journal article·2022-12

New Co-Cr-Mo-Nb-Cu alloy for implant applications: Properties characterization

Sara Mohammad Moradi, Shahab Zangeneh, Shirin Vardak, Reza Bahrami

Publisher page

Abstract

In this research, a novel antibacterial alloy was fabricated through the addition of Cu and Nb to the conventional Co-Cr-Mo (CCM) alloy. Tungsten inert gas (TIG) welding was utilized to add Cu and Nb to the CCM alloy by surface re-melting. The microstructural investigations revealed that the addition of Cu and Nb to the CCM alloy resulted in significant changes. It was also concluded that the addition of Nb up to the optimum value of 0.2 wt%Nb increased the wear resistance, however, no significant effect was observed on corrosion resistance. Moreover, it has been found that the optimum alloy showed higher charge transfer resistance ( R ct ) in SBF solution and also better protein adsorption. In addition, it was concluded that the modification of the CCM alloy with 4.5%wt Cu and 0.2 wt%Nb led to a decrease in the Co concentration released in SBF solution, and boosted the antibacterial property of the CCM alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants - a review article10.1016/j.jallcom.2017.04.231 ↗
2. Biomedical implants: corrosion and its prevention - a review10.2174/1877610801002010040 ↗
3. J. Park, Lakes, R.S., Biomaterials, An Introduction, 2007.10.1007/978-0-387-37880-0 ↗
4. B.-G. Hastings, Handbook of Biomaterial Properties, 1998.
5. Microstructural characterization of TIG surface treating in Co-Cr-Mo-C alloy10.1016/j.matchar.2017.08.017 ↗
6. Additive manufacturing of Co-Cr-Mo alloy: influence of heat treatment on microstructure, tribological, and electrochemical properties10.3389/fmech.2015.00002 ↗
7. Effect of proteins on the surface microstructure evolution of a CoCrMo alloy in bio-tribocorrosion processes10.1016/j.colsurfb.2016.05.002 ↗
8. The effect of hyaluronic acid on the corrosion of an orthopedic CoCrMo-alloy in simulated inflammatory conditions
9. A new antibacterial Co-Cr-Mo-Cu alloy: preparation, biocorrosion, mechanical and antibacterial property10.1016/j.msec.2016.05.028 ↗
10. Tribological performance of surface engineered tool steel at elevated temperatures10.1016/j.ijrmhm.2009.07.009 ↗
11. A correlation between tribological behavior and crystal structure of cobalt-based hardfacings10.1016/j.wear.2019.01.091 ↗
12. Effects of Ti addition on microstructure homogenization and wear resistance of wide-band laser clad Ni60/WC composite coatings10.1016/j.ijrmhm.2016.11.002 ↗
13. Surface modification of AISI 4340 steel by multi-pass TIG arcing process10.1016/j.jmatprotec.2017.06.035 ↗
14. On microstructural homogenization and mechanical properties optimization of biomedical Co-Cr-Mo alloy additively manufactured by using electron beam melting
15. Surface modification of Co–Cr–Mo implant alloy by laser interference lithography10.1016/j.triboint.2016.01.039 ↗
16. Antibacterial properties of Ti–6Al–4V–xCu alloys10.1016/j.jmst.2013.12.014 ↗
17. Optimization of mechanical property, antibacterial property and corrosion resistance of Ti-Cu alloy for dental implant10.1016/j.jmst.2019.03.044 ↗
18. Effect of Cu content on the antibacterial activity of titanium-copper sintered alloys10.1016/j.msec.2013.11.028 ↗
19. A new antibacterial titanium-copper sintered alloy: preparation and antibacterial property10.1016/j.msec.2013.06.016 ↗
20. Influence of Mo concentration on corrosion resistance to HF acid solution of Ni–Co–Cr–Mo alloys with and without Cu10.1016/j.corsci.2015.07.004 ↗
21. Corrosion resistance of Cu- and Fe-modified Ni–30Co–16Cr–15Mo alloy in aqueous hydrofluoric acid10.1016/j.corsci.2014.08.010 ↗
22. Study on antibacterial performance of Cu-bearing cobalt-based alloy10.1016/j.matlet.2014.05.020 ↗
23. Hot deformation behavior of an antibacterial Co–29Cr–6Mo–1.8Cu alloy and its effect on mechanical property and corrosion resistance10.1016/j.jmst.2016.09.025 ↗
24. Effect of copper addition on mechanical properties, corrosion resistance and antibacterial property of 316L stainless steel10.1016/j.msec.2016.11.022 ↗
25. Antimicrobial Cu-bearing stainless steel scaffolds10.1016/j.msec.2016.06.038 ↗
26. Antibacterial performance of a cu-bearing stainless steel against microorganisms in tap water10.1016/j.jmst.2014.11.016 ↗
27. Effect of surface passivation on corrosion resistance and antibacterial properties of Cu-bearing 316L stainless steel10.1016/j.apsusc.2016.06.036 ↗
28. Pitting corrosion behaviour of austenitic stainless steels with Cu and Sn additions10.1016/j.corsci.2006.06.004 ↗
29. Influence of niobium on the microstructure and wear resistance of iron-based hardfacings produced by pre-placement technique-a novel approach10.1007/s00170-017-0708-0 ↗
30. Enhancement of wear resistance and impact toughness of as cast hypoeutectic high chromium cast iron using niobium10.1080/13640461.2017.1366144 ↗
31. Effect of niobium on the corrosion behaviour of low alloy steel in sulfuric acid solution10.1016/j.corsci.2010.06.010 ↗
32. The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings10.1016/j.matdes.2016.03.081 ↗
33. Effect of Nb addition on the microstructure and corrosion resistance of ferritic stainless steel10.1007/s00339-020-3383-1 ↗
34. Comprehensive investigation of the role of Nb on the oxidation kinetics of Zr-Nb alloys10.1016/j.corsci.2019.04.017 ↗
35. Influence of Nb content on grain size and mechanical properties of 18wt% Cr ferritic stainless steel10.1016/j.msea.2016.09.080 ↗
36. Grain character and mechanical properties of Fe-21Cr-15Ni-6Mn-Nb non-magnetic stainless steel after solution treatment10.1016/j.msea.2018.02.056 ↗
37. Microstructure, phase composition and mechanical properties of new, low cost Ti-Mn-Nb alloys for biomedical applications10.1016/j.jallcom.2019.02.116 ↗
38. B.D. Cullity, Elements of X-RAY Diffraction, 1978.
39. ASTM G99, Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, 2016.
40. STM F732-00, Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses, 2000.
41. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
42. Microstructure and hardness properties investigation of Ti and Nb added FeNiAlCuCrTi x Nb y high entropy alloys10.1007/s12666-013-0265-7 ↗
43. Corrosion resistance of Co-Cr-Mo alloy used in dentistry10.1515/amm-2015-0084 ↗
44. Microstructure and mechanical properties of AISI 316L produced by directed energy deposition-based additive manufacturing: a review10.3390/app10093310 ↗
45. D.A. Porter, K.E. Easterling, M. Sheri, Phase Transformations in Metals and Alloys, 2009.10.1201/9781439883570 ↗
46. An investigation of the effect of direct metal deposition parameters on the characteristics of the deposited layers10.1016/j.csite.2014.02.002 ↗
47. The phase stability and mechanical properties of Nb–C system: using first-principles calculations and nano-indentation10.1016/j.jallcom.2013.01.200 ↗
48. The effect of microstructure on the wear of cobalt-based alloys used in metal-on-metal hip implants10.1243/09544119JEIM110 ↗
49. Effect of different carbides on the wear resistance of Fe-based hardfacing alloys10.1016/j.ijrmhm.2018.10.014 ↗
50. Isothermal aging effect on the microstructure and dry sliding wear behavior of Co–28Cr–5Mo–0.3C alloy10.1007/s10853-011-5686-2 ↗
51. Tanzi · 2019 · 199
52. Effects of Cu addition on the corrosion behavior of NiCoCrMo alloys in neutral chloride solution10.1039/C7RA05617F ↗
53. Regulating the passive film of NiCoCrMo alloy in hydrofluoric acid solution by small addition of Cu10.1016/j.corsci.2015.05.024 ↗
54. The influence of minor alloying elements (Nb, Ti and Cu) on the corrosion resistivity of ferritic stainless steel in sulfuric acid solution10.1016/0010-938X(86)90085-5 ↗
55. Optimization of silver nanoparticles modified pencil graphite electrodes via altering sputtering condition and addition of graphene10.1016/j.jallcom.2020.157295 ↗
56. Adsorption of bovine serum albumin on CoCrMo surface: effect of temperature and protein concentration10.1016/j.colsurfb.2010.05.005 ↗
57. Effects of bovine serum albumin on the corrosion behaviour of AISI 316L, Co–28Cr–6Mo, and Ti–6Al–4V alloys in phosphate buffered saline solutions10.1016/j.corsci.2011.06.009 ↗
58. S. Issa, Functionalization of Titanium Surface for Dental Implants Design, Université Paris-Est, 2015.
59. MS2-affinity purification coupled with RNA sequencing approach in the human pathogen Staphylococcus aureus10.1016/bs.mie.2018.08.022 ↗
60. Preparation and antibacterial effects of Ag–SiO2 thin films by sol–gel method10.1016/S0142-9612(03)00415-0 ↗
61. Antimicrobial effect of copper alloys on Acinetobacter species isolated from infections and hospital environment10.1186/s13756-018-0300-x ↗
62. Bactericidal activity of copper and niobium–alloyed austenitic stainless steel10.1007/s00284-006-0193-4 ↗
63. Antibacterial effect of copper on microorganisms isolated from bovine mastitis10.3389/fmicb.2016.00626 ↗
64. Antimicrobial effect of copper surfaces on bacteria isolated from poultry meat10.1016/j.bjm.2018.06.008 ↗