journal article·2023-10

Nickel-embedded hierarchically-porous carbon microspheres as a multifunctional separator modifier for achieving advanced lithium-sulfur batteries

Zhifei Liu, Chunxiang Lu, Shuxia Yuan, Xiaodan Ren, You Chen

Publisher page

Abstract

Lithium-sulfur batteries (LSBs), one of the most promising electrochemical energy storage systems, are in the spotlight due to their high theoretical energy density, alongside environmental friendliness and low cost of sulfur. Several unforgiving issues, however, hamper their commercial applications, such as the notorious shuttle effect of intermediary polysulfides and retarded redox kinetics, growth of dendritic Li, among other things. The crux of sorting out the problems above is designing a versatile material with good electrical conductivity, catalytic activity, together with abilities in suppression of polysulfide shuttling and Li dendrite growth. In this work, a composite of Ni nanoparticles embedded in the gradient-porous carbon microspheres (Ni/PCMS), acting like a miniature reactor, was fabricated as a separator modification material. Adequate electron conductivity can be guaranteed by the carbon substrate and the inlays of Ni nanoparticles. The physical/chemical adsorption and high Li + transference number of Ni/PCMS assure suppressed shuttle effect and Li dendrite growth, respectively. Catalytic activity is fulfilled with the exposed Ni active sites. As a consequence, the batteries based on Ni/PCMS-modified separators achieve a high initial discharge capacity of 1426.7 mAh g −1 at 0.1 C and a low capacity fading rate of 0.078% per cycle over 800 cycles at 1 C. Even under a high sulfur mass loading of ∼ 3.0 mg cm −2, the battery still displays a superior rate performance of 555.6 mAh g −1 at 0.5 C. This work provides a thought for the rational design of a wide range of separator modifiers for high-performance Li-S batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. Influence of cycle capacity deterioration and storage capacity deterioration on Li-ion batteries used in mobile phones10.1016/j.jpowsour.2004.10.007 ↗
2. Commercialization of lithium battery technologies for electric vehicles10.1002/aenm.201900161 ↗
3. Materials challenges and opportunities of lithium ion batteries10.1021/jz1015422 ↗
4. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
5. Environmentally compatible lead-free perovskite solar cells and their potential as light harvesters in energy storage systems10.3390/nano11082066 ↗
6. Advances in high-voltage supercapacitors for energy storage systems: materials and electrolyte tailoring to implementation10.1039/D2NA00863G ↗
7. Rational design of binders for stable Li-S and Na-S batteries10.1002/adfm.201907931 ↗
8. Lithium-sulfur batteries for commercial applications10.1016/j.chempr.2017.12.012 ↗
9. Structural design of cathodes for Li-S batteries10.1002/aenm.201500124 ↗
10. Nanostructured sulfur cathodes10.1039/c2cs35256g ↗
11. The progress of Li-S batteries-understanding of the sulfur redox mechanism: dissolved polysulfide ions in the electrolytes10.1002/admt.201700233 ↗
12. A special core-shell ZnS-CNTs/S@NH cathode constructed to elevate electrochemical performances of lithium-sulfur batteries10.1016/j.jcis.2021.04.063 ↗
13. Employing synergetic effect of ZnSe quantum dots and layered Ni(OH)2 to boost the performance of lithium-sulfur cathodes10.1088/1361-6528/ac2982 ↗
14. Cocklebur-like ZnSe-VO2@rGO nanostructures as host to boost the performance of lithium-sulfur batteries10.1016/j.jallcom.2022.167975 ↗
15. Sandwich-type CoSe2-CNWs@rGO/S composites with efficient trapping and catalytic conversion of polysulfides in lithium-sulfur batteries10.1039/D2DT01774A ↗
16. Synthesis of nickel@N-doped carbon nanotube foams for high sulfur-loading lithium-sulfur battery10.1016/j.jallcom.2022.166263 ↗
17. Insights into nickel nanoparticles modified porous biomass-derived carbon as sulfur host matrix for advanced rechargeable lithium-sulfur battery10.1016/j.jallcom.2022.168459 ↗
18. Recent progress of separators in lithium-sulfur batteries10.1016/j.ensm.2021.05.034 ↗
19. A review of transition metal compounds as functional separators for lithium-sulfur batteries
20. High-performance lithium-sulfur batteries achieved by a multifunctional SiO2-nanotubes carbon composite interlayer10.1016/j.jallcom.2021.162580 ↗
21. SiO2 hollow nanotubes composite aramid fiber interlayer for absorbtion of polysulfides in highly stable lithium-sulfur batteries10.1016/j.vacuum.2021.110684 ↗
22. Improving the electrochemical performance of lithium-sulfur batteries by interface modification with a bifunctional electrolyte additive10.1016/j.cej.2022.136489 ↗
23. Electrolyte issues in lithium-sulfur batteries: development, prospect, and challenges10.1021/acs.energyfuels.1c00990 ↗
24. Rational design of nanostructured functional interlayer/separator for advanced Li-S batteries10.1002/adfm.201707411 ↗
25. A flexible sulfur-graphene-polypropylene separator integrated electrode for advanced Li-S batteries10.1002/adma.201404210 ↗
26. High-performance Li-S batteries with an ultra-lightweight MWCNT-coated Separator10.1021/jz5006913 ↗
27. Silica-templated hierarchically porous carbon modified separators for lithium-sulfur batteries with superior cycling stabilities10.1016/j.jpowsour.2019.227462 ↗
28. Smaller sulfur molecules promise better lithium-sulfur batteries10.1021/ja308170k ↗
29. Synergistically enhanced polysulfide chemisorption using a flexible hybrid separator with N and S dual-doped mesoporous carbon coating for advanced lithium-sulfur batteries10.1021/acsami.6b03642 ↗
30. Nitrogen-doped microporous carbon from polyaspartic acid bonding separator for high performance lithium-sulfur batteries10.1016/j.jelechem.2017.03.004 ↗
31. Rational design of graphene @ nitrogen and phosphorous dual-doped porous carbon sandwich-type layer for advanced lithium-sulfur batteries10.1007/s10853-017-1029-2 ↗
32. Rational design of exfoliated 1T MoS2@CNT-based bifunctional separators for lithium sulfur batteries10.1039/C7TA08153G ↗
33. Carbon microspheres with embedded FeP nanoparticles as a cathode electrocatalyst in Li-S batteries10.1016/j.cej.2020.126823 ↗
34. Realizing Li-S batteries with efficient polysulfide trapping and conversion by using a high-nitrogen-content-coped Fe-N-C porous carbon nanosheet-modified separator10.1002/slct.202201484 ↗
35. A trifunctional modified separator based on Fe tetraaminophthalocyanine@rGO for lithium-sulfur batteries10.1016/j.cej.2020.126947 ↗
36. Fe-N-doped carbon nanofiber and graphene modified separator for lithium-sulfur batteries10.1016/j.cej.2017.09.186 ↗
37. A multifunctional separator modified with cobalt and nitrogen co-doped porous carbon nanofibers for Li-S batteries10.1016/j.memsci.2017.11.026 ↗
38. Facile and low-cost preparation of Co and N co-doped hierarchical porous carbon as a functional separator for Li-S batteries10.1016/j.electacta.2021.139380 ↗
39. Catalytic separators with Co-N-C nanoreactors for high-performance lithium-sulfur batteries10.1039/D1QI00205H ↗
40. Application of Ni-MOF derived Ni-C composite on separator modification for Li-S batteries10.1016/j.jelechem.2022.116029 ↗
41. Nickel-based metal-organic framework-derived Ni/NC/KB as a separator coating for high capacity lithium-sulfur batteries10.1039/D1SE01368H ↗
42. A dual-regulation strategy of B/N codoped CNT-encapsulated Ni nanoparticles as a catalytic host and separator coating promises high-performance Li-S batteries10.1007/s11431-021-2019-4 ↗
43. Synergistic effect of adsorption and electrocatalysis of CoO/NiO heterostructure nanosheet assembled nanocages for high-performance lithium-sulfur batteries10.1039/D2TA06876A ↗
44. Co3O4@MWCNT modified separators for Li-S batteries with improved cycling performance
45. Ultra-small ferromagnetic Fe3O4 nanoparticles modified separator for high-rate and long cycling lithium-sulfur batteries10.1002/batt.202200020 ↗
46. Cobalt nitride nanocrystals coated separator as multifunctional interlayer for improving polysulfides regulation10.1016/j.jallcom.2022.165964 ↗
47. Conductive Fe2N/N-rGO composite boosts electrochemical redox reactions in wide temperature accommodating lithium-sulfur batteries
48. A multi-shelled CoP nanosphere modified separator for highly efficient Li-S batteries10.1039/C8NR03854F ↗
49. CoP/C nanocubes-modified separator suppressing polysulfide dissolution for high-rate and stable lithium-sulfur batteries10.1021/acsami.9b18723 ↗
50. A 3D porous FeP/rGO modulated separator as a dual-function polysulfide barrier for high-performance lithium sulfur batteries10.1039/C9NH00532C ↗
51. A thin and multifunctional CoS@g-C3N4/Ketjen black interlayer deposited on polypropylene separator for boosting the performance of lithium-sulfur batteries10.1016/j.jcis.2021.09.122 ↗
52. FeS2 intercalated montmorillonite as a multifunctional separator coating for high-performance lithium-sulfur batteries10.1039/D2QI02324E ↗
53. CoS-interposed and Ketjen black-embedded carbon nanofiber framework as a separator modulation for high performance Li-S batteries10.1016/j.cej.2019.03.034 ↗
54. Towards high-performance lithium-sulfur batteries: the modification of polypropylene separator by 3D porous carbon structure embedded with Fe3C/Fe nanoparticles10.1007/s40242-021-1386-x ↗
55. Fe3C-N-doped carbon modified separator for high performance lithium-sulfur batteries10.1016/j.jechem.2019.01.019 ↗
56. Mott-Schottky electrocatalyst selectively mediates the sulfur species conversion in lithium-sulfur batteries10.1016/j.jcis.2022.11.041 ↗
57. Ultrathin nanosheet-assembled flowerlike NiSe2 catalyst boosts sulfur redox reaction kinetics for Li-S batteries10.1021/acsaem.0c03189 ↗
58. Metal-organic framework-derived NiSe2 Nanoparticles on graphene for polysulfide conversion in lithium-sulfur batteries10.1021/acsanm.2c01370 ↗
59. Reduced graphene oxide@CoSe2 interlayer as anchor of polysulfides for high properties of lithium-sulfur battery10.1007/s10853-019-03571-z ↗
60. Monodispersed colloidal spheres: old materials with new applications10.1002/(SICI)1521-4095(200005)12:10<693::AID-ADMA693>3.0.CO;2-J ↗
61. Micro/nano-scaled carbon spheres based on hydrothermal carbonization of agarose10.1016/j.colsurfa.2015.08.019 ↗
62. Mesoporous carbon-carbon nanotube-sulfur composite microspheres for high-areal-capacity lithium-sulfur battery cathodes10.1021/am4035784 ↗
63. Simple fabrication of Ni nanodots decorated Ni/Ketjen black composite for sulfur host in lithium-sulfur battery10.1002/er.7379 ↗
64. Hierarchical interconnected expanded graphitic ribbons embedded with amorphous carbon: an advanced carbon nanostructure for superior lithium and sodium storage10.1002/smll.201802221 ↗
65. Deciphering the defect micro-environment of graphene for highly efficient Li-S redox reactions10.1002/eom2.12182 ↗
66. Synergistic capture and conversion of soluble polysulfides in Li-S batteries with composite freestanding carbonaceous interlayers10.1021/acsami.1c24540 ↗
67. Effect of zinc-based active sites on porous carbon and electrochemical properties in lithium-sulfur batteries10.1016/j.jallcom.2022.164182 ↗
68. Porous nitrogen-doped carbon nanofibers assembled with nickel nanoparticles for lithium-sulfur batteries10.1039/C8NR07220E ↗
69. Conductivity and transference number measurements on polymer electrolytes10.1016/0167-2738(88)90304-9 ↗
70. In situ grown ZIF67 particles on a glass fiber separator: the performance booster and anode defender for lithium-sulfurized polyacrylonitrile (SPAN) batteries10.1021/acsaem.3c00163 ↗
71. Elaborate interface design of CoS2/Fe7S8/NG heterojunctions modified on a polypropylene separator for efficient lithium-sulfur batteries10.1016/j.cej.2022.136990 ↗
72. Metallic NiSe2 nanoarrays towards ultralong life and fast Li2S oxidation kinetics of Li-S batteries10.1039/C9TA03361K ↗
73. Nickel embedded porous macrocellular carbon derived from popcorn as sulfur host for high-performance lithium-sulfur batteries10.1016/j.jmst.2020.09.032 ↗
74. The importance of confined sulfur nanodomains and adjoining electron conductive pathways in subreaction regimes of Li-S batteries10.1002/aenm.201700074 ↗
75. Design considerations for lithium-sulfur batteries: mass transport of lithium polysulfides10.1039/D0NR02936J ↗
76. Kinetic analysis of the Li+ ion intercalation behavior of solution derived nano-crystalline lithium manganate thin films10.1016/j.jpowsour.2004.06.056 ↗
77. Mechanism and kinetics of Li2S precipitation in lithium-sulfur batteries10.1002/adma.201501559 ↗
78. Conductive and catalytic triple-phase interfaces enabling uniform nucleation in high-rate lithium-sulfur batteries10.1002/aenm.201802768 ↗