Study on the nucleation and growth of In2O3 powders for oxide ceramic targets
Source abstract
Abstract
In this work, the precipitation nucleation and the growth mechanism during the preparation of In 2O 3 powders are studied in detail, laying a foundation for the preparation of high-quality In-based oxide target powders. The effects of ball milling, precipitation reaction temperature, and calcination treatment on the powder phase, particle size, particle shape, and crystallinity are explored. Moreover, the diffusion mechanism during the calcination process is analyzed. The results show that the ball milling process causes the In(OH) 3 structure to transform from amorphous to crystalline, and the ball milling process can result in the agglomeration of precursor nanoparticles; the calcined powders also exhibit this behavior. The increase in the precipitation temperature of the precursor is beneficial for the refinement and homogenization of the In 2O 3 powder, but an abnormal grain growth occurs when the temperature is too high. In addition, at a calcination temperature of 350 °C, the In 2O 3 powder crystallization is incomplete, and In(OH) 3 is observed in the powder. With the increase in the calcination temperature, the average grain size rapidly increases from 47.68 nm (700 °C) to 1250 nm (1400 °C). The dependence of the kinetic index of the growth process on the calcination temperature exhibits an opposite trend with respect to that of the growth rate. At a calcination temperature of 1050 °C, the kinetic index is the smallest ( n = 3.96), and the activation energy increases suddenly, while the grain growth rate is the highest (the holding time increases from 1 to 7 h, and the grains grow by 61.64 %).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · ZnO doping and properties · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Facile hydrothermal synthesis of mesoporous In2O3 nanoparticles with superior formaldehyde-sensing properties10.1016/j.physe.2017.10.020 ↗
2. Hydrothermal synthesis of In2O3 nanocubes for highly responsive and selective ethanol gas sensing10.1016/j.jallcom.2019.153133 ↗
3. ITO/Ag/ITO multilayer films for the application of a very low resistance transparent electrode10.1016/S0040-6090(98)01556-9 ↗
4. Simple route for synthesis of tin dioxide nanorods based on improved solid state reactions10.1179/175355511X13240279340165 ↗
5. Evolution of microstructure of IGZO ceramic target during magnetron sputtering10.1016/j.ceramint.2021.11.294 ↗
6. Electrical and optical characteristics of ITO films by pulsed laser deposition using a 10 wt % SnO2-doped In2O3 ceramic target10.1016/j.tsf.2004.08.032 ↗
7. Crystallization and electrical properties of ITO:Ce thin films for flat panel display applications10.1016/j.tsf.2009.01.182 ↗
8. A new strategy of binary-size particles model for fabricating fine grain, high density and low resistivity ITO target10.1016/j.ceramint.2020.02.152 ↗
9. Impact of hydrogen dopant incorporation on InGaZnO, ZnO and In2O3 thin film transistors10.1039/C9CP05050G ↗
10. Microstructure and phase transformation of IGZO targets with different stoichiometry during sintering10.1016/j.ceramint.2020.01.060 ↗
11. Study on powder preparation of IGZO target and its effect on sintering10.1016/j.jallcom.2019.06.031 ↗
12. Anomalous optical behavior in pyramid-like indium oxide (In2O3) nanostructures
13. Size-Controllable Growth of Single Crystal In(OH)3 and In2O3 Nanocubes10.1021/cg049914d ↗
14. CVD growth of In2O3 nanowires using a mixed source of indium and indium chloride10.1149/1.2952822 ↗
15. Synthesis and field-emission properties of In2O3 nanostructures10.1016/j.matlet.2008.01.022 ↗
16. Effect of thermal annealing on the structure of LiCoO2 powders prepared by co-precipitation method10.1016/j.radphyschem.2021.109766 ↗
17. Synthesis and hydration behaviour of calcium zirconium aluminate powders by modifying co-precipitation method10.1016/j.ceramint.2019.09.228 ↗
18. Synthesis and properties of barium ferrite nano-powders by chemical co-precipitation method10.1016/j.jmmm.2018.10.044 ↗
19. Selective ppb-level ozone gas sensor based on hierarchical branch-like In2O3 nanostructure10.1016/j.snb.2021.129612 ↗
20. Gas sensitive properties of nanometer materials In2O3 synthesized by chemical precipitation10.1007/s11741-006-0090-x ↗
21. Nonisothermal crystallization behavior of micron-sized Mg85Ni5Y10 amorphous wires10.1016/j.jnoncrysol.2022.121412 ↗
22. Crystallization kinetics of amorphous selenium prepared by ball milling technique: evidence of three crystallization regimes10.1016/j.matchemphys.2013.05.068 ↗
23. Hallmarks of mechanochemistry: from nanoparticles to technology10.1039/c3cs35468g ↗
24. Experimental investigation of band structure modification in silicon nanocrystals10.1103/PhysRevB.64.115308 ↗
25. Photoluminescence from mechanically milled Si and SiO2 powders10.1103/PhysRevB.55.7615 ↗
26. Using Discrete Element method (DEM) simulations to reveal the differences in the γ-Al2O3 to α-Al2O3 mechanically induced phase transformation between a planetary ball mill and an attritor mill10.1016/j.mineng.2020.106374 ↗
27. The Scherrer equation versus the 'Debye-Scherrer equation'10.1038/nnano.2011.145 ↗
28. Unveiling crystallization mechanism for controlling nanocrystalline structure in glasses10.1016/j.jeurceramsoc.2020.01.014 ↗
29. Size- and surface-determined transformations: from ultrathin InOOH nanowires to uniform c-In2O3 nanocubes and rh-In2O3 nanowires10.1021/ic802449w ↗
30. Optical, electrical and sensing properties of In2O3 nanoparticles10.1016/j.mssp.2012.12.009 ↗
31. Grain growth kinetics and densification mechanism of (TiZrHfVNbTa)C high-entropy ceramic under pressureless sintering10.1016/j.jmst.2021.08.070 ↗
32. Nanocrystalline yttria: Grain growth depression by thermal annealing in air10.1016/j.scriptamat.2015.04.002 ↗
33. Study of crystallization behavior and kinetics of ZrO2-3Y2O3-xSrO (1≤x≤3) precursor powders using an isothermal process10.1016/j.ceramint.2016.06.156 ↗