Electrospinning of SiO2-based composites embedded TiO2 nanoparticles with ultra-strong suppression of radiative heat transfer
Source abstract
Abstract
Fibrous aerogel composites have attracted considerable attention in the field of insulation materials due to their low thermal conductivity and elasticity. However, they cannot meet the thermal insulation performance under practical application conditions due to their high infrared radiation transmittance and limited thermal stability. A novel strategy for embedding anatase TiO 2 nanoparticles in SiO 2 nanofibers was reported herein. TiO 2 nanoparticles embedded in SiO 2 nanofibers with bead-on-string structures were prepared through electrospinning, which leads to enhanced binding force between nanofibers and opacifier nanoparticles and uniform dispersion of opacifier in nanofibrous aerogel composites. Combined with freeze-drying technology, nanofibrous aerogel composites with the lamellar structure were prepared, which possessed ultra-low density of 5.8 mg/cm 3 and superior compression strength (6.71 kPa at 40% strain) and fast recovery after compression. In addition, the obtained aerogel composites exhibited low infrared transmittance (60% at 3 µm), thermal conductivity (0.0257 W/mk at room temperature), splendid flame-retardant properties, and thermal insulation properties. The combined structural stability and low infrared transmittance offer an ideal candidate for thermal insulation under extreme conditions.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerogels and thermal insulation · Transition Metal Oxide Nanomaterials · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Hypocrystalline ceramic aerogels for thermal insulation at extreme conditions10.1038/s41586-022-04784-0 ↗
2. Elastic ceramic aerogels for thermal superinsulation under extreme conditions10.1016/j.mattod.2020.09.034 ↗
3. Insulating and robust ceramic nanorod aerogels with high-temperature resistance over 1400 °C10.1021/acsami.1c02501 ↗
4. Physical properties of sodium silicate based silica aerogels prepared by single step sol–gel process dried at ambient pressure10.1016/j.jallcom.2008.09.029 ↗
5. Ultrastrong, superelastic, and lamellar multiarch structured ZrO2-Al2O3 nanofibrous aerogels with high-temperature resistance over 1300 °C10.1021/acsnano.0c06423 ↗
6. Double-negative-index ceramic aerogels for thermal superinsulation10.1126/science.aav7304 ↗
7. Ultralight, recoverable, and high-temperature-resistant SiC nanowire aerogel10.1021/acsnano.7b08577 ↗
8. Fabrication of yttria-stabilized zirconia aerogel for high-performance thermal barrier coating10.1016/j.jallcom.2019.07.156 ↗
9. Hydrophobic and low density silica aerogels dried at ambient pressure using TEOS precursor10.1016/j.jallcom.2008.03.076 ↗
10. Super-insulated, flexible, and high resilient mullite fiber reinforced silica aerogel composites by interfacial modification with nanoscale mullite whisker10.1016/j.compositesb.2021.109549 ↗
11. Ultralight nanofibre-assembled cellular aerogels with superelasticity and multifunctionality10.1038/ncomms6802 ↗
12. Ultralight and fire-resistant ceramic nanofibrous aerogels with temperature-invariant superelasticity10.1126/sciadv.aas8925 ↗
13. Effect of annealing temperature on charge storage kinetics of an electrospun deposited manganese oxide supercapacitor10.1016/j.apsusc.2020.145466 ↗
14. Electrospun 1D f-MWCNTs-TiO2 composite nanofibers for resistive memory and synaptic learning applications10.1016/j.matlet.2020.128587 ↗
15. Facile synthesis of luminescent and amorphous La2O3-ZrO2:Eu3+ nanofibrous membranes with robust softness
16. Soft Zr-doped TiO2 nanofibrous membranes with enhanced photocatalytic activity for water purification10.1038/s41598-017-01969-w ↗
17. In situ synthesis of biomimetic silica nanofibrous aerogels with temperature-invariant superelasticity over one million compressions10.1002/anie.202001679 ↗
18. Highly stretchable, crack-insensitive and compressible ceramic aerogel10.1021/acsnano.1c07755 ↗
19. Infrared-opacified Al2O3–SiO2 aerogel composites reinforced by SiC-coated mullite fibers for thermal insulations10.1016/j.ceramint.2014.08.088 ↗
20. Improvement in the high temperature thermal insulation performance of Y2O3 opacified silica aerogels10.1016/j.jallcom.2017.08.189 ↗
21. Microstructural characterization and properties of ambient-dried SiO2 matrix aerogel doped with opacified TiO2 powder10.1016/j.jallcom.2008.01.154 ↗
22. Hydrophobic in-situ SiO2-TiO2 composite aerogel for heavy oil thermal recovery: Synthesis and high temperature performance10.1016/j.applthermaleng.2021.116745 ↗
23. Improvement of thermal insulation and compressive performance of Al2O3–SiO2 aerogel by doping carbon nanotubes10.1016/j.ceramint.2022.02.178 ↗
24. Optical and radiative properties of infrared opacifier particles loaded in silica aerogels for high temperature thermal insulation10.1016/j.ijthermalsci.2013.03.020 ↗
25. Thermal conductivity of fiber and opacifier loaded silica aerogel composite10.1016/j.ijheatmasstransfer.2017.08.006 ↗
26. Thermally insulating, fiber-reinforced alumina–silica aerogel composites with ultra-low shrinkage up to 1500 °C10.1016/j.cej.2021.128402 ↗
27. Nano-TiO2 coated needle carbon fiber reinforced phenolic aerogel composite with low density, excellent heat-insulating and infrared radiation shielding performance10.1016/j.jmst.2022.12.035 ↗
28. Opacifier embedded and fiber reinforced alumina-based aerogel composites for ultra-high temperature thermal insulation10.1016/j.ceramint.2018.09.223 ↗
29. An electronic synapse device based on TiO2 thin film memristor10.1166/jno.2018.2297 ↗
30. TiO2 based nanostructured memristor for RRAM and neuromorphic applications: a simulation approach10.1186/s40580-016-0076-8 ↗
31. Experimental investigations on the thermal insulation performance of SiC opacifier doped silica aerogel at large temperature difference10.1016/j.ijthermalsci.2020.106681 ↗
32. Radiative heat attenuation mechanisms for nanoporous thermal insulating composites10.1016/j.applthermaleng.2016.05.136 ↗
33. Design and optimization of core/shell structures as highly efficient opacifiers for silica aerogels as high-temperature thermal insulation10.1016/j.ijthermalsci.2018.07.032 ↗
34. Anatase TiO2 single crystals with a large percentage of reactive facets10.1038/nature06964 ↗
35. Nanofibers produced by electrospinning of ultrarigid polymer rods made from designed peptide bundlemers10.1021/acsami.1c04027 ↗
36. Electrospinning of PVP-based ternary composites containing SiO2 nanoparticles and hybrid TiO2 microparticles with adsorbed superoxide radicals10.1016/j.compositesb.2022.109874 ↗
37. Agglomeration and sedimentation of titanium dioxide nanoparticles (n-TiO2) in synthetic and real waters10.1007/s11051-013-1684-4 ↗
38. Kinetics of hematite aggregation by polyacrylic acid: importance of charge neutralization10.1006/jcis.1995.1417 ↗
39. Temperature effect on the aggregation kinetics of CeO2 nanoparticles in monovalent and divalent electrolytes
40. Effect of the agglomeration of TiO2 nanoparticles on their photocatalytic performance in the aqueous phase10.1016/j.jcis.2010.04.045 ↗
41. The influence of surfactant and ultrasonic processing on improvement of stability, thermal conductivity and viscosity of titania nanofluid10.1016/j.expthermflusci.2013.06.001 ↗
42. Hydrophobic/oleophobic nanofibrous filter media with bead-on-string structure for efficient personal protection of dust in mines10.1016/j.envres.2023.115699 ↗
43. Structural and thermal study of highly porous nanocomposite SiO2-based aerogels10.1016/j.jnoncrysol.2010.01.003 ↗
44. Ultralight biomass-derived carbonaceous nanofibrous aerogels with superelasticity and high pressure-sensitivity10.1002/adma.201603143 ↗
45. Interweaved cellular structured ceramic nanofibrous aerogels with superior bendability and compressibility10.1002/adfm.202005928 ↗
46. High-frequency FTIR absorption of SiO2/Si nanowires10.1016/j.cplett.2003.07.015 ↗
47. Sensitization of magnetite@SiO2@TiO2 by cobalt sulfophthalocyanine and investigation of photocatalytic activity of oxygen evolution under visible light10.1016/j.inoche.2023.110401 ↗
48. Uniform TiO2–SiO2 hollow nanospheres: Synthesis, characterization and enhanced adsorption–photodegradation of azo dyes and phenol10.1016/j.apsusc.2014.03.136 ↗
49. Magnetic TiO2–SiO2 hybrid hollow spheres with TiO2 nanofibers on the surface and their formation mechanism
50. Design and electrospun closed cell structured SiO2 nanocomposite fiber by hollow SiO2/TiO2 spheres for thermal insulation10.1016/j.compscitech.2021.109152 ↗
51. Sandwich structured polyamide-6/polyacrylonitrile nanonets/bead-on-string composite membrane for effective air filtration10.1016/j.seppur.2015.08.005 ↗
52. Elastic and highly fatigue resistant ZrO2-SiO2 nanofibrous aerogel with low energy dissipation for thermal insulation
53. Hierarchical cellular structured ceramic nanofibrous aerogels with temperature-invariant superelasticity for thermal insulation10.1021/acsami.9b10018 ↗
54. Boron nitride aerogels with super‐flexibility ranging from liquid nitrogen temperature to 1000 °C
55. Hierarchical SiC fiber aerogel toward microwave attenuation and thermal insulation application10.1016/j.jallcom.2022.165097 ↗
56. Nanocellulose aerogel-based porous coaxial fibers for thermal insulation10.1016/j.nanoen.2019.104305 ↗
57. Multiscale mullite fiber/whisker reinforced silica aerogel nanocomposites with enhanced compressive strength and thermal insulation performance10.1016/j.ceramint.2020.08.013 ↗
58. Heat transfer characteristics of silica aerogel composite materials: structure reconstruction and numerical modeling10.1016/j.ijheatmasstransfer.2015.12.025 ↗
59. Experimental investigations into thermal transport phenomena in vacuum insulation panels (VIPs) using fumed silica cores10.1016/j.enbuild.2015.08.004 ↗