Study on colloidal synthesis of ZnS nanospheres embedded in reduced graphene oxide materials for sodium-ion batteries and energy storage mechanism
Source abstract
Abstract
With growing demands for large-scale energy storage, metal sulfides have received great attention due to their high theoretical capacity as anode materials for sodium-ion batteries (SIBs). However, metal sulfides have a problem of poor stability. Thus, it is important to find suitable solutions. In this work, uniform ZnS nanospheres (ZnS NSs) are synthesized through a wet chemical method. And then, by compounding with reduced graphene oxide (rGO), ZnS [email protected] are synthesized in which ZnS NSs are evenly distributed on rGO. When we evaluate the cycle performance, ZnS [email protected] deliver a high discharge capacity of 634.6 mA h g−1 at a current density of 0.5 Ag−1 after 1000 cycles. Through charge/discharge processes of in-situ XRD analysis, we confirm the sodiation/desodiation mechanism of ZnS [email protected]
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Leveraging valuable synergies by combining alloying and conversion for lithium-ion anodes10.1039/C6EE02346K ↗
2. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
3. Structural power composites10.1016/j.compscitech.2014.06.020 ↗
4. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
5. The application of metal sulfides in sodium ion batteries10.1002/aenm.201601329 ↗
6. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
7. B. Dunn, H. Kamath, J.-M. Tarascon, Electrical Energy Storage for the Grid: A Battery of Choices System power ratings, module size, n.d. www.sciencemag.org.
8. Electrode materials for rechargeable sodium-ion batteries: Potential alternatives to current lithium-ion batteries10.1002/aenm.201200026 ↗
9. Research development on sodium-ion batteries10.1021/cr500192f ↗
10. Carbon anode materials for advanced sodium-ion batteries10.1002/aenm.201602898 ↗
11. Hard carbon nanoparticles as high-capacity, high-stability anodic materials for Na-ion batteries10.1016/j.nanoen.2015.10.034 ↗
12. Na-ion batteries, recent advances and present challenges to become low cost energy storage systems10.1039/c2ee02781j ↗
13. The mechanisms of lithium and sodium insertion in carbon materials10.1149/1.1379565 ↗
14. Na-ion versus Li-ion batteries: complementarity rather than competitiveness10.1016/j.joule.2020.06.003 ↗
15. Sodium-ion battery anodes: Status and future trends10.1016/j.enchem.2019.100012 ↗
16. Three-dimensional hierarchical porous hard carbon for excellent sodium/potassium storage and mechanism investigation
17. Metal sulfide hollow nanostructures for electrochemical energy storage10.1002/aenm.201501333 ↗
18. Promises and challenges of alloy-type and conversion-type anode materials for sodium–ion batteries10.1016/j.mtener.2018.10.017 ↗
19. MoS2/graphene composite anodes with enhanced performance for sodium-ion batteries: the role of the two-dimensional heterointerface10.1002/adfm.201404078 ↗
20. Dandelion-Like Bi2S3/rGO hierarchical microspheres as high-performance anodes for potassium-ion and half/full sodium-ion batteries10.1007/s12274-021-3407-y ↗
21. High-capacity antimony sulphide nanoparticle-decorated graphene composite as anode for sodium-ion batteries10.1038/ncomms3922 ↗
22. A flexible film with SnS2 nanoparticles chemically anchored on 3D-graphene framework for high areal density and high rate sodium storage
23. Enhancing the cycling stability of Na-ion batteries by bonding SnS2 ultrafine nanocrystals on amino-functionalized graphene hybrid nanosheets10.1039/C5EE03262H ↗
24. Electrochemical mechanism of Li insertion/extraction in ZnS and ZnS/C anodes for Li-ion batteries10.1016/j.electacta.2018.01.158 ↗
25. ZnS nanoparticles embedded in reduced graphene oxide as high performance anode material of sodium-ion batteries10.1016/j.electacta.2016.01.116 ↗
26. Self-templated formation of hierarchically yolk-shell-structured ZnS/NC dodecahedra with superior lithium storage properties10.1039/D0NR07450K ↗
27. Urchinlike ZnS microspheres decorated with nitrogen-doped carbon: a superior anode material for lithium and sodium storage10.1002/chem.201604532 ↗
28. One‐pot hydrothermal synthesis of ZnS nanospheres anchored on 3D conductive MWCNTs networks as high‐rate and cold‐resistant anode materials for sodium‐ion batteries10.1002/celc.202000204 ↗
29. Cobalt-doped FeS 2 nanospheres with complete solid solubility as a high-performance anode material for sodium-ion batteries10.1002/ange.201607469 ↗
30. An advanced MoS2/carbon anode for high-performance sodium-ion batteries10.1002/smll.201401521 ↗
31. One-pot hydrothermal synthesis of ZnS quantum dots/graphene hybrids as a dual anode for sodium ion and lithium ion batteries10.1016/j.apsusc.2017.12.110 ↗
32. Facile synthesis of ZnS/N,S Co-doped carbon composite from zinc metal complex for high-performance sodium-ion batteries10.1021/acsami.7b15659 ↗
33. One-pot hydrothermal synthesis of reduced graphene oxide/carbon nanotube/α-Ni(OH)2 composites for high performance electrochemical supercapacitor10.1016/j.jpowsour.2013.04.076 ↗
34. Electrochemical performances investigation of NiS/rGO composite as electrode material for supercapacitors10.1016/j.nanoen.2014.02.006 ↗
35. Reducing polarization of lithium-sulfur batteries via ZnS/reduced graphene oxide accelerated lithium polysulfide conversion
36. In situ synthesis of MnS hollow microspheres on reduced graphene oxide sheets as high-capacity and long-life anodes for Li- and Na-ion batteries10.1021/acsami.5b06590 ↗
37. Ultrafine ZnS quantum dots decorated reduced graphene oxide composites derived from ZIF-8/graphene oxide hybrids as anode for sodium-ion batteries10.1016/j.jallcom.2018.11.122 ↗
38. Unique cobalt sulfide/reduced graphene oxide composite as an anode for sodium-ion batteries with superior rate capability and long cycling stability10.1002/smll.201502788 ↗
39. A ZnS nanocrystal/reduced graphene oxide composite anode with enhanced electrochemical performances for lithium-ion batteries10.1039/C6CP06609G ↗
40. 3D graphene network encapsulating mesoporous ZnS Nanospheres as high-performance anode material in sodium-ion batteries10.1002/celc.201800412 ↗
41. ZnS nanoparticles decorated on nitrogen-doped porous carbon polyhedra: a promising anode material for lithium-ion and sodium-ion batteries10.1039/C7TA06180C ↗
42. Graphitic carbon nitride (g-C3N4)-derived N-rich graphene with tuneable interlayer distance as a high-rate anode for sodium-ion batteries
43. Na+ intercalation pseudocapacitance in graphene-coupled titanium oxide enabling ultra-fast sodium storage and long-term cycling
44. Cobalt disulfide nanoparticles embedded in porous carbonaceous micro-polyhedrons interlinked by carbon nanotubes for superior lithium and sodium storage10.1021/acsnano.8b03188 ↗
45. Applications of voltammetry in lithium ion battery research10.33961/jecst.2019.00619 ↗
46. High-rate electrochemical energy storage through Li + intercalation pseudocapacitance10.1038/nmat3601 ↗
47. Definitions of pseudocapacitive materials: a brief review10.1002/eem2.12028 ↗
48. Heterostructured nanocube-shaped binary sulfide (SnCo)S 2 interlaced with S-doped graphene as a high-performance anode for advanced Na + batteries
49. MXene conversion to V2S3 heterostructure in CS2 ambient: a novel approach for sodium-ion battery anodes10.1016/j.mtener.2022.101184 ↗
50. Synergistical coupling interconnected ZnS/SnS 2 nanoboxes with polypyrrole-derived N/S dual-doped carbon for boosting high-performance sodium storage10.1002/smll.201804861 ↗
51. Self-assembled hierarchical MoO2/graphene nanoarchitectures and their application as a high-performance anode material for lithium-ion batteries10.1021/nn201802c ↗
52. Na-Mn-O nanocrystals as a high capacity and long life anode material for Li-ion batteries
53. In-built durable Li–S counterparts from Li–TiS2 batteries
54. Surface engineering of anode materials for improving sodium-ion storage performance10.1039/D1TA09567F ↗
55. CuCo2S4–rGO microflowers: first-principle calculation and application in energy storage
56. Solution chemistry of self-assembled graphene nanohybrids for high-performance flexible biosensors10.1021/nn100145x ↗