journal article·2023-12

Syringeless electrospun non-woven separator membrane for high-energy and high-power Li-ion battery application

Jimi Kim, Shinyoung Lee, Woo-Jin Song, Kyung Jin Lee

Publisher page

Abstract

Developing separators to meet the various requirements of next-generation Li-ion batteries (LIBs) is quite challenging because safety issues (good mechanical and thermal properties) and high power and energy density (small thickness and large porosity) exhibit a negative correlation, resulting in a technical contradiction. In general, an electrospun nonwoven membrane is a potential candidate for use in next-generation LIBs, but sufficiently thin electrospun-based nonwoven webs cannot be used as separators owing to their poor mechanical properties and exceedingly large porosity, which fail to prevent dendrite growth. To overcome these shortcomings, we fabricated a composite nonwoven separator using polyvinylidene fluoride (PVDF) and lithium lanthanum zirconium oxide (Li 6.4La 3Zr 2Al 0.2O 12 , LLZO) particles via a syringeless colloidal electrospinning method. To demonstrate the feasibility of our separator membrane for use in high-power and high-energy LIBs, we evaluated the electrochemical performance of an assembled LiNi 0.6Co 0.2Mn 0.2O 2 (NCM622)/graphite cell at a high C-rate. The assembled cell containing our separator membrane delivered an outstanding capacity of 115 mAh∙g -1 with a capacity retention of 97% after 100 cycles, even at 3 C. In addition, a Li-metal cell with our PVDF/LLZO separator achieved capacity retention of 86% after 250 cycles at 0.5 C.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. L. Ye, Y. Zheng, N.A. Khan, X. Ni, K.A. Zhang, Y. Shen, N. Huang, X.Y. Kong, Emerging covalent triazine frameworks-based nanomaterials for electrochemical energy storage and conversion, Chem. commun. (2023).10.1039/D3CC00712J ↗
2. CsPbBr3 quantum dots-decorated porous covalent triazine frameworks nanocomposites for enhanced solar-driven H2O2 production10.1016/j.coco.2022.101390 ↗
3. Nitrogen-doped carbon spheres with precisely-constructed pyridinic-N active sites for efficient oxygen reduction10.1016/j.apsusc.2022.153786 ↗
4. An outlook on lithium ion battery technology10.1021/acscentsci.7b00288 ↗
5. Towards fast-charging high-energy lithium-ion batteries: from nano- to micro-structuring perspectives10.1016/j.cej.2022.140003 ↗
6. A review on doping/coating of nickel-rich cathode materials for lithium-ion batteries10.1016/j.jallcom.2019.153048 ↗
7. Foldable electrode architectures based on silver-nanowire-wound or carbon-nanotube-webbed micrometer-scale fibers of polyethylene terephthalate mats for flexible lithium-ion batteries10.1002/adma.201705445 ↗
8. Design of fire‐resistant liquid electrolyte formulation for safe and long‐cycled lithium‐ion batteries10.1002/adfm.202106102 ↗
9. Probing depth-dependent inhomogeneous lithium concentration in thick LiNi0.88Co0.09Al0.03O2 cathodes for lithium-ion batteries10.1016/j.jallcom.2023.169029 ↗
10. Preparation of graphene by exfoliation and its application in lithium-ion batteries10.1016/j.jallcom.2023.170885 ↗
11. Jabuticaba-inspired hybrid carbon filler/polymer electrode for use in highly stretchable aqueous Li-Ion Batteries10.1002/aenm.201702478 ↗
12. Galvanically replaced, single‐bodied lithium‐ion battery fabric electrodes10.1002/adfm.201908633 ↗
13. Lithium-ion battery fast charging: a review10.1016/j.etran.2019.100011 ↗
14. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
15. Improving battery safety by early detection of internal shorting with a bifunctional separator10.1038/ncomms6193 ↗
16. High-voltage operation by mechanical interlocking adhesion of nickel-rich cathode and functional separator in lithium-ion batteries10.1016/j.cej.2022.138159 ↗
17. Stabilizing electrodeposition in elastic solid electrolytes containing immobilized anions10.1126/sciadv.1600320 ↗
18. Recent advances on separator membranes for lithium-ion battery applications: from porous membranes to solid electrolytes, Energy Stor
19. Prospects of LLZO type solid electrolyte: from material design to battery application10.1016/j.cej.2022.140375 ↗
20. Improved performance of all-solid-state lithium metal batteries via physical and chemical interfacial control
21. Highly stretchable separator membrane for deformable energy-storage devices10.1002/aenm.201801025 ↗
22. Highly improved thermal stability of the ceramic coating layer on the polyethylene separator via chemical crosslinking between ceramic particles and polymeric binders10.1016/j.cej.2022.134501 ↗
23. High performance ceramic-coated separators prepared with lithium ion-containing SiO2 particles for lithium-ion batteries10.1016/j.jpowsour.2012.10.082 ↗
24. Polyphenols assisted silica coating on polypropylene separators with improved wettability and heat-resistance for lithium-ion batteries10.1002/app.47277 ↗
25. Thermostable and nonflammable polyimide/zirconia compound separator for lithium-ion batteries with superior electrochemical and safe properties10.1016/j.jcis.2022.06.096 ↗
26. A review of electrospun nanofiber-based separators for rechargeable lithium-ion batteries10.1016/j.jpowsour.2019.227262 ↗
27. Lithium-ion battery separators based on electrospun PVDF: A review
28. Shutdown-functionalized nonwoven separator with improved thermal and electrochemical properties for lithium-ion batteries10.1016/j.jpowsour.2015.11.106 ↗
29. Freestanding hybrid electrospun membranes consisting of TiO2 nanotube-core nanocarbon as high-performance and long-lifespan anodes for lithium-ion batteries10.1016/j.jallcom.2023.171026 ↗
30. Preparation of poly-1-butene nanofiber mat and its application as shutdown layer of next generation lithium ion battery10.3390/polym12102267 ↗
31. Cross-linked cellulose/carboxylated polyimide nanofiber separator for lithium-ion battery application10.1016/j.cej.2021.133934 ↗
32. Structure–performance relationships of Li-Ion battery fiber-based separators10.1021/acsapm.2c00216 ↗
33. Electrospun polyimide nanofiber-based nonwoven separators for lithium-ion batteries10.1016/j.jpowsour.2012.10.027 ↗
34. Electrospun polyimide-composite separator for lithium-ion batteries10.1016/j.electacta.2015.04.142 ↗
35. Assembling zinc cobalt hydroxide/ternary sulfides heterostructure and iron oxide nanorods on three-dimensional hollow porous carbon nanofiber as high energy density hybrid supercapacitor10.1016/j.est.2023.106713 ↗
36. Application of electrospun nonwoven fibers in air filters10.3390/fib10020015 ↗
37. Poly(vinylidene fluoride)/SiO2 composite membranes prepared by electrospinning and their excellent properties for nonwoven separators for lithium-ion batteries10.1016/j.jpowsour.2013.11.079 ↗
38. Electrospun MOF/PAN composite separator with superior electrochemical performances for high energy density lithium batteries10.1016/j.electacta.2021.138346 ↗
39. Electrospun fluorinated polyimide/polyvinylidene fluoride composite membranes with high thermal stability for lithium ion battery separator10.1007/s42765-021-00093-9 ↗
40. The high performances of SiO2 /Al2O3-coated electrospun polyimide fibrous separator for lithium-ion battery10.1016/j.memsci.2015.06.016 ↗
41. An electrolyte-locked thermally stable composite separator for safe lithium ion batteries10.1016/j.jallcom.2022.168543 ↗
42. Overview on theoretical simulations of lithium‐ion batteries and their application to battery separators10.1002/aenm.202203874 ↗
43. Mass production of functional amine-conjugated PAN nanofiber mat via syringeless electrospinning and CVD10.1002/mame.201700565 ↗
44. Syringeless electrospinning toward versatile fabrication of nanofiber web10.1038/srep41424 ↗
45. Syringeless electrospinning of PVDF/SiO2 as separator membrane for high-performance lithium-ion batteries10.1016/j.matchemphys.2022.126354 ↗
46. Colloid syringeless electrospinning toward nonwoven nanofiber web containing a massive amount of inorganic fillers10.1002/mame.202100818 ↗
47. Modified Li7La3Zr2O12 (LLZO) and LLZO-polymer composites for solid-state lithium batteries
48. Elastic and well-aligned ceramic LLZO nanofiber based electrolytes for solid-state lithium batteries, Energy Stor
49. 3D coral-like LLZO/PVDF composite electrolytes with enhanced ionic conductivity and mechanical flexibility for solid-state lithium batteries10.1021/acsami.0c15004 ↗
50. Nano-web scaffold of ferroelectric beta-PVDF fibers for lithium metal plating and stripping
51. Significance of ferroelectric polarization in poly (vinylidene difluoride) binder for high-rate Li-ion diffusion10.1016/j.nanoen.2016.12.037 ↗
52. SPVdF-HFP/SGO nanohybrid proton exchange membrane for the applications of direct methanol fuel cells10.1080/01932691.2019.1660672 ↗
53. Cubic phases of garnet-type Li7La3Zr2O12: the role of hydration10.1039/c3ta11996c ↗
54. Flexible, mechanically robust, solid-state electrolyte membrane with conducting oxide-enhanced 3d nanofiber networks for lithium batteries10.1021/acs.nanolett.1c01704 ↗
55. Metamorphosis of seaweeds into multitalented materials for energy storage applications10.1002/aenm.201900570 ↗
56. Fabrication and characterization of SiO2/PVDF composite nanofiber-coated PP nonwoven separators for lithium-ion batteries10.1002/polb.23387 ↗
57. Advanced performance and ultra-high, long-term durability of acid-base blended membranes over 900 h containing sulfonated PEEK and quaternized poly(arylene ether sulfone) in H2/O2 fuel cells10.1016/j.compositesb.2023.110558 ↗
58. Novel porous separator based on PVdF and PE non-woven matrix for rechargeable lithium batteries10.1016/j.jpowsour.2004.06.055 ↗
59. SiO2/polyacrylonitrile membranes via centrifugal spinning as a separator for Li-ion batteries10.1016/j.jpowsour.2014.10.015 ↗
60. Enhanced performance of solid-state lithium-air batteries with continuous 3D garnet network added composite polymer electrolyte10.1016/j.jpowsour.2020.228146 ↗
61. Designing anti‐swelling nanocellulose separators with stable and fast ion transport channels for efficient aqueous zinc‐ion batteries
62. Low resistance-integrated all-solid-state battery achieved by Li7La3Zr2O12 nanowire upgrading polyethylene oxide (PEO) composite electrolyte and PEO cathode binder10.1002/adfm.201805301 ↗
63. A review of recent developments in membrane separators for rechargeable lithium-ion batteries10.1039/C4EE01432D ↗
64. Ceramic nanoparticle-decorated melt-electrospun PVDF nanofiber membrane with enhanced performance as a lithium-ion battery separator10.1021/acsomega.9b01541 ↗
65. Nanoparticle-on-nanofiber hybrid membrane separators for lithium-ion batteries via combining electrospraying and electrospinning techniques10.1016/j.memsci.2014.01.022 ↗
66. A nano-silica/polyacrylonitrile/polyimide composite separator for advanced fast charging lithium-ion batteries10.1016/j.cej.2020.128075 ↗
67. An integrated separator/anode assembly based on electrospinning technique for advanced lithium-ion batteries10.1016/j.electacta.2021.138776 ↗
68. High-performance separator for lithium-ion battery based on dual-hybridizing of materials and processes10.1016/j.cej.2021.133773 ↗
69. Electrospun nanofiber separator derived from nano-SiO2-modified polyimide with superior mechanical flexibility for high-performance lithium-ion battery10.1007/s10853-021-06201-9 ↗
70. Sulfophenylated poly (Ether Ether Ketone Ketone) nanofiber composite separator with excellent electrochemical performance and dimensional thermal stability for lithium‐ion battery via electrospinning10.1002/mame.202100118 ↗
71. Enhanced performance of high energy density lithium metal battery with PVDF-HFP/LAGP composite separator10.1021/acsaem.0c03162 ↗
72. A nano-silica modified polyimide nanofiber separator with enhanced thermal and wetting properties for high safety lithium-ion batteries10.1016/j.memsci.2017.05.023 ↗
73. Multicore-shell nanofiber architecture of polyimide/polyvinylidene fluoride blend for thermal and long-term stability of lithium ion battery separator10.1038/srep36977 ↗