journal article·2023-10

Preparation of Co-nanocluster graphene composite by asymmetric domain-limited electrochemical exfoliation for functionalized lithium-sulfur battery separator applications

Zeyuan Shi, Zehao Shi, Bo Gao, Juntai Yin, Zhuang Liu, Lei Wang

Publisher page

Abstract

Transition metal nanocluster graphene composite exhibits better performance in energy storage materials than heteroatom graphene composite. In catalytic function separator materials for lithium-sulfur batteries, the introduction of functionalized graphene into asymmetric separators effectively seals and anchors soluble polysulfides, largely mitigating the notorious “shuttle effect”. Here, we report the development of a novel asymmetric domain-limited electrochemical (ALE) exfoliation of graphite foils (natural-scaled graphite) to prepare Co-nanocluster graphene composite nanosheets (labeled as Co-G). Co-G has a large lateral size, many surface folds, and few intrinsic defects (I D/I G = 0.38). Co-nanocluster graphene composite promotes redox kinetic conversion, and its high electronic conductivity allows it to act as a second collector, accelerating charge transfer, improving the utilization of active material, and increasing cyclic stability. A lithium-sulfur battery incorporating a Co-G modified separator achieved an initial discharge capacity of 1315.5 mAh/g at 0.5 C with excellent multiplicity performance (932.3 mAh/g specific capacity at 2 C multiplicity) and cycling stability (848.4 mAh/g after 400 cycles). The asymmetric domain-limited electrochemical (ALE) method is a viable approach to the preparation of catalytic function separator materials for lithium-sulfur batteries that will have high magnification and high cyclic stability.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Porous hollow carbon@sulfur composites for high-power lithium-sulfur batteries10.1002/anie.201100637 ↗
2. Two-Dimensional porous sandwich-like C/Si-Graphene-Si/C nanosheets for superior lithium storage10.1021/acsami.7b11721 ↗
3. Two-dimensional porous carbon-coated sandwich-like mesoporous SnO2/graphene/mesoporous SnO2 nanosheets towards high-rate and long cycle life lithium-ion batteries10.1016/j.cej.2018.08.217 ↗
4. Materials challenges and opportunities of lithium ion batteries10.1021/jz1015422 ↗
5. Rechargeable lithium-sulfur batteries10.1021/cr500062v ↗
6. Donor dominated triazine-based microporous polymer as a polysulfide immobilizer and catalyst for high-performance lithium-sulfur batteries10.1016/j.cej.2019.123694 ↗
7. Melamine foam derived 2H/1T MoS2 as flexible interlayer with efficient polysulfides trapping and Fast Li+ diffusion to stabilize Li-S batteries10.1021/acsami.0c19725 ↗
8. Li-O2 and Li-S batteries with high energy storage10.1038/nmat3191 ↗
9. “Pea-pod-like” nitrogen-doped hollow porous carbon cathode hosts decorated with polar titanium dioxide nanocrystals as efficient polysulfide reservoirs for advanced lithium–sulfur batteries10.1039/C8TA06288A ↗
10. Achieving three-dimensional lithium sulfide growth in lithium-sulfur batteries using high-donor-number anions10.1038/s41467-018-07975-4 ↗
11. Challenges for rechargeable li batteries10.1021/cm901452z ↗
12. CeO2 decorated graphene as separator modification material for capture and boost conversion of polysulfide in lithium-sulfur batteries10.1016/j.memsci.2020.118780 ↗
13. Hydrophilic binder enabling strongly anchoring polysulfides for high‐performance sulfur electrodes in lithium‐sulfur battery
14. Highly dispersed catalytic Co3S4 among a hierarchical carbon nanostructure for high-rate and long-life lithium-sulfur batteries10.1021/acsnano.8b07843 ↗
15. Enhanced Catalytic Conversion of Polysulfides Using Bimetallic Co7Fe3 for High-Performance Lithium-Sulfur Batteries10.1021/acsnano.0c04054 ↗
16. Trimming the π bridge of microporous frameworks for bidentate anchoring of polysulfides to stabilize lithium–sulfur batteries10.1039/D0TA06383E ↗
17. Freestanding 1T MoS2/graphene heterostructures as a highly efficient electrocatalyst for lithium polysulfides in Li–S batteries10.1039/C8EE03252A ↗
18. Multifunctional reaction interfaces for capture and boost conversion of polysulfide in lithium-sulfur batteries10.1016/j.electacta.2020.135658 ↗
19. Review of carbon materials for lithium-sulfur batteries10.1002/slct.201703112 ↗
20. Lithiated defect sites in Zr metal-organic framework for enhanced sulfur utilization in Li-S batteries10.1021/acsami.8b19034 ↗
21. Advances in Li–S batteries10.1039/b925751a ↗
22. Separator modified by cobalt‐embedded carbon nanosheets enabling chemisorption and catalytic effects of polysulfides for high‐energy‐density lithium‐sulfur batteries10.1002/aenm.201901609 ↗
23. Elaborate interface design of CoS2/Fe7S8/NG heterojunctions modified on a polypropylene separator for efficient lithium-sulfur batteries10.1016/j.cej.2022.136990 ↗
24. A thermoregulating separator based on black phosphorus/MOFs heterostructure for thermo-stable lithium-sulfur batteries10.1016/j.cej.2022.140250 ↗
25. Polyaniline encapsulated amorphous V2O5 nanowire-modified multi-functional separators for lithium-sulfur batteries10.1002/smtd.202001056 ↗
26. Bipolar anodic electrochemical exfoliation of graphite powders10.1016/j.elecom.2019.06.001 ↗
27. Synergetic effects of Fe-N-C and LiFePO4 in modified separator on improved adsorption and catalytic conversion reaction of soluble LiPSs for Lithium-sulfur batteries10.1016/j.cej.2022.141264 ↗
28. Honeycomb-Like spherical cathode host constructed from hollow metallic and polar Co9S8 tubules for advanced lithium-sulfur batteries10.1002/adfm.201704443 ↗
29. Preparation of graphene sheets by electrochemical exfoliation of graphite in confined space and their application in transparent conductive films10.1021/acsami.7b09891 ↗
30. Silicon nanoparticles embedded in N-Doped few-layered graphene: facile synthesis and application as an effective anode for lithium ion batteries10.1002/cplu.201900390 ↗
31. Electrochemical mass production of graphene nanosheets for arsenic removal from aqueous solutions10.1016/j.matlet.2019.04.115 ↗
32. Production of few-layer graphene structures in different modes of electrochemical exfoliation of graphite by voltage pulses10.1080/10739149.2019.1607750 ↗
33. Synthesis of graphene materials by electrochemical exfoliation: Recent progress and future potential10.1002/cey2.14 ↗
34. Advanced lithium ion sulfur battery based on spontaneous electrochemical exfoliation/lithiation of graphite in nonaqueous electrolytes10.1021/acsaem.9b00480 ↗
35. Multi-role p-styrene sulfonate assisted electrochemical preparation of functionalized graphene nanosheets for improving fire safety and mechanical property of polystyrene composites10.1016/j.compositesb.2019.107544 ↗
36. Constructing multi-functional Janus separator toward highly stable lithium batteries10.1016/j.ensm.2020.03.004 ↗
37. Preparation of N‐doped graphene powders by cyclic voltammetry and a potential application of them: anode materials of Li‐ion batteries10.1002/er.4618 ↗
38. Hierarchically porous, ultrathin N–doped carbon nanosheets embedded with highly dispersed cobalt nanoparticles as efficient sulfur host for stable lithium–sulfur batteries10.1016/j.jechem.2020.03.014 ↗
39. Co nanoparticles anchored on the Co-Nx active centers grafted nitrogen-doped graphene with enhanced performance for lithium-sulfur battery10.1016/j.jallcom.2021.161552 ↗
40. Efficient separators with fast Li-ion transfer and high polysulfide entrapment for superior lithium-sulfur batteries10.1016/j.cej.2020.127348 ↗
41. Co-N/KB porous hybrid derived from ZIF-67/KB as a separator modification material for lithium-sulfur batteries10.1016/j.electacta.2021.138282 ↗
42. Nitrogen-Doped CoSe2 as a bifunctional catalyst for high areal capacity and lean electrolyte of Li–S battery10.1021/acsenergylett.0c01564 ↗
43. Phosphorus-doped graphene nanosheets anchored with cerium oxide nanocrystals as effective sulfur hosts for high performance lithium-sulfur batteries10.1039/C9NR03278A ↗
44. The progress of Li–S batteries—understanding of the sulfur redox mechanism: dissolved polysulfide ions in the electrolytes10.1002/admt.201700233 ↗
45. A multifunctional SnO2-nanowires/carbon composite interlayer for high-performance lithium-sulfur batteries10.1016/j.cej.2020.126042 ↗
46. In situ Raman spectroscopy of sulfur speciation in lithium-sulfur batteries10.1021/am5072942 ↗
47. Honeycomb-Like nitrogen-doped carbon 3D nanoweb@Li2S cathode material for use in lithium sulfur batteries10.1002/cssc.201802698 ↗
48. Core-shell polyhedrons of carbon nanotubes-grafted graphitic carbon@nitrogen doped carbon as efficient sulfur immobilizers for lithium-sulfur batteries10.1016/j.apsusc.2018.04.123 ↗
49. Sulfur immobilization by “Chemical Anchor” to suppress the diffusion of polysulfides in lithium-sulfur batteries10.1002/admi.201701274 ↗
50. Co/Co3O4-embedded N-doped hollow carbon composite derived from a bimetallic MOF/ZnO Core-shell template as a sulfur host for Li-S batteries10.1016/j.cej.2020.126967 ↗