journal article·2023-10

The effect of different strain on the structural and optical properties of multilayer γ-InSe

Zhanbiao Huangfu, Junbo Wang, Xuerui Cheng, Shiquan Feng, Yongfu Liang, Chaosheng Yuan, Xiang Zhu, Zheng Wang, Huanjun Zhang, Kun Yang

Publisher page

Abstract

Strain engineering is one promising approach to tune electronic and optical properties of 2D materials. But which type mechanical strain is most efficient is unclear. Here we systematically investigate and compare the tuning effect from four different type strains for multilayer γ-InSe, including in-plane uniaxial tensile strain, in-plane biaxial tensile strain, hydrostatic compressive strain and out-of-plane axial compressive strain. The evolution of its phonon modes and luminescent properties upon strain were investigated using in situ Raman and photoluminescence (PL) spectroscopy. All phonon modes exhibit blue shift upon compression strain, while red shift upon tensile strain. Band gap reduction was observed for both compression strain and tensile strain. Strain type has great effect on the shift rate of Raman mode and band gap. Among four types strain, biaxial tensile strain exhibits the largest shift rates, being 8.49, 9.24 and 8.65 cm -1 /% for three phonon modes and 85 meV/% for band gap. It suggests that biaxial tensile strain is more efficient for γ-InSe. This result is helpful for practical strain-based manipulation for 2D materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 2D Materials and Applications · MXene and MAX Phase Materials · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. 2D material broadband photodetectors10.1039/C9NR09070C ↗
2. First principle insights on mechanical, electronic and optical properties of direct bandgap material Cs2KScX6 (X= Cl, Br and I) for optoelectronic applications10.1016/j.jssc.2022.123590 ↗
3. An effect of metal ions (Cu, Mn) doping on the structural, morphological, optical, photoluminescence, electrical and photocatalytic properties of In2S3 nanoparticles10.1016/j.optmat.2021.111769 ↗
4. Interfaces, improved optical and electrical properties of Fe doped ZnO nanostructures facilely deposited by low-cost SILAR method for photosensor applications, Surf
5. Abnormal intensity and polarization of Raman scattered light at edges of layered MoS210.1007/s12274-022-4256-z ↗
6. Enhancement of photoluminescence and hole mobility in 1-to 5-layer InSe due to the top valence-band inversion: strain effect10.1039/C8NR03172J ↗
7. High pressure studies of 2D materials and heterostructures: a review10.1016/j.matdes.2021.110363 ↗
8. Strain of 2D materials via substrate engineering10.1016/j.cclet.2021.07.001 ↗
9. Strain-induced effects on the electronic properties of 2D materials10.1177/1847980420902569 ↗
10. Structural, morphological, optical and enhanced photodetection activities of CdO films: an effect of Mn doping10.1016/j.sna.2020.112531 ↗
11. Temperature-dependent phase transition: structural, optical, magnetic and dielectric properties of La2CuO4 perovskite nanoparticles10.1007/s10854-022-09301-7 ↗
12. A comparative study on NiFe2O4 and ZnFe2O4 spinel nanoparticles: structural, surface chemistry, optical, morphology and magnetic studies10.1016/j.physb.2022.414232 ↗
13. Wafer-scale synthesis of high-quality semiconducting two-dimensional layered InSe with broadband photoresponse10.1021/acsnano.7b01168 ↗
14. Modulation of electronic properties of monolayer InSe through strain and external electric field10.1016/j.chemphys.2018.09.022 ↗
15. Largely tunable band structures of few-layer InSe by uniaxial strain10.1021/acsami.7b17247 ↗
16. Drastic enhancement of the Raman intensity in few-layer InSe by uniaxial strain10.1103/PhysRevB.99.195414 ↗
17. Enhanced light emission from the ridge of two-dimensional InSe flakes10.1021/acs.nanolett.8b01940 ↗
18. Giant piezoresistive effect and strong bandgap tunability in ultrathin InSe upon biaxial strain10.1002/advs.202001645 ↗
19. Thermoelectric performance of monolayer InSe improved by convergence of multivalley bands10.1063/1.5040752 ↗
20. Strain effect on thermoelectric performance of InSe monolayer10.1186/s11671-019-3113-9 ↗
21. Effects of the in-plane uniaxial and biaxial strains on the structural and electronic properties of the monolayer ZrS2: a first-principles investigation10.1016/j.tsf.2022.139343 ↗
22. Ultrasensitive tunability of the direct bandgap of 2D InSe flakes via strain engineering10.1088/2053-1583/aaa6eb ↗
23. Ab-initio simulations of monolayer InSe and MoS2 strain effect: from electron mobility to photoelectric effect10.1007/s11664-019-07809-z ↗
24. Theoretical prediction of intrinsic electron mobility of monolayer InSe: first-principles calculation10.1088/1361-648X/ab534f ↗
25. The direct-to-indirect band gap crossover in two-dimensional van der Waals Indium Selenide crystals10.1038/srep39619 ↗
26. Layer number-dependent raman spectra of γ‑InSe10.1021/acs.jpclett.2c00504 ↗
27. Raman spectroscopy of GaSe and InSe post-transition metal chalcogenides layers10.1039/D0FD00007H ↗
28. S. Liu, N. Huo, S. Gan, Y. Li, Z. Wei, B. Huang, J. Liu, J. Li, H.J.Jo.M.C.C. Chen, Thickness-dependent Raman spectra, transport properties and infrared photoresponse of few-layer black phosphorus, 3 (2015) 10974–10980.10.1039/C5TC01809A ↗
29. Thickness-dependent differential reflectance spectra of monolayer and few-layer MoS2, MoSe2, WS2 and WSe210.3390/nano8090725 ↗
30. Transition from parabolic to ring-shaped valence band maximum in few-layer GaS, GaSe, and InSe10.1103/PhysRevB.90.235302 ↗
31. Thickness-dependent phase transition and optical behavior of MoS2 films under high pressure10.1007/s12274-017-1696-y ↗
32. Using strain to alter the energy bands of the monolayer MoSe2: a systematic study covering both tensile and compressive states10.1016/j.apsusc.2020.146398 ↗
33. The optical properties of few-layer InSe10.1063/5.0018480 ↗
34. Enhancement of electronic and optoelectronic performance of multilayer InSe via strain engineering10.1088/1361-6641/ab73e9 ↗
35. Increasing doping solubility of RE3+ ions in fergusonite BiVO4 via pressure-induced phase transition10.1021/acs.jpcc.1c07746 ↗
36. Pressure-induced phase transition in α-and β-BiNbO410.1039/D2CP03040C ↗
37. Pressure-induced structural transformations and new polymorphs in BiVO410.1039/D0CP01274B ↗
38. Contrasting structural stabilities and new pressure-induced polymorphic transitions of scheelite-and zircon-type ZrGeO410.1021/acs.jpcc.6b10916 ↗
39. Experimental and theoretical study of band structure of InSe andIn1−xGaxSe(x<0.2)under high pressure:direct to indirect crossovers10.1103/PhysRevB.63.125330 ↗
40. Engineering near-infrared light emission in mechanically exfoliated InSe platelets through hydrostatic pressure for multicolor microlasing10.1021/acs.nanolett.2c01127 ↗
41. Strongly tunable raman resonance in InSe under pressure10.1021/acs.jpcc.2c00913 ↗
42. Biaxial versus uniaxial strain tuning of single-layer MoS210.1016/j.nanoms.2021.03.001 ↗