journal article·2023-10

Study on mechanical properties of high-entropy crystal/amorphous composites with pre-existing hole

Chao Yang, Yong-chao Liang, Li-li Zhou, Qian Chen, Bei Wang, Li Zhang, Jia-jun Ma, Ting-hong Gao, Quan Xie

Publisher page

Abstract

In recent years, experiments have shown that it is possible to develop crystal/ amorphous composites (CAC) with high strength and ductility by combining high-entropy alloys and metallic glasses (HE-MGs). In this paper, the rapid solidification of CoNiCrFeMn is simulated by molecular dynamics simulations to obtain HE-MGs, and subsequently holes of different sizes were added inside it for uniaxial tension. The result indicates that the larger hole has better plasticity, but the plasticity increases at the cost of the decrease of strength and hardness. Based on the consideration of strength and plasticity, CoNiCrFeMn HE-MGs with a hole radius of 7.06 Å are selected to examine the effect of the crystal layer thickness on the mechanical properties of CAC. The different distance of the crystal/amorphous interface from the hole is due to the crystal layer thickness. And the interface disperses the localized strain to a larger area by hindering the extension of shear transformation zone, resulting in a more uniform distribution of strain and improving the strength of CAC. In addition, the interface is composed of FCC and other amorphous clusters, and there are three connection modes among them. The growth of interfacial clusters will enhance the strength of CAC. The current work helps to understand the deformation mechanisms of high-entropy CAC at the nanoscale, and may advance the development of metallic materials with a synergy of high strength and ductility.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Amorphization at twin-twin intersected region in FeCoCrNi high-entropy alloy subjected to high-pressure torsion10.1016/j.matchar.2017.02.027 ↗
2. Utilization of high entropy alloy characteristics in Er-Gd-Y-Al-Co high entropy bulk metallic glass10.1016/j.actamat.2018.06.024 ↗
3. Pd20Pt20Cu20Ni20P20 high-entropy alloy as a bulk metallic glass in the centimeter10.1016/j.intermet.2011.05.030 ↗
4. Identifying the origin of strain rate sensitivity in a high entropy bulk metallic glass10.1016/j.scriptamat.2019.02.002 ↗
5. The hardness and related deformation mechanisms in nanoscale crystalline–amorphous multilayers10.1016/j.tsf.2015.01.067 ↗
6. Mechanistic coupling of dislocation and shear transformation zone plasticity in crystalline-amorphous nanolaminates10.1016/j.actamat.2016.07.011 ↗
7. Metallic glass matrix composites10.1016/j.mser.2015.12.001 ↗
8. Plastic deformation mechanism in crystal-glass high entropy alloy composites studied via molecular dynamics simulations10.1016/j.coco.2021.100658 ↗
9. Microstructure evolution and deformation mechanism of amorphous/crystalline high-entropy-alloy composites10.1016/j.jmst.2020.02.070 ↗
10. Control of shear band formation in metallic glasses through introducing nanoscale pores10.1016/j.jnoncrysol.2021.120994 ↗
11. Size effect on the plastic deformation of pre-void Ni/Ni3Al interface under uniaxial tension: a molecular dynamics simulation10.1016/j.commatsci.2018.02.046 ↗
12. Metallic glass-based chiral nanolattice: light weight, auxeticity, and superior mechanical properties10.1016/j.mattod.2017.10.001 ↗
13. Role of amorphous layer and interfaces on the tensile behaviors of triple-phase Ti/Ni nanolaminates: a molecular dynamics study10.1016/j.jallcom.2021.159282 ↗
14. Tensile and nanoindentation deformation of amorphous/crystalline nanolaminates: effects of layer thickness and interface type10.1016/j.commatsci.2018.07.054 ↗
15. Structure and shear deformation of metallic crystalline-amorphous interfaces10.1016/j.actamat.2013.02.047 ↗
16. Assessing the interfacial strength of an amorphous–crystalline interface10.1016/j.actamat.2013.02.019 ↗
17. Response of an amorphous/crystalline interface to nanoindentation: an atomistic study10.1016/j.apsusc.2021.149285 ↗
18. A combined experimental and computational analysis on how material interface mediates plastic flow in amorphous/crystalline composites10.1557/s43578-021-00269-4 ↗
19. Dual-phase nanostructuring as a route to high-strength magnesium alloys10.1038/nature21691 ↗
20. Crystal–glass high-entropy nanocomposites with near theoretical compressive strength and large deformability10.1002/adma.202002619 ↗
21. Understanding the physical metallurgy of the CoCrFeMnNi high-entropy alloy: an atomistic simulation study
22. Molecular dynamics-based analysis of the effect of voids and HCP-Phase inclusion on deformation of single-crystal CoCrFeMnNi high-entropy alloy10.1016/j.msea.2020.139444 ↗
23. J. Xiao, Dislocation Nucleation in CoNiCrFeMn High Entropy Alloy, (2020) 6.10.1016/j.mtla.2020.100749 ↗
24. A. Sharma, Dislocation Dynamics in Al0.1CoCrFeNi High-entropy Alloy under Tensile Loading, (2017) 4.10.1016/j.intermet.2017.08.004 ↗
25. Structure identification methods for atomistic simulations of crystalline materials10.1088/0965-0393/20/4/045021 ↗
26. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
27. Bond-orientational order in liquids and glasses10.1103/PhysRevB.28.784 ↗
28. A new method for analyzing the local structures of disordered systems10.1209/0295-5075/96/36001 ↗
29. Three-dimensional topological structures and formation processes of dislocations in Au nanowire under tension loading10.1016/j.commatsci.2021.110639 ↗
30. Simulation study of the evolution mechanisms of clusters in a large-scale liquid Al system during rapid cooling processes10.1088/0953-8984/15/6/301 ↗
31. Inconsistency of neighborhood based on Voronoi tessellation and Euclidean distance10.1016/j.jallcom.2020.156983 ↗
32. Effect of van der Waals force cut-off distance on adhesive collision parameters in DEM simulation10.1016/j.powtec.2016.05.020 ↗
33. Molecular dynamics study on microstructural evolution during crystallization of rapidly supercooled zirconium melts10.1016/j.jallcom.2016.07.221 ↗
34. Effect of topologically close-packed clusters on glass-forming ability of rapidly supercooled MgCuY alloy10.1016/j.jmrt.2022.05.004 ↗
35. Origin of splitting of the second peak in the pair-distribution function for metallic glasses10.1103/PhysRevB.84.092201 ↗
36. Micromechanism of cold deformation of two-phase polycrystalline Ti–Al alloy with void10.3390/ma12010184 ↗
37. Microstructural mechanisms of tuning the deformation behaviors in annealed metallic glasses10.1016/j.jallcom.2021.160029 ↗
38. Influence of icosahedron and icosahedron-like on plastic deformation of Co50Mn50 alloy under compressive conditions10.1016/j.jnoncrysol.2022.121896 ↗
39. Molecular dynamics study of fracture and plastic deformation of Cu/Cu64Zr36 crystalline/amorphous composites with a pre-existing void10.1016/j.jnoncrysol.2022.121556 ↗
40. Plastic deformation behaviors of amorphous-Cu50Zr50/crystalline-Cu nanolaminated structures by molecular dynamics simulations10.1016/j.jallcom.2016.09.184 ↗
41. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
42. Suppression of the shear band instability during plastic flow of nanometer-scale confined metallic glasses10.1063/1.2821227 ↗
43. A nanoscaled underlayer confinement approach for achieving extraordinarily plastic amorphous thin film10.1016/j.scriptamat.2009.07.010 ↗
44. Mechanical behavior of nanoscale Cu/PdSi multilayers10.1016/j.actamat.2013.04.047 ↗
45. Shear-induced mixing governs codeformation of crystalline-amorphous nanolaminates
46. Correlation between the elastic modulus and the intrinsic plastic behavior of metallic glasses: the roles of atomic configuration and alloy composition10.1016/j.actamat.2009.03.027 ↗