and Ti-Mo alloys after hydrogen ion irradiation. Calculated doppler curves trend qualitatively agrees well with the experimental results. The TEM results show lower defect concentration and smaller defect sizes in Ti-Mo alloy with (α + β) than pure titanium. The addition of molybdenum significantly refines the grains and increases the density of the interface, which plays an important role in the management of irradiation-induced defects.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Nuclear Materials and Properties · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Effects of different annealing cooling methods on the microstructure and properties of TA10 titanium alloys10.1016/j.jmrt.2022.04.149 ↗
2. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications10.1016/j.msec.2019.04.064 ↗
3. An overview on the use of titanium in the aerospace industry10.1016/0921-5093(96)10233-1 ↗
4. Influence of thermal treatment on element partitioning in α+β titanium alloy10.1016/j.jallcom.2019.03.332 ↗
5. Changes in the microstructure and mechanical properties of Ti–6Al–4V alloys induced by Fe ion irradiation at a high He generation rate
6. Use of titanium in fusion components10.1016/0022-3115(94)90168-6 ↗
7. Formation of vacancy-type defects and hydride introduced by irradiation in pure titanium10.1016/j.jmrt.2022.12.010 ↗
8. Synergies between H, He and radiation damage in dual and triple ion irradiation of candidate fusion blanket materials
9. Precipitation of supersaturated solute in H ion irradiated Fe-Au and Fe-Au-W alloys studied by positron annihilation spectroscopy10.1016/j.nimb.2021.06.022 ↗
10. Effect of Applied Potential to Control Bacterial Adhesion on Titanium a Condenser Material of Nuclear Power Plants
11. Perspectives on Titanium Science and Technology10.1016/j.actamat.2012.10.043 ↗
12. Hydrogen trapping in 3D-printed (additive manufactured) Ti-6Al-4V10.1016/j.matchar.2018.07.029 ↗
13. The Hydrogen Embrittlement of Titanium-Based Alloys
14. Effect of Molybdenum (Mo) Addition on Phase Composition, Microstructure, and Mechanical Properties of Pre-Alloyed Ti6Al4V Using Spark Plasma Sintering Technique10.3390/molecules26102894 ↗
15. Microstructures, mechanical properties, and irradiation tolerance of the Ti-Zr-Nb-V-Mo refractory high-entropy alloys10.1016/j.intermet.2023.107873 ↗
16. In situ positron beam Doppler broadening measurement of ion-irradiated metals - Current status and potential10.1016/j.nimb.2012.05.005 ↗
17. Positron annihilation spectroscopy investigation of defects in neutron irradiated tungsten materials
18. Effects of hydrogen charging and deformation on tensile properties of a multi-component alloy for nuclear applications10.1007/s42864-022-00148-3 ↗
19. Mechanism of hydrogen-induced defects and cracking in Ti and Ti–Mo alloy10.1016/j.ijhydene.2022.11.119 ↗
20. Formation of hydrogen-induced vacancies during growth of the Fe layer studied by slow positron beam
21. Thermal evolution of irradiation defects in ferritic/martensitic steel during isochronal annealing10.1016/j.nimb.2018.08.044 ↗
22. Investigation of vacancy-type defects in helium irradiated FeCrNi alloy by slow positron beam10.1016/j.jnucmat.2014.12.070 ↗
23. Positron annihilation Doppler broadening spectroscopy study on Fe-ion irradiated NHS steel10.1016/j.nimb.2014.11.051 ↗
24. Ion beam-based coincidence Doppler broadening spectroscopy of positron annihilation radiation: The experiences of Tehran Van de Graaff lab10.1016/j.nimb.2022.03.001 ↗
25. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
26. PROJECTOR AUGMENTED-WAVE METHOD10.1103/PhysRevB.50.17953 ↗
27. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
28. Defect identification in semiconductors with positron annihilation: Experiment and theory10.1103/RevModPhys.85.1583 ↗
29. ELECTRON-POSITRON DENSITY-FUNCTIONAL THEORY10.1103/PhysRevB.34.3820 ↗
30. Modeling the momentum distributions of annihilating electron-positron pairs in solids10.1103/PhysRevB.73.035103 ↗
31. ELECTRON-POSITRON CAR-PARRINELLO METHODS - SELF-CONSISTENT TREATMENT OF CHARGE-DENSITIES AND IONIC RELAXATIONS10.1103/PhysRevB.52.10947 ↗
32. Theoretical and experimental study of positron annihilation with core electrons in solids10.1103/PhysRevB.54.2397 ↗
33. Formation and time dynamics of hydrogen-induced vacancies in nickel10.1016/j.actamat.2021.117264 ↗
34. Study of surface damage and hydrogen distribution in irradiated tungsten by protons in plasma focus device
35. Calculation of water equivalent ratio of several dosimetric materials in proton therapy using FLUKA code and SRIM program10.1016/j.apradiso.2014.03.012 ↗
36. Evaluation of effective threshold displacement energies and other data required for the calculation of advanced atomic displacement cross-sections10.1016/j.nucet.2017.08.007 ↗
37. Solar wind sputtering of wollastonite as a lunar analogue material – Comparisons between experiments and simulations10.1016/j.icarus.2018.05.028 ↗
38. Note on the artefacts in SRIM simulation of sputtering10.1016/j.apsusc.2018.01.039 ↗
39. Formation mechanism of hydride precipitation in commercially pure titanium10.1016/j.jmst.2021.01.009 ↗
40. Surface and phase transformation characteristics of titanium hydride film under irradiation of pulsed ion beam10.1016/j.apsusc.2013.08.093 ↗
41. Formation of a tetragonal phase hydride in Ti–Mo–H system10.1016/j.jallcom.2007.03.090 ↗
42. Microstructure, defect structure and hydrogen trapping in zirconium alloy Zr-1Nb treated by plasma immersion Ti ion implantation and deposition10.1016/j.jallcom.2017.10.151 ↗
43. Helium / hydrogen synergistic effect in reduced activation ferritic / martensitic steel investigated by slow positron beam10.1080/14786435.2015.1131901 ↗
44. Exploration of vacancy defect formation and evolution in low-energy ion implanted pure titanium10.1016/j.ijhydene.2021.12.192 ↗
45. Designing radiation resistance in materials for fusion energy10.1146/annurev-matsci-070813-113627 ↗
46. Comparative study of radiation damage accumulation in Cu and Fe10.1016/S0022-3115(99)00220-2 ↗
47. Tensile behavior of dual-phase titanium alloys under high-intensity proton beam exposure: Radiation-induced omega phase transformation in Ti-6Al-4V
48. Effects of Mo equivalent on the phase constituent, microstructure and compressive mechanical properties of Ti-Nb-Mo-Ta alloys prepared by powder metallurgy10.1016/j.jmrt.2021.12.054 ↗
49. Diffusivities and atomic mobilities in bcc Ti–Mo–Ta alloys
50. First-principles study of hydrogen-vacancy complexes in Be12Ti10.1016/j.jnucmat.2019.07.020 ↗
51. Neutron irradiation effects on the microstructural development of tungsten and tungsten alloys10.1016/j.jnucmat.2015.10.047 ↗
52. Helium irradiation-induced swelling resistance of heterogeneous nanoparticles in an iron-based multi-principal element alloy
53. Sensitivity of positrons at hydrogen storage sites in FeCr alloy containing vacancy and helium atom10.1016/j.ijhydene.2020.04.025 ↗
54. Positron beam Doppler broadening spectra and nano-hardness study on helium and hydrogen irradiated RAFM steel10.1016/j.radphyschem.2014.09.004 ↗
55. Defect structures of F82H irradiated at SINQ using positron annihilation spectroscopy10.1016/j.jnucmat.2015.03.055 ↗
56. Helium/hydrogen synergistic effect in reduced activation ferritic/martensitic steel investigated by slow positron beam
57. Effect of electrochemical hydrogen charging on defect structure in titanium
58. Characteristics of titanium–hydrogen solid solution10.1016/j.jallcom.2004.04.132 ↗
59. Hydrogen behaviors in molybdenum and tungsten and a generic vacancy trapping mechanism for H bubble formation10.1016/j.jnucmat.2012.12.008 ↗
60. Defect microstructure of a Ti64 alloy under TI2+ ion irradiation. Influence of dose and temperature