Effect of process induction on densification behavior, microstructure evolution and mechanical properties of Ti-5Al-2.5Sn ELI fabricated by laser powder bed melting
Source abstract
Abstract
In this paper, Ti-5Al-2.5Sn ELI α titanium alloy was prepared by laser powder bed fusion. The effects of heat treatment and HIP process on the densification behavior, microstructure evolution, low-temperature mechanical properties, and fracture behavior of Ti-5Al-2.5Sn ELI titanium alloy were analyzed. The experimental results show that the density of Ti-5Al-2.5Sn ELI titanium alloy is improved after HIP treatment. Complete recrystallization occurred in the deposited microstructure, and the recrystallized α grains coarsened with the increase in holding time. After heat treatment, the tensile strength decreases gradually, while the elongation increases with the increase of holding time. Compared with 300 K, the ultimate tensile strength and yield strength of the sample at 77 K were improved, but the elongation decreased. Ti-5Al-2.5Sn ELI titanium alloy annealed at 850 °C/4 h exhibits mixed ductile-brittle fracture morphology at 77 K and obtains ultrahigh strength and ductility. At the same time, Ti-5Al-2.5Sn ELI titanium alloy exhibits unit slip deformation behavior at 300 K, while at 77 K, it mainly exhibits the coupling of dislocation slip and twin deformation behavior. These findings lay a foundation for the rapid preparation of high-strength α-titanium alloy products with good ductility.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Self-lubricating coating design strategy for titanium alloy by additive manufacturing10.1016/j.apsusc.2022.154333 ↗
2. A strengthening strategy for metastable β titanium alloys: Synergy effect of primary α phase and β phase stability10.1016/j.msea.2022.143736 ↗
3. Enhanced strength-ductility synergy in laser additive manufactured TC4 titanium alloy by grain refinement10.1016/j.matlet.2022.132949 ↗
4. Alleviating plastic anisotropy of boron modified titanium alloy by constructing layered structure via electron beam directed energy deposition
5. Investigation on the deformation mechanism of Ti–5Al-2.5Sn ELI titanium alloy at cryogenic and room temperatures10.1016/j.msea.2021.141380 ↗
6. Fracture toughness at cryogenic temperatures of ultrafine-grained Ti-6Al-4V alloy processed by ECAP10.1016/j.msea.2017.12.106 ↗
7. Densification behavior, microstructure evolution, and mechanical performances of selective laser melted Ti-5Al-2.5Sn α titanium alloy: effect of laser energy input10.1016/j.jallcom.2018.09.153 ↗
8. Study of microstructure, mechanical properties and residual stresses in full penetration electron beam welded Ti-5Al-2.5Sn alloy sheet10.1016/j.matdes.2017.11.009 ↗
9. Effect of heat treatment on microstructure and mechanical properties of the selective laser melting processed Ti-5Al-2.5Sn α titanium alloy10.1016/j.msea.2017.10.061 ↗
10. Constitutive and microstructural characteristics of Ti-5Al-2.5Sn alloy during isothermal and non-isothermal multi-stage hot deformation across different phase regions10.1016/j.jallcom.2022.164647 ↗
11. Tensile and low-cycle fatigue behavior of commercially pure titanium and Ti–5Al–2.5Sn alloy at 293 and 77 K10.1016/S0921-5093(01)01249-7 ↗
12. Effect of laser remelting on deposition quality, residual stress, microstructure, and mechanical property of selective laser melting processed Ti-5Al-2.5Sn alloy10.1016/j.matchar.2019.02.010 ↗
13. Heat-treatment induced microstructural evolution and enhanced mechanical property of selective laser melted near β Ti-5Al-5Mo-5 V-3Cr-1Zr alloy10.1016/j.jallcom.2020.158351 ↗
14. Development of a novel metastable beta titanium alloy with ultrahigh yield strength and good ductility based on laser power bed fusion
15. Mechanical and functional properties of HfH2-decorated NiTi shape memory alloy fabricated by laser powder-bed fusion10.1016/j.jallcom.2022.165296 ↗
16. Preparation, microstructure, and properties of ZrO2(3Y)/Al2O3 bioceramics for 3D printing of all-ceramic dental implants by vat photopolymerization
17. Effect of processing parameters on pore structures, grain features, and mechanical properties in Ti-6Al-4V by laser powder bed fusion
18. Ultrasonic surface post-processing of hot isostatic pressed and heat treated superalloy parts manufactured by laser powder bed fusion
19. In-situ synthesis of TiC/graphene/Ti6Al4V composite coating by laser cladding
20. A crack-free and high-strength Al–Cu–Mg–Mn–Zr alloy fabricated by laser powder bed fusion
21. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium10.1016/j.actamat.2012.04.006 ↗
22. Micro-and meso-structures and their influence on mechanical properties of selectively laser melted Ti-6Al-4V10.1016/j.actamat.2018.05.044 ↗
23. Resistance of direct metal laser sintered Ti6Al4V alloy against growth of fatigue cracks10.1016/j.engfracmech.2017.03.033 ↗
24. Effect of hot isostatic pressing of laser powder bed fused Inconel 625 with purposely induced defects on the residual porosity and fatigue crack propagation behavior
25. Effect of defects on the constant-amplitude fatigue behavior of as-built Ti-6Al-4V alloy produced by laser powder bed fusion process: assessing performance with metallographic analysis and micromechanical simulations
26. Analysis of the effect of internal defects on fatigue performance of additive manufactured metals10.1016/j.msea.2020.139385 ↗
27. Selective laser melting of Ti-5Al-2.5Sn alloy with isotropic tensile properties: the combined effect of densification state, microstructural morphology, and crystallographic orientation characteristics10.1016/j.jmatprotec.2019.04.003 ↗
28. Achieving high tensile strength-ductility synergy of a fully-lamellar structured near alpha titanium alloy at extra-low temperatures10.1016/j.jallcom.2022.166363 ↗
29. Hot isostatic pressing of Cu–15Ni–8Sn alloy with suppressed Sn macro-segregation and enhanced mechanical properties10.1016/j.msea.2022.143866 ↗
30. Selective laser melting of weak-textured commercially pure titanium with high strength and ductility: A study from laser power perspective10.1016/j.matdes.2016.12.019 ↗
31. On the texture formation of selective laser melted Ti-6AI-4V10.1007/s11661-014-2218-0 ↗
32. Investigation on mechanical properties and microstructural evolution of TC6 titanium alloy subjected to laser peening at cryogenic temperature10.1016/j.msea.2018.07.093 ↗
33. The onset of twinning in metals: a constitutive description10.1016/S1359-6454(01)00300-7 ↗
34. Thermostastitical modelling of deformation twinning in HCP metals10.1016/j.ijplas.2013.09.006 ↗
35. Dynamic recrystallization of titanium: Effect of pre-activated twinning at cryogenic temperature10.1016/j.actamat.2018.05.057 ↗